1 line
221 KiB
Plaintext
1 line
221 KiB
Plaintext
[{"curValue":"用来存放日志 配置 报警的数据的根目录","keyValue":"用来存放日志 配置 报警的数据的根目录","lasttime":"用来存放日志 配置 报警的数据的根目录","valueList":["用来存放日志 配置 报警的数据的根目录","用来存放日志 配置 报警的数据的根目录","用来存放日志 配置 报警的数据的根目录"]},{"curValue":"执行完成","keyValue":"执行完成","lasttime":"执行完成","valueList":["执行完成","执行完成","执行完成"]},{"curValue":"接料机","keyValue":"接料机","lasttime":"接料机","valueList":["接料机","Pick up machine","接料机"]},{"curValue":"日志缓冲区的最大数量","keyValue":"日志缓冲区的最大数量","lasttime":"日志缓冲区的最大数量","valueList":["日志缓冲区的最大数量","bufferCount","日志缓冲区的最大数量"]},{"curValue":"数据文件夹","keyValue":"数据文件夹","lasttime":"数据文件夹","valueList":["数据文件夹","dataDirctory","数据文件夹"]},{"curValue":"未找到语言数据文件","keyValue":"未找到语言数据文件","lasttime":"未找到语言数据文件","valueList":["未找到语言数据文件","language files not exist","未找到语言数据文件"]},{"curValue":"应用程序名称","keyValue":"应用程序名称","lasttime":"应用程序名称","valueList":["应用程序名称","application name","应用程序名称"]},{"curValue":"进入设置选项时的管理员密码","keyValue":"进入设置选项时的管理员密码","lasttime":"进入设置选项时的管理员密码","valueList":["进入设置选项时的管理员密码","password for adm","进入设置选项时的管理员密码"]},{"curValue":"管理员密码","keyValue":"管理员密码","lasttime":"管理员密码","valueList":["管理员密码","adpwd","管理员密码"]},{"curValue":"1：开发调试时模拟运行，0:正常运行，","keyValue":"1：开发调试时模拟运行，0:正常运行，","lasttime":"1：开发调试时模拟运行，0:正常运行，","valueList":["1：开发调试时模拟运行，0:正常运行，","1simulation run，0:normal operation，","1：开发调试时模拟运行，0:正常运行，"]},{"curValue":"模拟运行","keyValue":"模拟运行","lasttime":"模拟运行","valueList":["模拟运行","operation simulation","模拟运行"]},{"curValue":"1：表示在软件关闭时会自动保存参数，0:不自动保存，","keyValue":"1：表示在软件关闭时会自动保存参数，0:不自动保存，","lasttime":"1：表示在软件关闭时会自动保存参数，0:不自动保存，","valueList":["1：表示在软件关闭时会自动保存参数，0:不自动保存，","Auto_save","1：表示在软件关闭时会自动保存参数，0:不自动保存，"]},{"curValue":"关闭软件自动保存参数","keyValue":"关闭软件自动保存参数","lasttime":"关闭软件自动保存参数","valueList":["关闭软件自动保存参数","Auto_save","关闭软件自动保存参数"]},{"curValue":"1:所有硬件都为调试模式，0：使用硬件内部的调试标志位 -1：全部都为正常运行模式","keyValue":"1:所有硬件都为调试模式，0：使用硬件内部的调试标志位 -1：全部都为正常运行模式","lasttime":"1:所有硬件都为调试模式，0：使用硬件内部的调试标志位 -1：全部都为正常运行模式","valueList":["1:所有硬件都为调试模式，0：使用硬件内部的调试标志位 -1：全部都为正常运行模式","1 hardward are debug model，0：remark positon -1：all normal operation model","1:所有硬件都为调试模式，0：使用硬件内部的调试标志位 -1：全部都为正常运行模式"]},{"curValue":"调试模式","keyValue":"调试模式","lasttime":"调试模式","valueList":["调试模式","debug model","调试模式"]},{"curValue":"日志保存天数","keyValue":"日志保存天数","lasttime":"日志保存天数","valueList":["日志保存天数","log saving days","日志保存天数"]},{"curValue":"图像保存天数","keyValue":"图像保存天数","lasttime":"图像保存天数","valueList":["图像保存天数","days of graphic saving","图像保存天数"]},{"curValue":"1表示使用 0表示不使用","keyValue":"1表示使用 0表示不使用","lasttime":"1表示使用 0表示不使用","valueList":["1表示使用 0表示不使用","1.use 0.nonuse","1表示使用 0表示不使用"]},{"curValue":"是否使用扫码枪","keyValue":"是否使用扫码枪","lasttime":"是否使用扫码枪","valueList":["是否使用扫码枪","enable to scanner","是否使用扫码枪"]},{"curValue":"发送心跳包时间间隔 单位s","keyValue":"发送心跳包时间间隔 单位s","lasttime":"发送心跳包时间间隔 单位s","valueList":["发送心跳包时间间隔 单位s","interval time of sending heartbeating package unit :s","发送心跳包时间间隔 单位s"]},{"curValue":"测试通讯时间间隔","keyValue":"测试通讯时间间隔","lasttime":"测试通讯时间间隔","valueList":["测试通讯时间间隔","interval time of testing communication","测试通讯时间间隔"]},{"curValue":"通信心跳包：向目标发送是测试命令,用来判断设备是否通信正常","keyValue":"通信心跳包：向目标发送是测试命令,用来判断设备是否通信正常","lasttime":"通信心跳包：向目标发送是测试命令,用来判断设备是否通信正常","valueList":["通信心跳包：向目标发送是测试命令,用来判断设备是否通信正常","commuination heartbeating package:send command to test whether communication is ok ","通信心跳包：向目标发送是测试命令,用来判断设备是否通信正常"]},{"curValue":"通信心跳包：发送测试命令后，设备返回的结果所包含的部分字符串,如果包含则表示通信正常","keyValue":"通信心跳包：发送测试命令后，设备返回的结果所包含的部分字符串,如果包含则表示通信正常","lasttime":"通信心跳包：发送测试命令后，设备返回的结果所包含的部分字符串,如果包含则表示通信正常","valueList":["通信心跳包：发送测试命令后，设备返回的结果所包含的部分字符串,如果包含则表示通信正常","communication heartbeating package:after sending test command,the return results from device contains part of the characters string,if including,the commuication system is normal. ","通信心跳包：发送测试命令后，设备返回的结果所包含的部分字符串,如果包含则表示通信正常"]},{"curValue":"设置与设备通信时的结束符，如欧姆龙和松下的结束符都为\\r","keyValue":"设置与设备通信时的结束符，如欧姆龙和松下的结束符都为\\r","lasttime":"设置与设备通信时的结束符，如欧姆龙和松下的结束符都为\\r","valueList":["设置与设备通信时的结束符，如欧姆龙和松下的结束符都为\\r","set for close char of communication ,like Omron and Panasonic's is \\r","设置与设备通信时的结束符，如欧姆龙和松下的结束符都为\\r"]},{"curValue":"连接或通讯失败后重试时间间隔 单位是ms","keyValue":"连接或通讯失败后重试时间间隔 单位是ms","lasttime":"连接或通讯失败后重试时间间隔 单位是ms","valueList":["连接或通讯失败后重试时间间隔 单位是ms","interval time after connect failure ,unit:ms ","连接或通讯失败后重试时间间隔 单位是ms"]},{"curValue":"连接或通讯失败后重试时间间隔","keyValue":"连接或通讯失败后重试时间间隔","lasttime":"连接或通讯失败后重试时间间隔","valueList":["连接或通讯失败后重试时间间隔","interval time of retry","连接或通讯失败后重试时间间隔"]},{"curValue":"设置通信读取返回值的最大超时时间 单位是ms","keyValue":"设置通信读取返回值的最大超时时间 单位是ms","lasttime":"设置通信读取返回值的最大超时时间 单位是ms","valueList":["设置通信读取返回值的最大超时时间 单位是ms"," the MAX OT of returning unit:MS","设置通信读取返回值的最大超时时间 单位是ms"]},{"curValue":"超时设置","keyValue":"超时设置","lasttime":"超时设置","valueList":["超时设置","OT setting","超时设置"]},{"curValue":"设置通信读取单帧返回值的最大超时时间 单位是ms","keyValue":"设置通信读取单帧返回值的最大超时时间 单位是ms","lasttime":"设置通信读取单帧返回值的最大超时时间 单位是ms","valueList":["设置通信读取单帧返回值的最大超时时间 单位是ms","set for reading the max Ot of returning , ms","设置通信读取单帧返回值的最大超时时间 单位是ms"]},{"curValue":"单帧超时设置","keyValue":"单帧超时设置","lasttime":"单帧超时设置","valueList":["单帧超时设置","single frame OT set","单帧超时设置"]},{"curValue":"1:设备为开发调试模式，0：正常运行模式","keyValue":"1:设备为开发调试模式，0：正常运行模式","lasttime":"1:设备为开发调试模式，0：正常运行模式","valueList":["1:设备为开发调试模式，0：正常运行模式","1.debug model 0.normal operation","1:设备为开发调试模式，0：正常运行模式"]},{"curValue":"是否调试模式","keyValue":"是否调试模式","lasttime":"是否调试模式","valueList":["是否调试模式","enable debug model option","是否调试模式"]},{"curValue":"是否实时保存所有的硬件的所有通讯数据","keyValue":"是否实时保存所有的硬件的所有通讯数据","lasttime":"是否实时保存所有的硬件的所有通讯数据","valueList":["是否实时保存所有的硬件的所有通讯数据","save all current date option","是否实时保存所有的硬件的所有通讯数据"]},{"curValue":".仅表示分隔符，如2800.02表示 ， 实时的读plc的R区从起始地址2800开始往后2个字","keyValue":".仅表示分隔符，如2800.02表示 ， 实时的读plc的R区从起始地址2800开始往后2个字","lasttime":".仅表示分隔符，如2800.02表示 ， 实时的读plc的R区从起始地址2800开始往后2个字","valueList":[".仅表示分隔符，如2800.02表示 ， 实时的读plc的R区从起始地址2800开始往后2个字","separator ,for example :2800.02 means current read PLC a address strat from R zone 2800,after 2 character ",".仅表示分隔符，如2800.02表示 ， 实时的读plc的R区从起始地址2800开始往后2个字"]},{"curValue":"接料机_plc","keyValue":"接料机_plc","lasttime":"接料机_plc","valueList":["接料机_plc","splic_plc","接料机_plc"]},{"curValue":".仅表示分隔符，如3000.02表示 ， 实时的写plc的R区从起始地址3000开始往后2个字，写和读 的地址不能有交集","keyValue":".仅表示分隔符，如3000.02表示 ， 实时的写plc的R区从起始地址3000开始往后2个字，写和读 的地址不能有交集","lasttime":".仅表示分隔符，如3000.02表示 ， 实时的写plc的R区从起始地址3000开始往后2个字，写和读 的地址不能有交集","valueList":[".仅表示分隔符，如3000.02表示 ， 实时的写plc的R区从起始地址3000开始往后2个字，写和读 的地址不能有交集","separator,3000.02 means current writting PLC from R zone, a address start from 3000,after 2character,the address of write and read can't intersection ",".仅表示分隔符，如3000.02表示 ， 实时的写plc的R区从起始地址3000开始往后2个字，写和读 的地址不能有交集"]},{"curValue":".仅表示分隔符，如5056.10表示 ， 实时的读plc的D区从起始地址5056开始往后10个字","keyValue":".仅表示分隔符，如5056.10表示 ， 实时的读plc的D区从起始地址5056开始往后10个字","lasttime":".仅表示分隔符，如5056.10表示 ， 实时的读plc的D区从起始地址5056开始往后10个字","valueList":[".仅表示分隔符，如5056.10表示 ， 实时的读plc的D区从起始地址5056开始往后10个字","separator ,5056.10means current PLC from D zone,a address start from 5056,after 10 character",".仅表示分隔符，如5056.10表示 ， 实时的读plc的D区从起始地址5056开始往后10个字"]},{"curValue":"例如RR2800.01 ,WR3000.01,RD3500.03 表示 再读2800往后一个字 写3000往后1个字，读D区3500往后3个字 逗号为分隔符 ","keyValue":"例如RR2800.01 ,WR3000.01,RD3500.03 表示 再读2800往后一个字 写3000往后1个字，读D区3500往后3个字 逗号为分隔符 ","lasttime":"例如RR2800.01 ,WR3000.01,RD3500.03 表示 再读2800往后一个字 写3000往后1个字，读D区3500往后3个字 逗号为分隔符 ","valueList":["例如RR2800.01 ,WR3000.01,RD3500.03 表示 再读2800往后一个字 写3000往后1个字，读D区3500往后3个字 逗号为分隔符 ","for example RR2800.01,WR3000.01,RD3500.03 means read one character after 2800,write one more character,read D area,after 3character from 3500,comma is separator","例如RR2800.01 ,WR3000.01,RD3500.03 表示 再读2800往后一个字 写3000往后1个字，读D区3500往后3个字 逗号为分隔符 "]},{"curValue":"扩展读写地址","keyValue":"扩展读写地址","lasttime":"扩展读写地址","valueList":["扩展读写地址","extend reading & writting address","扩展读写地址"]},{"curValue":"控制io状态显示时的格式， 如：R%F0：F0表示不显示小数点(如三菱plcM区)，F2表示显示两个小数点(一般欧姆龙plcR区)，DX表示前面是10进制最后一位是16进制（如松下PLC的R区）","keyValue":"控制io状态显示时的格式， 如：R%F0：F0表示不显示小数点(如三菱plcM区)，F2表示显示两个小数点(一般欧姆龙plcR区)，DX表示前面是10进制最后一位是16进制（如松下PLC的R区）","lasttime":"控制io状态显示时的格式， 如：R%F0：F0表示不显示小数点(如三菱plcM区)，F2表示显示两个小数点(一般欧姆龙plcR区)，DX表示前面是10进制最后一位是16进制（如松下PLC的R区）","valueList":["控制io状态显示时的格式， 如：R%F0：F0表示不显示小数点(如三菱plcM区)，F2表示显示两个小数点(一般欧姆龙plcR区)，DX表示前面是10进制最后一位是16进制（如松下PLC的R区）","IO display format,R%FO:FO means no display decimal point ( Mitsubishi PLC M zone),F2 means two decimal point (OmronPLcR","控制io状态显示时的格式， 如：R%F0：F0表示不显示小数点(如三菱plcM区)，F2表示显示两个小数点(一般欧姆龙plcR区)，DX表示前面是10进制最后一位是16进制（如松下PLC的R区）"]},{"curValue":"Bit显示格式_%F0_%F2_%DX","keyValue":"Bit显示格式_%F0_%F2_%DX","lasttime":"Bit显示格式_%F0_%F2_%DX","valueList":["Bit显示格式_%F0_%F2_%DX","bit display form _%FO_%F2_%DX","Bit显示格式_%F0_%F2_%DX"]},{"curValue":"设置串口的名称 命名方式为大写 COM + 整数, 如 COM1 、COM2、COM3等 ","keyValue":"设置串口的名称 命名方式为大写 COM + 整数, 如 COM1 、COM2、COM3等 ","lasttime":"设置串口的名称 命名方式为大写 COM + 整数, 如 COM1 、COM2、COM3等 ","valueList":["设置串口的名称 命名方式为大写 COM + 整数, 如 COM1 、COM2、COM3等 ","the name of com ,the way of name :COM+integer ,for example COM1,COM2,COM3 etc...","设置串口的名称 命名方式为大写 COM + 整数, 如 COM1 、COM2、COM3等 "]},{"curValue":"端口号","keyValue":"端口号","lasttime":"端口号","valueList":["端口号","port No.","端口号"]},{"curValue":"设置串口的波特率,一般备选项是：1200,2400,4800,9600,19200,38400,57600,115200","keyValue":"设置串口的波特率,一般备选项是：1200,2400,4800,9600,19200,38400,57600,115200","lasttime":"设置串口的波特率,一般备选项是：1200,2400,4800,9600,19200,38400,57600,115200","valueList":["设置串口的波特率,一般备选项是：1200,2400,4800,9600,19200,38400,57600,115200","Baud rate of com,common optial:1200,2400,4800,9600,19200,38400,57600,115200","设置串口的波特率,一般备选项是：1200,2400,4800,9600,19200,38400,57600,115200"]},{"curValue":"波特率","keyValue":"波特率","lasttime":"波特率","valueList":["波特率","Baud rate","波特率"]},{"curValue":"设置串口的数据位一般为：5,6,7,8","keyValue":"设置串口的数据位一般为：5,6,7,8","lasttime":"设置串口的数据位一般为：5,6,7,8","valueList":["设置串口的数据位一般为：5,6,7,8","com bits :5,6,7,8","设置串口的数据位一般为：5,6,7,8"]},{"curValue":"数据位","keyValue":"数据位","lasttime":"数据位","valueList":["数据位","date bits","数据位"]},{"curValue":"设置串口的校验位 E:偶校验 O:奇校验（是大写字母O，不是数字0），N：无校验","keyValue":"设置串口的校验位 E:偶校验 O:奇校验（是大写字母O，不是数字0），N：无校验","lasttime":"设置串口的校验位 E:偶校验 O:奇校验（是大写字母O，不是数字0），N：无校验","valueList":["设置串口的校验位 E:偶校验 O:奇校验（是大写字母O，不是数字0），N：无校验","check bit:E even parity check 0:odd parity check","设置串口的校验位 E:偶校验 O:奇校验（是大写字母O，不是数字0），N：无校验"]},{"curValue":"校验位","keyValue":"校验位","lasttime":"校验位","valueList":["校验位","check bit","校验位"]},{"curValue":"设置串口的停止位 一般 1, 1.5, 2","keyValue":"设置串口的停止位 一般 1, 1.5, 2","lasttime":"设置串口的停止位 一般 1, 1.5, 2","valueList":["设置串口的停止位 一般 1, 1.5, 2","stop bit of com ,nomal :1,5,2","设置串口的停止位 一般 1, 1.5, 2"]},{"curValue":"停止位","keyValue":"停止位","lasttime":"停止位","valueList":["停止位","stop bit","停止位"]},{"curValue":"控制 扫码枪扫码时，向扫码枪发送的控制指令","keyValue":"控制 扫码枪扫码时，向扫码枪发送的控制指令","lasttime":"控制 扫码枪扫码时，向扫码枪发送的控制指令","valueList":["控制 扫码枪扫码时，向扫码枪发送的控制指令","send command to scanner while its scanning","控制 扫码枪扫码时，向扫码枪发送的控制指令"]},{"curValue":"扫码枪1","keyValue":"扫码枪1","lasttime":"扫码枪1","valueList":["扫码枪1","scanner1","扫码枪1"]},{"curValue":"读取条码指令","keyValue":"读取条码指令","lasttime":"读取条码指令","valueList":["读取条码指令","command to read code","读取条码指令"]},{"curValue":"控制 扫码枪停止扫码时，向扫码枪发送的控制指令","keyValue":"控制 扫码枪停止扫码时，向扫码枪发送的控制指令","lasttime":"控制 扫码枪停止扫码时，向扫码枪发送的控制指令","valueList":["控制 扫码枪停止扫码时，向扫码枪发送的控制指令","send command to scanner while its stopped","控制 扫码枪停止扫码时，向扫码枪发送的控制指令"]},{"curValue":"停止读取条码指令","keyValue":"停止读取条码指令","lasttime":"停止读取条码指令","valueList":["停止读取条码指令","command to stop scanner","停止读取条码指令"]},{"curValue":"plc IO 点 一般为R区或M区等,如 松下plc R69F 则写成 69.15 欧姆龙的2800.00 写成2800.00不变 三菱M7500 写成7500","keyValue":"plc IO 点 一般为R区或M区等,如 松下plc R69F 则写成 69.15 欧姆龙的2800.00 写成2800.00不变 三菱M7500 写成7500","lasttime":"plc IO 点 一般为R区或M区等,如 松下plc R69F 则写成 69.15 欧姆龙的2800.00 写成2800.00不变 三菱M7500 写成7500","valueList":["plc IO 点 一般为R区或M区等,如 松下plc R69F 则写成 69.15 欧姆龙的2800.00 写成2800.00不变 三菱M7500 写成7500","PLC IO point, normal for R zone or M zone, Panasonic PLC write to as 69.15,Omron 2800 write to as 2800,Mitsubishi write to as 7500","plc IO 点 一般为R区或M区等,如 松下plc R69F 则写成 69.15 欧姆龙的2800.00 写成2800.00不变 三菱M7500 写成7500"]},{"curValue":"屏蔽按钮","keyValue":"屏蔽按钮","lasttime":"屏蔽按钮","valueList":["屏蔽按钮","diable button","屏蔽按钮"]},{"curValue":"间距按钮","keyValue":"间距按钮","lasttime":"间距按钮","valueList":["间距按钮","interval button","间距按钮"]},{"curValue":"条码按钮","keyValue":"条码按钮","lasttime":"条码按钮","valueList":["条码按钮","code button","条码按钮"]},{"curValue":"复位按钮","keyValue":"复位按钮","lasttime":"复位按钮","valueList":["复位按钮","reset button","复位按钮"]},{"curValue":"扫描第一个","keyValue":"扫描第一个","lasttime":"扫描第一个","valueList":["扫描第一个","scann to the first one","扫描第一个"]},{"curValue":"扫描对比NG","keyValue":"扫描对比NG","lasttime":"扫描对比NG","valueList":["扫描对比NG","scan contrast NG","扫描对比NG"]},{"curValue":"扫描对比OK","keyValue":"扫描对比OK","lasttime":"扫描对比OK","valueList":["扫描对比OK","scan contrast ok","扫描对比OK"]},{"curValue":"左边光纤写入完成","keyValue":"左边光纤写入完成","lasttime":"左边光纤写入完成","valueList":["左边光纤写入完成","left optical writting finished","左边光纤写入完成"]},{"curValue":"右边光纤写入完成","keyValue":"右边光纤写入完成","lasttime":"右边光纤写入完成","valueList":["右边光纤写入完成","right optical writting finished","右边光纤写入完成"]},{"curValue":"屏蔽指示灯","keyValue":"屏蔽指示灯","lasttime":"屏蔽指示灯","valueList":["屏蔽指示灯","disable indicating light","屏蔽指示灯"]},{"curValue":"间距指示灯","keyValue":"间距指示灯","lasttime":"间距指示灯","valueList":["间距指示灯","interval indicating light","间距指示灯"]},{"curValue":"条码指示灯","keyValue":"条码指示灯","lasttime":"条码指示灯","valueList":["条码指示灯","code indicating light","条码指示灯"]},{"curValue":"复位指示灯","keyValue":"复位指示灯","lasttime":"复位指示灯","valueList":["复位指示灯","reset indicating light","复位指示灯"]},{"curValue":"条码按钮设置无权限指示灯","keyValue":"条码按钮设置无权限指示灯","lasttime":"条码按钮设置无权限指示灯","valueList":["条码按钮设置无权限指示灯","indicating light of controlling code button","条码按钮设置无权限指示灯"]},{"curValue":"屏蔽按钮设置无权限指示灯","keyValue":"屏蔽按钮设置无权限指示灯","lasttime":"屏蔽按钮设置无权限指示灯","valueList":["屏蔽按钮设置无权限指示灯","indicationg light of controlling block button","屏蔽按钮设置无权限指示灯"]},{"curValue":"左启动","keyValue":"左启动","lasttime":"左启动","valueList":["左启动","left start button","左启动"]},{"curValue":"左空料停","keyValue":"左空料停","lasttime":"左空料停","valueList":["左空料停","left stop button of null checking","左空料停"]},{"curValue":"右启动","keyValue":"右启动","lasttime":"右启动","valueList":["右启动","right start button","右启动"]},{"curValue":"右空料停","keyValue":"右空料停","lasttime":"右空料停","valueList":["右空料停","right stop button of null checking ","右空料停"]},{"curValue":"扫码状态清空","keyValue":"扫码状态清空","lasttime":"扫码状态清空","valueList":["扫码状态清空","clear code","扫码状态清空"]},{"curValue":"接料完成条码清空","keyValue":"接料完成条码清空","lasttime":"接料完成条码清空","valueList":["接料完成条码清空","spalicing finished, code clear","接料完成条码清空"]},{"curValue":"条码超时","keyValue":"条码超时","lasttime":"条码超时","valueList":["条码超时","code is time-out","条码超时"]},{"curValue":"有报警","keyValue":"有报警","lasttime":"有报警","valueList":["有报警","alarm","有报警"]},{"curValue":"_条码按钮无效","keyValue":"_条码按钮无效","lasttime":"_条码按钮无效","valueList":["_条码按钮无效","code button invalid","_条码按钮无效"]},{"curValue":"_屏蔽按钮无效","keyValue":"_屏蔽按钮无效","lasttime":"_屏蔽按钮无效","valueList":["_屏蔽按钮无效","block button invalid","_屏蔽按钮无效"]},{"curValue":"_左边不检测空料","keyValue":"_左边不检测空料","lasttime":"_左边不检测空料","valueList":["_左边不检测空料","left side null checking disable","_左边不检测空料"]},{"curValue":"_右边不检测空料","keyValue":"_右边不检测空料","lasttime":"_右边不检测空料","valueList":["_右边不检测空料","right side null checking disable ","_右边不检测空料"]},{"curValue":"_左右全部不检测空料","keyValue":"_左右全部不检测空料","lasttime":"_左右全部不检测空料","valueList":["_左右全部不检测空料","null checking disable both side","_左右全部不检测空料"]},{"curValue":"_不需要扫码","keyValue":"_不需要扫码","lasttime":"_不需要扫码","valueList":["_不需要扫码","scanning disable","_不需要扫码"]},{"curValue":"_不使用光纤模块","keyValue":"_不使用光纤模块","lasttime":"_不使用光纤模块","valueList":["_不使用光纤模块","optical disable","_不使用光纤模块"]},{"curValue":"_先放料带在扫码","keyValue":"_先放料带在扫码","lasttime":"_先放料带在扫码","valueList":["_先放料带在扫码","film first ,scan the code","_先放料带在扫码"]},{"curValue":"_试用期接料次数限制","keyValue":"_试用期接料次数限制","lasttime":"_试用期接料次数限制","valueList":["_试用期接料次数限制","limited times of the trial","_试用期接料次数限制"]},{"curValue":"_是否屏蔽用一组参数","keyValue":"_是否屏蔽用一组参数","lasttime":"_是否屏蔽用一组参数","valueList":["_是否屏蔽用一组参数","disable one set para option","_是否屏蔽用一组参数"]},{"curValue":"_凸轮异常","keyValue":"_凸轮异常","lasttime":"_凸轮异常","valueList":["_凸轮异常","cam abnormal","_凸轮异常"]},{"curValue":"拨料横移异常","keyValue":"拨料横移异常","lasttime":"拨料横移异常","valueList":["拨料横移异常","peeling side-sliding abnormal","拨料横移异常"]},{"curValue":"拨胶膜异常","keyValue":"拨胶膜异常","lasttime":"拨胶膜异常","valueList":["拨胶膜异常","peeling abnormal","拨胶膜异常"]},{"curValue":"吸料横移异常","keyValue":"吸料横移异常","lasttime":"吸料横移异常","valueList":["吸料横移异常","vacuum side-sliding abnormal","吸料横移异常"]},{"curValue":"_吸胶膜异常","keyValue":"_吸胶膜异常","lasttime":"_吸胶膜异常","valueList":["_吸胶膜异常","vacuum is abnormal ","_吸胶膜异常"]},{"curValue":"进料带超时","keyValue":"进料带超时","lasttime":"进料带超时","valueList":["进料带超时","feeding time-out","进料带超时"]},{"curValue":"_电池电量低","keyValue":"_电池电量低","lasttime":"_电池电量低","valueList":["_电池电量低","Low battery Volume","_电池电量低"]},{"curValue":"_试用次数满","keyValue":"_试用次数满","lasttime":"_试用次数满","valueList":["_试用次数满","trial times is out","_试用次数满"]},{"curValue":"左边开始工作","keyValue":"左边开始工作","lasttime":"左边开始工作","valueList":["左边开始工作","left start working","左边开始工作"]},{"curValue":"左料带入料中","keyValue":"左料带入料中","lasttime":"左料带入料中","valueList":["左料带入料中","left film feeding","左料带入料中"]},{"curValue":"左料头到位读取空料值","keyValue":"左料头到位读取空料值","lasttime":"左料头到位读取空料值","valueList":["左料头到位读取空料值","null is checking by left sucker","左料头到位读取空料值"]},{"curValue":"左光纤设置完成找空料中","keyValue":"左光纤设置完成找空料中","lasttime":"左光纤设置完成找空料中","valueList":["左光纤设置完成找空料中","the left optical set is finished, null is checking","左光纤设置完成找空料中"]},{"curValue":"左空料找完准备去切刀位","keyValue":"左空料找完准备去切刀位","lasttime":"左空料找完准备去切刀位","valueList":["左空料找完准备去切刀位","left side null checking finished,move to cut point","左空料找完准备去切刀位"]},{"curValue":"左到切除位准备切除空料","keyValue":"左到切除位准备切除空料","lasttime":"左到切除位准备切除空料","valueList":["左到切除位准备切除空料","left cutter is ready for cutting null","左到切除位准备切除空料"]},{"curValue":"左去对接位贴膜包胶","keyValue":"左去对接位贴膜包胶","lasttime":"左去对接位贴膜包胶","valueList":["左去对接位贴膜包胶","left side move to joint pos ","左去对接位贴膜包胶"]},{"curValue":"左等待贴膜包胶","keyValue":"左等待贴膜包胶","lasttime":"左等待贴膜包胶","valueList":["左等待贴膜包胶","sticking and wrapping is ready for left side","左等待贴膜包胶"]},{"curValue":"右边开始工作","keyValue":"右边开始工作","lasttime":"右边开始工作","valueList":["右边开始工作","right side start to work","右边开始工作"]},{"curValue":"右料带入料中","keyValue":"右料带入料中","lasttime":"右料带入料中","valueList":["右料带入料中","right film is feeding","右料带入料中"]},{"curValue":"右料头到位读取空料值","keyValue":"右料头到位读取空料值","lasttime":"右料头到位读取空料值","valueList":["右料头到位读取空料值","right sucker is ready for null checkin","右料头到位读取空料值"]},{"curValue":"右光纤设置完成找空料中","keyValue":"右光纤设置完成找空料中","lasttime":"右光纤设置完成找空料中","valueList":["右光纤设置完成找空料中","right optical set is finished,null is checking","右光纤设置完成找空料中"]},{"curValue":"右空料找完准备去切刀位","keyValue":"右空料找完准备去切刀位","lasttime":"右空料找完准备去切刀位","valueList":["右空料找完准备去切刀位","null checking is completed ,move to cutting ","右空料找完准备去切刀位"]},{"curValue":"右到切除位准备切除空料","keyValue":"右到切除位准备切除空料","lasttime":"右到切除位准备切除空料","valueList":["右到切除位准备切除空料","to right cutting ","右到切除位准备切除空料"]},{"curValue":"右去对接位贴膜包胶","keyValue":"右去对接位贴膜包胶","lasttime":"右去对接位贴膜包胶","valueList":["右去对接位贴膜包胶","right side move to joint pos","右去对接位贴膜包胶"]},{"curValue":"右等待贴膜包胶","keyValue":"右等待贴膜包胶","lasttime":"右等待贴膜包胶","valueList":["右等待贴膜包胶"," waitting for sticking and wrapping for right side","右等待贴膜包胶"]},{"curValue":"料膜拨出中","keyValue":"料膜拨出中","lasttime":"料膜拨出中","valueList":["料膜拨出中","the film is moving out","料膜拨出中"]},{"curValue":"料膜到位准备吸膜","keyValue":"料膜到位准备吸膜","lasttime":"料膜到位准备吸膜","valueList":["料膜到位准备吸膜","film is ready for Vacuuming ","料膜到位准备吸膜"]},{"curValue":"拨到退回吸膜中","keyValue":"拨到退回吸膜中","lasttime":"拨到退回吸膜中","valueList":["拨到退回吸膜中","return to vaccum","拨到退回吸膜中"]},{"curValue":"吸膜后等待贴膜","keyValue":"吸膜后等待贴膜","lasttime":"吸膜后等待贴膜","valueList":["吸膜后等待贴膜","to sticking ","吸膜后等待贴膜"]},{"curValue":"正在贴膜包胶","keyValue":"正在贴膜包胶","lasttime":"正在贴膜包胶","valueList":["正在贴膜包胶","sticking and wrapping is in process","正在贴膜包胶"]},{"curValue":"包胶完成等待取走料带","keyValue":"包胶完成等待取走料带","lasttime":"包胶完成等待取走料带","valueList":["包胶完成等待取走料带","waitting for taking out the tape ","包胶完成等待取走料带"]},{"curValue":"料带去走本次工作完成","keyValue":"料带去走本次工作完成","lasttime":"料带去走本次工作完成","valueList":["料带去走本次工作完成","taking out the film","料带去走本次工作完成"]},{"curValue":"机器接料中","keyValue":"机器接料中","lasttime":"机器接料中","valueList":["机器接料中","spicing","机器接料中"]},{"curValue":"光纤参数设置","keyValue":"光纤参数设置","lasttime":"光纤参数设置","valueList":["光纤参数设置","optical para","光纤参数设置"]},{"curValue":"左切料阈值设置0105一阈值","keyValue":"左切料阈值设置0105一阈值","lasttime":"左切料阈值设置0105一阈值","valueList":["左切料阈值设置0105一阈值","set param of left threshold 0105-threshold","左切料阈值设置0105一阈值"]},{"curValue":"左判断料带种类阈值设置上限0105一阈值","keyValue":"左判断料带种类阈值设置上限0105一阈值","lasttime":"左判断料带种类阈值设置上限0105一阈值","valueList":["左判断料带种类阈值设置上限0105一阈值","set para for distingishing the tape,the upper para of threshold for left side 0105-threshold","左判断料带种类阈值设置上限0105一阈值"]},{"curValue":"左判断料带种类阈值设置下限0105一阈值","keyValue":"左判断料带种类阈值设置下限0105一阈值","lasttime":"左判断料带种类阈值设置下限0105一阈值","valueList":["左判断料带种类阈值设置下限0105一阈值","set para for distingishing the tape,the lower para of threshold for lefe side 0105-threshold","左判断料带种类阈值设置下限0105一阈值"]},{"curValue":"右切料阈值设置0105一阈值","keyValue":"右切料阈值设置0105一阈值","lasttime":"右切料阈值设置0105一阈值","valueList":["右切料阈值设置0105一阈值","set para for right cutter 0105-threshold","右切料阈值设置0105一阈值"]},{"curValue":"右判断料带种类阈值设置上限0105一阈值","keyValue":"右判断料带种类阈值设置上限0105一阈值","lasttime":"右判断料带种类阈值设置上限0105一阈值","valueList":["右判断料带种类阈值设置上限0105一阈值","set para for distingishing the tape,the upper para of threshold 0105-threshold","右判断料带种类阈值设置上限0105一阈值"]},{"curValue":"右判断料带种类阈值设置下限0105一阈值","keyValue":"右判断料带种类阈值设置下限0105一阈值","lasttime":"右判断料带种类阈值设置下限0105一阈值","valueList":["右判断料带种类阈值设置下限0105一阈值","set para for distingishing the tape,the lower para of threshold for right side 0105-threshold","右判断料带种类阈值设置下限0105一阈值"]},{"curValue":"左切料阈值设置0105二阈值","keyValue":"左切料阈值设置0105二阈值","lasttime":"左切料阈值设置0105二阈值","valueList":["左切料阈值设置0105二阈值","set para for left cutter 0105 the sec threshold","左切料阈值设置0105二阈值"]},{"curValue":"左判断料带种类阈值设置上限0105二阈值","keyValue":"左判断料带种类阈值设置上限0105二阈值","lasttime":"左判断料带种类阈值设置上限0105二阈值","valueList":["左判断料带种类阈值设置上限0105二阈值","set para for distingishing the tape,the upper para of threshold for right side,the sec threshold","左判断料带种类阈值设置上限0105二阈值"]},{"curValue":"左判断料带种类阈值设置下限0105二阈值","keyValue":"左判断料带种类阈值设置下限0105二阈值","lasttime":"左判断料带种类阈值设置下限0105二阈值","valueList":["左判断料带种类阈值设置下限0105二阈值","set para for distingishing the tape,the lower para of threshold for left side,the sec threshold","左判断料带种类阈值设置下限0105二阈值"]},{"curValue":"右切料阈值设置0105二阈值","keyValue":"右切料阈值设置0105二阈值","lasttime":"右切料阈值设置0105二阈值","valueList":["右切料阈值设置0105二阈值","set para for right cutter 0105, the sec threshold","右切料阈值设置0105二阈值"]},{"curValue":"右判断料带种类阈值设置上限0105二阈值","keyValue":"右判断料带种类阈值设置上限0105二阈值","lasttime":"右判断料带种类阈值设置上限0105二阈值","valueList":["右判断料带种类阈值设置上限0105二阈值","set para for distingishing tape, the upper parameter of shreshold 0105 the sec threshold","右判断料带种类阈值设置上限0105二阈值"]},{"curValue":"右判断料带种类阈值设置下限0105二阈值","keyValue":"右判断料带种类阈值设置下限0105二阈值","lasttime":"右判断料带种类阈值设置下限0105二阈值","valueList":["右判断料带种类阈值设置下限0105二阈值","set para for distingishing tape,the upper parameter of shreshold 0105 two threshold","右判断料带种类阈值设置下限0105二阈值"]},{"curValue":"左切料阈值设置0105三阈值","keyValue":"左切料阈值设置0105三阈值","lasttime":"左切料阈值设置0105三阈值","valueList":["左切料阈值设置0105三阈值","set para for left cutter 0105 three threshold","左切料阈值设置0105三阈值"]},{"curValue":"左判断料带种类阈值设置上限0105三阈值","keyValue":"左判断料带种类阈值设置上限0105三阈值","lasttime":"左判断料带种类阈值设置上限0105三阈值","valueList":["左判断料带种类阈值设置上限0105三阈值","set para for distingishing tape, the upper parameter for left side 0105 the third threshold","左判断料带种类阈值设置上限0105三阈值"]},{"curValue":"左判断料带种类阈值设置下限0105三阈值","keyValue":"左判断料带种类阈值设置下限0105三阈值","lasttime":"左判断料带种类阈值设置下限0105三阈值","valueList":["左判断料带种类阈值设置下限0105三阈值","set para for distingishing tape,the lower parameter for left side 0105 the third threshold","左判断料带种类阈值设置下限0105三阈值"]},{"curValue":"右切料阈值设置0105三阈值","keyValue":"右切料阈值设置0105三阈值","lasttime":"右切料阈值设置0105三阈值","valueList":["右切料阈值设置0105三阈值","set para for right cutter 0105 the third threshold","右切料阈值设置0105三阈值"]},{"curValue":"右判断料带种类阈值设置上限0105三阈值","keyValue":"右判断料带种类阈值设置上限0105三阈值","lasttime":"右判断料带种类阈值设置上限0105三阈值","valueList":["右判断料带种类阈值设置上限0105三阈值","set para for distingishing tape,the upper parameter 0105,the third threshold","右判断料带种类阈值设置上限0105三阈值"]},{"curValue":"右判断料带种类阈值设置下限0105三阈值","keyValue":"右判断料带种类阈值设置下限0105三阈值","lasttime":"右判断料带种类阈值设置下限0105三阈值","valueList":["右判断料带种类阈值设置下限0105三阈值","set para for distingishing tape,the lower parameter 0105 the third threshold","右判断料带种类阈值设置下限0105三阈值"]},{"curValue":"左切料阈值设置0201阈值","keyValue":"左切料阈值设置0201阈值","lasttime":"左切料阈值设置0201阈值","valueList":["左切料阈值设置0201阈值","set para for cutter 0201 threshold","左切料阈值设置0201阈值"]},{"curValue":"左判断料带种类阈值设置上限0201阈值","keyValue":"左判断料带种类阈值设置上限0201阈值","lasttime":"左判断料带种类阈值设置上限0201阈值","valueList":["左判断料带种类阈值设置上限0201阈值","setting para for distingishing the tape, the upper para0201","左判断料带种类阈值设置上限0201阈值"]},{"curValue":"左判断料带种类阈值设置下限0201阈值","keyValue":"左判断料带种类阈值设置下限0201阈值","lasttime":"左判断料带种类阈值设置下限0201阈值","valueList":["左判断料带种类阈值设置下限0201阈值","set para for distingishing the tape, the lower para 0201","左判断料带种类阈值设置下限0201阈值"]},{"curValue":"右切料阈值设置0201阈值","keyValue":"右切料阈值设置0201阈值","lasttime":"右切料阈值设置0201阈值","valueList":["右切料阈值设置0201阈值","set para for right cutter","右切料阈值设置0201阈值"]},{"curValue":"右判断料带种类阈值设置上限0201阈值","keyValue":"右判断料带种类阈值设置上限0201阈值","lasttime":"右判断料带种类阈值设置上限0201阈值","valueList":["右判断料带种类阈值设置上限0201阈值","sett para for distingishing the tape ,the upper para 0201for right side","右判断料带种类阈值设置上限0201阈值"]},{"curValue":"右判断料带种类阈值设置下限0201阈值","keyValue":"右判断料带种类阈值设置下限0201阈值","lasttime":"右判断料带种类阈值设置下限0201阈值","valueList":["右判断料带种类阈值设置下限0201阈值","set para for distingishing the tape,the lower para 0201 for right side","右判断料带种类阈值设置下限0201阈值"]},{"curValue":"左切料阈值设置0402阈值","keyValue":"左切料阈值设置0402阈值","lasttime":"左切料阈值设置0402阈值","valueList":["左切料阈值设置0402阈值","set para for left cutter 0402","左切料阈值设置0402阈值"]},{"curValue":"左判断料带种类阈值设置上限0402阈值","keyValue":"左判断料带种类阈值设置上限0402阈值","lasttime":"左判断料带种类阈值设置上限0402阈值","valueList":["左判断料带种类阈值设置上限0402阈值","set para for distingishing the tape,the upper para 0402","左判断料带种类阈值设置上限0402阈值"]},{"curValue":"左判断料带种类阈值设置下限0402阈值","keyValue":"左判断料带种类阈值设置下限0402阈值","lasttime":"左判断料带种类阈值设置下限0402阈值","valueList":["左判断料带种类阈值设置下限0402阈值","set para for distingishing the tape, the lower para 0402","左判断料带种类阈值设置下限0402阈值"]},{"curValue":"右切料阈值设置0402阈值","keyValue":"右切料阈值设置0402阈值","lasttime":"右切料阈值设置0402阈值","valueList":["右切料阈值设置0402阈值","set para for right cutter 0402","右切料阈值设置0402阈值"]},{"curValue":"右判断料带种类阈值设置上限0402阈值","keyValue":"右判断料带种类阈值设置上限0402阈值","lasttime":"右判断料带种类阈值设置上限0402阈值","valueList":["右判断料带种类阈值设置上限0402阈值","set para for distingishing the tape ,the upper para 0402","右判断料带种类阈值设置上限0402阈值"]},{"curValue":"右判断料带种类阈值设置下限0402阈值","keyValue":"右判断料带种类阈值设置下限0402阈值","lasttime":"右判断料带种类阈值设置下限0402阈值","valueList":["右判断料带种类阈值设置下限0402阈值","set para for distingishing the tape, the lower para 0402","右判断料带种类阈值设置下限0402阈值"]},{"curValue":"左切料阈值设置0603阈值","keyValue":"左切料阈值设置0603阈值","lasttime":"左切料阈值设置0603阈值","valueList":["左切料阈值设置0603阈值","set para for left cutter 0603","左切料阈值设置0603阈值"]},{"curValue":"左判断料带种类阈值设置上限0603阈值","keyValue":"左判断料带种类阈值设置上限0603阈值","lasttime":"左判断料带种类阈值设置上限0603阈值","valueList":["左判断料带种类阈值设置上限0603阈值","set para for distingishing the tape,the upper para for left side","左判断料带种类阈值设置上限0603阈值"]},{"curValue":"左判断料带种类阈值设置下限0603阈值","keyValue":"左判断料带种类阈值设置下限0603阈值","lasttime":"左判断料带种类阈值设置下限0603阈值","valueList":["左判断料带种类阈值设置下限0603阈值","set para for distingishing the tape, the lower para of left side","左判断料带种类阈值设置下限0603阈值"]},{"curValue":"右切料阈值设置0603阈值","keyValue":"右切料阈值设置0603阈值","lasttime":"右切料阈值设置0603阈值","valueList":["右切料阈值设置0603阈值","set para of right cutter 0603","右切料阈值设置0603阈值"]},{"curValue":"右判断料带种类阈值设置上限0603阈值","keyValue":"右判断料带种类阈值设置上限0603阈值","lasttime":"右判断料带种类阈值设置上限0603阈值","valueList":["右判断料带种类阈值设置上限0603阈值","set para for distingishing the tape, the upper para 0603 for right side","右判断料带种类阈值设置上限0603阈值"]},{"curValue":"右判断料带种类阈值设置下限0603阈值","keyValue":"右判断料带种类阈值设置下限0603阈值","lasttime":"右判断料带种类阈值设置下限0603阈值","valueList":["右判断料带种类阈值设置下限0603阈值","set para for distingishing the tape, the lower para 0603 for right side","右判断料带种类阈值设置下限0603阈值"]},{"curValue":"左切料阈值设置0805阈值","keyValue":"左切料阈值设置0805阈值","lasttime":"左切料阈值设置0805阈值","valueList":["左切料阈值设置0805阈值","set para for left cutter 0805","左切料阈值设置0805阈值"]},{"curValue":"左判断料带种类阈值设置上限0805阈值","keyValue":"左判断料带种类阈值设置上限0805阈值","lasttime":"左判断料带种类阈值设置上限0805阈值","valueList":["左判断料带种类阈值设置上限0805阈值","set para for distingishing the tape, the upper para 0805 for left side","左判断料带种类阈值设置上限0805阈值"]},{"curValue":"左判断料带种类阈值设置下限0805阈值","keyValue":"左判断料带种类阈值设置下限0805阈值","lasttime":"左判断料带种类阈值设置下限0805阈值","valueList":["左判断料带种类阈值设置下限0805阈值","set para for distingishing the tape,the lower para 0805 for left side","左判断料带种类阈值设置下限0805阈值"]},{"curValue":"右切料阈值设置0805阈值","keyValue":"右切料阈值设置0805阈值","lasttime":"右切料阈值设置0805阈值","valueList":["右切料阈值设置0805阈值","set para for right cutter 0805 ","右切料阈值设置0805阈值"]},{"curValue":"右判断料带种类阈值设置上限0805阈值","keyValue":"右判断料带种类阈值设置上限0805阈值","lasttime":"右判断料带种类阈值设置上限0805阈值","valueList":["右判断料带种类阈值设置上限0805阈值","set para for distingishing the tape , the upper para for right side","右判断料带种类阈值设置上限0805阈值"]},{"curValue":"右判断料带种类阈值设置下限0805阈值","keyValue":"右判断料带种类阈值设置下限0805阈值","lasttime":"右判断料带种类阈值设置下限0805阈值","valueList":["右判断料带种类阈值设置下限0805阈值","set para for distingishing the tape, the lower para for right side","右判断料带种类阈值设置下限0805阈值"]},{"curValue":"剥料位置补偿","keyValue":"剥料位置补偿","lasttime":"剥料位置补偿","valueList":["剥料位置补偿","peel positon adjust","剥料位置补偿"]},{"curValue":"吸料位置补偿","keyValue":"吸料位置补偿","lasttime":"吸料位置补偿","valueList":["吸料位置补偿","vacuum position adjust","吸料位置补偿"]},{"curValue":"待吸位置","keyValue":"待吸位置","lasttime":"待吸位置","valueList":["待吸位置","to position for vacuum","待吸位置"]},{"curValue":"待贴位置","keyValue":"待贴位置","lasttime":"待贴位置","valueList":["待贴位置","to postion for sticking","待贴位置"]},{"curValue":"贴料位置补偿","keyValue":"贴料位置补偿","lasttime":"贴料位置补偿","valueList":["贴料位置补偿","sticking position adjust","贴料位置补偿"]},{"curValue":"条码比对时间（ms）","keyValue":"条码比对时间（ms）","lasttime":"条码比对时间（ms）","valueList":["条码比对时间（ms）","barcode comtrast times ms","条码比对时间（ms）"]},{"curValue":"空料查找速度","keyValue":"空料查找速度","lasttime":"空料查找速度","valueList":["空料查找速度","null search time","空料查找速度"]},{"curValue":"电池电压阈值","keyValue":"电池电压阈值","lasttime":"电池电压阈值","valueList":["电池电压阈值","battery split voltage","电池电压阈值"]},{"curValue":"找空料超时","keyValue":"找空料超时","lasttime":"找空料超时","valueList":["找空料超时","find null timeout","找空料超时"]},{"curValue":"保压时间","keyValue":"保压时间","lasttime":"保压时间","valueList":["保压时间","keekpresstime","保压时间"]},{"curValue":"胶膜预设","keyValue":"胶膜预设","lasttime":"胶膜预设","valueList":["胶膜预设","fill set","胶膜预设"]},{"curValue":"0~1之间","keyValue":"0~1之间","lasttime":"0~1之间","valueList":["0~1之间","0`1","0~1之间"]},{"curValue":"有料空料比例系数","keyValue":"有料空料比例系数","lasttime":"有料空料比例系数","valueList":["有料空料比例系数","full/null product scale","有料空料比例系数"]},{"curValue":"生产数量","keyValue":"生产数量","lasttime":"生产数量","valueList":["生产数量","total output","生产数量"]},{"curValue":"胶膜使用数量","keyValue":"胶膜使用数量","lasttime":"胶膜使用数量","valueList":["胶膜使用数量","film use qty","胶膜使用数量"]},{"curValue":"电机补偿设置","keyValue":"电机补偿设置","lasttime":"电机补偿设置","valueList":["电机补偿设置","motor compensation","电机补偿设置"]},{"curValue":"推料_左切刀位_2mm_屏蔽_补偿值","keyValue":"推料_左切刀位_2mm_屏蔽_补偿值","lasttime":"推料_左切刀位_2mm_屏蔽_补偿值","valueList":["推料_左切刀位_2mm_屏蔽_补偿值","pushing_left cutter position2mm_disable_adjust","推料_左切刀位_2mm_屏蔽_补偿值"]},{"curValue":"推料_左切刀位_4mm_屏蔽_补偿值","keyValue":"推料_左切刀位_4mm_屏蔽_补偿值","lasttime":"推料_左切刀位_4mm_屏蔽_补偿值","valueList":["推料_左切刀位_4mm_屏蔽_补偿值","pushing_left cutter position 4mm_disable_adjust","推料_左切刀位_4mm_屏蔽_补偿值"]},{"curValue":"推料_左切刀位__2mm_不屏蔽_补偿值","keyValue":"推料_左切刀位__2mm_不屏蔽_补偿值","lasttime":"推料_左切刀位__2mm_不屏蔽_补偿值","valueList":["推料_左切刀位__2mm_不屏蔽_补偿值","pushing_left cutter position 2mm_non block_adjust","推料_左切刀位__2mm_不屏蔽_补偿值"]},{"curValue":"推料_左切刀位__4mm_不屏蔽_补偿值","keyValue":"推料_左切刀位__4mm_不屏蔽_补偿值","lasttime":"推料_左切刀位__4mm_不屏蔽_补偿值","valueList":["推料_左切刀位__4mm_不屏蔽_补偿值","Pushing_left cutter position_4mm non block_adjust","推料_左切刀位__4mm_不屏蔽_补偿值"]},{"curValue":"推料_右切刀位_2mm_屏蔽_补偿值","keyValue":"推料_右切刀位_2mm_屏蔽_补偿值","lasttime":"推料_右切刀位_2mm_屏蔽_补偿值","valueList":["推料_右切刀位_2mm_屏蔽_补偿值","pushing_right cutter position_2mm_disable_adjust","推料_右切刀位_2mm_屏蔽_补偿值"]},{"curValue":"推料_右切刀位_4mm_屏蔽_补偿值","keyValue":"推料_右切刀位_4mm_屏蔽_补偿值","lasttime":"推料_右切刀位_4mm_屏蔽_补偿值","valueList":["推料_右切刀位_4mm_屏蔽_补偿值","pushing_right cutter Position_4mm disable _adjust","推料_右切刀位_4mm_屏蔽_补偿值"]},{"curValue":"推料_右切刀位__2mm_不屏蔽_补偿值","keyValue":"推料_右切刀位__2mm_不屏蔽_补偿值","lasttime":"推料_右切刀位__2mm_不屏蔽_补偿值","valueList":["推料_右切刀位__2mm_不屏蔽_补偿值","pushing_right cutter position_2mm non block_adjust","推料_右切刀位__2mm_不屏蔽_补偿值"]},{"curValue":"推料_右切刀位__4mm_不屏蔽_补偿值","keyValue":"推料_右切刀位__4mm_不屏蔽_补偿值","lasttime":"推料_右切刀位__4mm_不屏蔽_补偿值","valueList":["推料_右切刀位__4mm_不屏蔽_补偿值","Pushing_right cutter position _4mm_non block_adjust","推料_右切刀位__4mm_不屏蔽_补偿值"]},{"curValue":"推料_左对接位_2mm_屏蔽_补偿值","keyValue":"推料_左对接位_2mm_屏蔽_补偿值","lasttime":"推料_左对接位_2mm_屏蔽_补偿值","valueList":["推料_左对接位_2mm_屏蔽_补偿值","pushing_left connect position_4mm_disable_adjust","推料_左对接位_2mm_屏蔽_补偿值"]},{"curValue":"推料_左对接位_4mm_屏蔽_补偿值","keyValue":"推料_左对接位_4mm_屏蔽_补偿值","lasttime":"推料_左对接位_4mm_屏蔽_补偿值","valueList":["推料_左对接位_4mm_屏蔽_补偿值","pushing_left connect position _2mm_disable_adjust","推料_左对接位_4mm_屏蔽_补偿值"]},{"curValue":"推料_左对接位__2mm_不屏蔽_补偿值","keyValue":"推料_左对接位__2mm_不屏蔽_补偿值","lasttime":"推料_左对接位__2mm_不屏蔽_补偿值","valueList":["推料_左对接位__2mm_不屏蔽_补偿值","pushing_left connect position_2mm_non block_adjust","推料_左对接位__2mm_不屏蔽_补偿值"]},{"curValue":"推料_左对接位__4mm_不屏蔽_补偿值","keyValue":"推料_左对接位__4mm_不屏蔽_补偿值","lasttime":"推料_左对接位__4mm_不屏蔽_补偿值","valueList":["推料_左对接位__4mm_不屏蔽_补偿值","pushing_left connect position_4mm_non block _adjust","推料_左对接位__4mm_不屏蔽_补偿值"]},{"curValue":"推料_右对接位_2mm_屏蔽_补偿值","keyValue":"推料_右对接位_2mm_屏蔽_补偿值","lasttime":"推料_右对接位_2mm_屏蔽_补偿值","valueList":["推料_右对接位_2mm_屏蔽_补偿值","pushing_right connect postion_2mm_disable_adjust","推料_右对接位_2mm_屏蔽_补偿值"]},{"curValue":"推料_右对接位_4mm_屏蔽_补偿值","keyValue":"推料_右对接位_4mm_屏蔽_补偿值","lasttime":"推料_右对接位_4mm_屏蔽_补偿值","valueList":["推料_右对接位_4mm_屏蔽_补偿值","pushing_right connect position_4mm disble_adjust","推料_右对接位_4mm_屏蔽_补偿值"]},{"curValue":"推料_右对接位__2mm_不屏蔽_补偿值","keyValue":"推料_右对接位__2mm_不屏蔽_补偿值","lasttime":"推料_右对接位__2mm_不屏蔽_补偿值","valueList":["推料_右对接位__2mm_不屏蔽_补偿值","pushing_right connect position _2mm _non block_adjust","推料_右对接位__2mm_不屏蔽_补偿值"]},{"curValue":"推料_右对接位__4mm_不屏蔽_补偿值","keyValue":"推料_右对接位__4mm_不屏蔽_补偿值","lasttime":"推料_右对接位__4mm_不屏蔽_补偿值","valueList":["推料_右对接位__4mm_不屏蔽_补偿值","pushing_right connect position_4mm_non block_adjust","推料_右对接位__4mm_不屏蔽_补偿值"]},{"curValue":"空料检测时间毫秒","keyValue":"空料检测时间毫秒","lasttime":"空料检测时间毫秒","valueList":["空料检测时间毫秒","numm productChecktime","空料检测时间毫秒"]},{"curValue":"多国语言设置","keyValue":"多国语言设置","lasttime":"多国语言设置","valueList":["多国语言设置","multiLanguageSetting","多国语言设置"]},{"curValue":"默认文本","keyValue":"默认文本","lasttime":"默认文本","valueList":["默认文本","defaultText","默认文本"]},{"curValue":"时间","keyValue":"时间","lasttime":"时间","valueList":["时间","time","时间"]},{"curValue":"是否使用串口扫码枪","keyValue":"是否使用串口扫码枪","lasttime":"是否使用串口扫码枪","valueList":["是否使用串口扫码枪","enable com Scanner","是否使用串口扫码枪"]},{"curValue":"是否使用usb扫码枪","keyValue":"是否使用usb扫码枪","lasttime":"是否使用usb扫码枪","valueList":["是否使用usb扫码枪","enable usb Scanner","是否使用usb扫码枪"]},{"curValue":"接料机 v18.07.10","keyValue":"接料机 v18.07.10","lasttime":"接料机 v18.07.10","valueList":["接料机 v18.07.10","splic Machine v18.07.10","接料机 v18.07.10"]},{"curValue":"退出","keyValue":"退出","lasttime":"退出","valueList":["退出","exit","退出"]},{"curValue":"最小化","keyValue":"最小化","lasttime":"最小化","valueList":["最小化","minisize","最小化"]},{"curValue":"设备状态","keyValue":"设备状态","lasttime":"设备状态","valueList":["设备状态","machineState","设备状态"]},{"curValue":"等待第1次扫码","keyValue":"等待第1次扫码","lasttime":"等待第1次扫码","valueList":["等待第1次扫码","wait for Scann1","等待第1次扫码"]},{"curValue":"当前条码","keyValue":"当前条码","lasttime":"当前条码","valueList":["当前条码","current Code","当前条码"]},{"curValue":"旧条码：","keyValue":"旧条码：","lasttime":"旧条码：","valueList":["旧条码：","Old Code:","旧条码："]},{"curValue":"校验结果：","keyValue":"校验结果：","lasttime":"校验结果：","valueList":["校验结果：","CheckResult1","校验结果："]},{"curValue":"新条码：","keyValue":"新条码：","lasttime":"新条码：","valueList":["新条码：","new Code:","新条码："]},{"curValue":"接料完成：","keyValue":"接料完成：","lasttime":"接料完成：","valueList":["接料完成：","splic finished","接料完成："]},{"curValue":"PLC调试","keyValue":"PLC调试","lasttime":"PLC调试","valueList":["PLC调试","plc debug","PLC调试"]},{"curValue":"条码调试","keyValue":"条码调试","lasttime":"条码调试","valueList":["条码调试","scanner debug","条码调试"]},{"curValue":"清空条码","keyValue":"清空条码","lasttime":"清空条码","valueList":["清空条码","clear Code","清空条码"]},{"curValue":"等待扫码","keyValue":"等待扫码","lasttime":"等待扫码","valueList":["等待扫码","wait Scan","等待扫码"]},{"curValue":"用户登录","keyValue":"用户登录","lasttime":"用户登录","valueList":["用户登录","user login","用户登录"]},{"curValue":"注销登录","keyValue":"注销登录","lasttime":"注销登录","valueList":["注销登录","logout","注销登录"]},{"curValue":"请输入密码","keyValue":"请输入密码","lasttime":"请输入密码","valueList":["请输入密码","insert password","请输入密码"]},{"curValue":"输入","keyValue":"输入","lasttime":"输入","valueList":["输入","input","输入"]},{"curValue":"取消","keyValue":"取消","lasttime":"取消","valueList":["取消","canncel","取消"]},{"curValue":"删除","keyValue":"删除","lasttime":"删除","valueList":["删除","delete","删除"]},{"curValue":"清空","keyValue":"清空","lasttime":"清空","valueList":["清空","clear","清空"]},{"curValue":"拨料","keyValue":"拨料","lasttime":"拨料","valueList":["拨料","peel ","拨料"]},{"curValue":"拨一个料","keyValue":"拨一个料","lasttime":"拨一个料","valueList":["拨一个料","peel one","拨一个料"]},{"curValue":"IO监控","keyValue":"IO监控","lasttime":"IO监控","valueList":["IO监控","io monitor","IO监控"]},{"curValue":"自动","keyValue":"自动","lasttime":"自动","valueList":["自动","auto","自动"]},{"curValue":"保存参数","keyValue":"保存参数","lasttime":"保存参数","valueList":["保存参数","savePara","保存参数"]},{"curValue":"实时电池电压","keyValue":"实时电池电压","lasttime":"实时电池电压","valueList":["实时电池电压","cur volage","实时电池电压"]},{"curValue":"右对接位补偿","keyValue":"右对接位补偿","lasttime":"右对接位补偿","valueList":["右对接位补偿","right join adjust","右对接位补偿"]},{"curValue":"条码对比超时","keyValue":"条码对比超时","lasttime":"条码对比超时","valueList":["条码对比超时","code check timeOut","条码对比超时"]},{"curValue":"屏蔽","keyValue":"屏蔽","lasttime":"屏蔽","valueList":["屏蔽","disable","屏蔽"]},{"curValue":"查找空料超时","keyValue":"查找空料超时","lasttime":"查找空料超时","valueList":["查找空料超时","null checking is time out","查找空料超时"]},{"curValue":"不屏蔽","keyValue":"不屏蔽","lasttime":"不屏蔽","valueList":["不屏蔽","not disable","不屏蔽"]},{"curValue":"吸料横移","keyValue":"吸料横移","lasttime":"吸料横移","valueList":["吸料横移","absorbmove","吸料横移"]},{"curValue":"至贴料位","keyValue":"至贴料位","lasttime":"至贴料位","valueList":["至贴料位","topastepoint","至贴料位"]},{"curValue":"至吸料位","keyValue":"至吸料位","lasttime":"至吸料位","valueList":["至吸料位","ToAbsorb","至吸料位"]},{"curValue":"至待贴位置","keyValue":"至待贴位置","lasttime":"至待贴位置","valueList":["至待贴位置","to pasterPoint","至待贴位置"]},{"curValue":"至待吸位","keyValue":"至待吸位","lasttime":"至待吸位","valueList":["至待吸位","to waitabsorb","至待吸位"]},{"curValue":"回 原 点","keyValue":"回 原 点","lasttime":"回 原 点","valueList":["回 原 点","homing","回 原 点"]},{"curValue":"当前位置","keyValue":"当前位置","lasttime":"当前位置","valueList":["当前位置","cur pos","当前位置"]},{"curValue":"剥料横移","keyValue":"剥料横移","lasttime":"剥料横移","valueList":["剥料横移","peel move","剥料横移"]},{"curValue":"至吸取位","keyValue":"至吸取位","lasttime":"至吸取位","valueList":["至吸取位","to suckup point","至吸取位"]},{"curValue":"回 原 点","keyValue":"回 原 点","lasttime":"回 原 点","valueList":["回 原 点","Homing","回 原 点"]},{"curValue":"左切刀位补偿","keyValue":"左切刀位补偿","lasttime":"左切刀位补偿","valueList":["左切刀位补偿","left cuttingAdjust","左切刀位补偿"]},{"curValue":"左对接位补偿","keyValue":"左对接位补偿","lasttime":"左对接位补偿","valueList":["左对接位补偿","left joinadjust","左对接位补偿"]},{"curValue":"右切刀位补偿","keyValue":"右切刀位补偿","lasttime":"右切刀位补偿","valueList":["右切刀位补偿","rightcuttingadjust","右切刀位补偿"]},{"curValue":"凸轮","keyValue":"凸轮","lasttime":"凸轮","valueList":["凸轮","cam ","凸轮"]},{"curValue":"回\r\n原\r\n点","keyValue":"回\r\n原\r\n点","lasttime":"回\r\n原\r\n点","valueList":["回\r\n原\r\n点","to home","回\r\n原\r\n点"]},{"curValue":"至取料位","keyValue":"至取料位","lasttime":"至取料位","valueList":["至取料位","to pickpoint","至取料位"]},{"curValue":"至切刀位","keyValue":"至切刀位","lasttime":"至切刀位","valueList":["至切刀位","to cuttingpos","至切刀位"]},{"curValue":"真空","keyValue":"真空","lasttime":"真空","valueList":["真空","vacuum","真空"]},{"curValue":"真空泵","keyValue":"真空泵","lasttime":"真空泵","valueList":["真空泵","vacuum model","真空泵"]},{"curValue":".仅表示分隔符，如2800.02表示 ，plc的R区从起始地址2800开始往后2个字","keyValue":".仅表示分隔符，如2800.02表示 ，plc的R区从起始地址2800开始往后2个字","lasttime":".仅表示分隔符，如2800.02表示 ，plc的R区从起始地址2800开始往后2个字","valueList":[".仅表示分隔符，如2800.02表示 ，plc的R区从起始地址2800开始往后2个字","to be tr..",".仅表示分隔符，如2800.02表示 ，plc的R区从起始地址2800开始往后2个字"]},{"curValue":"请输入高级密码","keyValue":"请输入高级密码","lasttime":"请输入高级密码","valueList":["请输入高级密码","please input advanced password","请输入高级密码"]},{"curValue":"未打开","keyValue":"未打开","lasttime":"未打开","valueList":["未打开","not opening","未打开"]},{"curValue":"光纤通信模块","keyValue":"光纤通信模块","lasttime":"光纤通信模块","valueList":["光纤通信模块","optical firbe","光纤通信模块"]},{"curValue":"运行中","keyValue":"运行中","lasttime":"运行中","valueList":["运行中","isRunning","运行中"]},{"curValue":"连接成功","keyValue":"连接成功","lasttime":"连接成功","valueList":["连接成功","connect succes","连接成功"]},{"curValue":"接料机 v18.07.24","keyValue":"接料机 v18.07.24","lasttime":"接料机 v18.07.24","valueList":["接料机 v18.07.24","splic machine v18.07.24","接料机 v18.07.24"]},{"curValue":"保存完成","keyValue":"保存完成","lasttime":"保存完成","valueList":["保存完成","save finished","保存完成"]},{"curValue":"当前语言序号","keyValue":"当前语言序号","lasttime":"当前语言序号","valueList":["当前语言序号","curlanguageIndex","当前语言序号"]},{"curValue":"程序初始化开始！！！","keyValue":"程序初始化开始！！！","lasttime":"程序初始化开始！！！","valueList":["程序初始化开始！！！","applicatio init start","程序初始化开始！！！"]},{"curValue":"连接失败:(稍后重试)","keyValue":"连接失败:(稍后重试)","lasttime":"连接失败:(稍后重试)","valueList":["连接失败:(稍后重试)","connnect fail reconnect later","连接失败:(稍后重试)"]},{"curValue":"HjyeScan 线程开始","keyValue":"HjyeScan 线程开始","lasttime":"HjyeScan 线程开始","valueList":["HjyeScan 线程开始","hjyeScan Start","HjyeScan 线程开始"]},{"curValue":"程序初始化完成","keyValue":"程序初始化完成","lasttime":"程序初始化完成","valueList":["程序初始化完成","application finished","程序初始化完成"]},{"curValue":"保存参数成功","keyValue":"保存参数成功","lasttime":"保存参数成功","valueList":["保存参数成功","save Para success","保存参数成功"]},{"curValue":"请输入新的值","keyValue":"请输入新的值","lasttime":"请输入新的值","valueList":["请输入新的值","input new value","请输入新的值"]},{"curValue":"手动","keyValue":"手动","lasttime":"手动","valueList":["手动","manual","手动"]},{"curValue":"其他","keyValue":"其他","lasttime":"其他","valueList":["其他","other","其他"]},{"curValue":"串口号","keyValue":"串口号","lasttime":"串口号","valueList":["串口号","com No.","串口号"]},{"curValue":"光纤模块","keyValue":"光纤模块","lasttime":"光纤模块","valueList":["光纤模块","optical fiber","光纤模块"]},{"curValue":"检测通过，当前是第一个程序","keyValue":"检测通过，当前是第一个程序","lasttime":"检测通过，当前是第一个程序","valueList":["检测通过，当前是第一个程序","check ok this is first app","检测通过，当前是第一个程序"]},{"curValue":"高级设置","keyValue":"高级设置","lasttime":"高级设置","valueList":["高级设置","admin setting","高级设置"]},{"curValue":"语言设置","keyValue":"语言设置","lasttime":"语言设置","valueList":["语言设置","lang set","语言设置"]},{"curValue":"详细设置","keyValue":"详细设置","lasttime":"详细设置","valueList":["详细设置","detail set","详细设置"]},{"curValue":"生产数量=0","keyValue":"生产数量=0","lasttime":"生产数量=0","valueList":["生产数量=0","productNum=0","生产数量=0"]},{"curValue":"胶膜使用数量=0","keyValue":"胶膜使用数量=0","lasttime":"胶膜使用数量=0","valueList":["胶膜使用数量=0","tape user count=0","胶膜使用数量=0"]},{"curValue":"语言","keyValue":"语言","lasttime":"语言","valueList":["语言","language","语言"]},{"curValue":"条码1：","keyValue":"条码1：","lasttime":"条码1：","valueList":["条码1：","barCode1","条码1："]},{"curValue":"条码2：","keyValue":"条码2：","lasttime":"条码2：","valueList":["条码2：","barCode2","条码2："]},{"curValue":"当前用户:未登录","keyValue":"当前用户:未登录","lasttime":"当前用户:未登录","valueList":["当前用户:未登录","current User:","当前用户:未登录"]},{"curValue":"请输入用户名","keyValue":"请输入用户名","lasttime":"请输入用户名","valueList":["请输入用户名","pls input username","请输入用户名"]},{"curValue":"用户名不存在或密码错误","keyValue":"用户名不存在或密码错误","lasttime":"用户名不存在或密码错误","valueList":["用户名不存在或密码错误","user is not exist or pwd is error","用户名不存在或密码错误"]},{"curValue":"保存参数到plc","keyValue":"保存参数到plc","lasttime":"保存参数到plc","valueList":["保存参数到plc","saveParaToPlc","保存参数到plc"]},{"curValue":"从plc读取参数","keyValue":"从plc读取参数","lasttime":"从plc读取参数","valueList":["从plc读取参数","readParaFromPLC","从plc读取参数"]},{"curValue":"当前用户：op1用户等级=Operator","keyValue":"当前用户：op1用户等级=Operator","lasttime":"当前用户：op1用户等级=Operator","valueList":["当前用户：op1用户等级=Operator","curUser：op1level=Operator","当前用户：op1用户等级=Operator"]},{"curValue":"保存成功","keyValue":"保存成功","lasttime":"保存成功","valueList":["保存成功","save suceess","保存成功"]},{"curValue":"程序初始化开始","keyValue":"程序初始化开始","lasttime":"程序初始化开始","valueList":["程序初始化开始","app init start","程序初始化开始"]},{"curValue":"条码设置","keyValue":"条码设置","lasttime":"条码设置","valueList":["条码设置","barCode set","条码设置"]},{"curValue":"运行日志","keyValue":"运行日志","lasttime":"运行日志","valueList":["运行日志","run log","运行日志"]},{"curValue":"校验","keyValue":"校验","lasttime":"校验","valueList":["校验","check","校验"]},{"curValue":"起始位","keyValue":"起始位","lasttime":"起始位","valueList":["起始位","start bit","起始位"]},{"curValue":"校验长度","keyValue":"校验长度","lasttime":"校验长度","valueList":["校验长度","check length","校验长度"]},{"curValue":"参考条码","keyValue":"参考条码","lasttime":"参考条码","valueList":["参考条码","ref barCode","参考条码"]},{"curValue":"您即将","keyValue":"您即将","lasttime":"您即将","valueList":["您即将","you will","您即将"]},{"curValue":"，请确认？","keyValue":"，请确认？","lasttime":"，请确认？","valueList":["，请确认？","，pls confirm？","，请确认？"]},{"curValue":"提示","keyValue":"提示","lasttime":"提示","valueList":["提示","tips","提示"]},{"curValue":"退出系统","keyValue":"退出系统","lasttime":"退出系统","valueList":["退出系统","quit system","退出系统"]},{"curValue":"记住密码","keyValue":"记住密码","lasttime":"记住密码","valueList":["记住密码","remember password","记住密码"]},{"curValue":"记住用户名","keyValue":"记住用户名","lasttime":"记住用户名","valueList":["记住用户名","remember userName","记住用户名"]},{"curValue":"登录","keyValue":"登录","lasttime":"登录","valueList":["登录","logIn","登录"]},{"curValue":"密码","keyValue":"密码","lasttime":"密码","valueList":["密码","password","密码"]},{"curValue":"用户名","keyValue":"用户名","lasttime":"用户名","valueList":["用户名","userName","用户名"]},{"curValue":"名称","keyValue":"名称","lasttime":"名称","valueList":["名称","name","名称"]},{"curValue":"值","keyValue":"值","lasttime":"值","valueList":["值","value","值"]},{"curValue":"备注","keyValue":"备注","lasttime":"备注","valueList":["备注","remark","备注"]},{"curValue":"用户等级","keyValue":"用户等级","lasttime":"用户等级","valueList":["用户等级","user Level","用户等级"]},{"curValue":"是否变化","keyValue":"是否变化","lasttime":"是否变化","valueList":["是否变化","isChanged","是否变化"]},{"curValue":"是否启用","keyValue":"是否启用","lasttime":"是否启用","valueList":["是否启用","enable","是否启用"]},{"curValue":"重新加载参数","keyValue":"重新加载参数","lasttime":"重新加载参数","valueList":["重新加载参数","reloadPara","重新加载参数"]},{"curValue":"刷新界面数据","keyValue":"刷新界面数据","lasttime":"刷新界面数据","valueList":["刷新界面数据","update UI","刷新界面数据"]},{"curValue":"1 使用 0 不使用","keyValue":"1.use 0.nonuse","lasttime":"1.use 0.nonuse","valueList":["1 使用 0 不使用","1.use 0.nonuse","1 使用 0 不使用"]},{"curValue":"发送心跳包的时间 单位秒","keyValue":"interval time of sending heartbeating package unit :s","lasttime":"interval time of sending heartbeating package unit :s","valueList":["发送心跳包的时间 单位秒","interval time of sending heartbeating package unit :s","发送心跳包的时间 单位秒"]},{"curValue":"测试心跳包指令","keyValue":"commuination heartbeating package:send command to test whether communication is ok ","lasttime":"commuination heartbeating package:send command to test whether communication is ok ","valueList":["测试心跳包指令","commuination heartbeating package:send command to test whether communication is ok ","测试心跳包指令"]},{"curValue":"心跳包返回值","keyValue":"communication heartbeating package:after sending test command,the return results from device contains part of the characters string,if including,the commuication system is normal. ","lasttime":"communication heartbeating package:after sending test command,the return results from device contains part of the characters string,if including,the commuication system is normal. ","valueList":["心跳包返回值","communication heartbeating package:after sending test command,the return results from device contains part of the characters string,if including,the commuication system is normal. ","心跳包返回值"]},{"curValue":"重试等待时间 单位秒","keyValue":"set for close char of communication ,like Omron and Panasonic's is \\r","lasttime":"set for close char of communication ,like Omron and Panasonic's is \\r","valueList":["重试等待时间 单位秒","set for close char of communication ,like Omron and Panasonic's is \\r","重试等待时间 单位秒"]},{"curValue":"重新连接时间间隔","keyValue":"interval time after connect failure ,unit:ms ","lasttime":"interval time after connect failure ,unit:ms ","valueList":["重新连接时间间隔","interval time after connect failure ,unit:ms ","重新连接时间间隔"]},{"curValue":"单次最大返回时间","keyValue":" the MAX OT of returning unit:MS","lasttime":" the MAX OT of returning unit:MS","valueList":["单次最大返回时间"," the MAX OT of returning unit:MS","单次最大返回时间"]},{"curValue":"单次时间间隔","keyValue":"set for reading the max Ot of returning , ms","lasttime":"set for reading the max Ot of returning , ms","valueList":["单次时间间隔","set for reading the max Ot of returning , ms","单次时间间隔"]},{"curValue":"1调试模式 0正常模式","keyValue":"1.debug model 0.normal operation","lasttime":"1.debug model 0.normal operation","valueList":["1调试模式 0正常模式","1.debug model 0.normal operation","1调试模式 0正常模式"]},{"curValue":"保存当前数据","keyValue":"save all current date option","lasttime":"save all current date option","valueList":["保存当前数据","save all current date option","保存当前数据"]},{"curValue":"读取位地址","keyValue":"separator ,for example :2800.02 means current read PLC a address strat from R zone 2800,after 2 character ","lasttime":"separator ,for example :2800.02 means current read PLC a address strat from R zone 2800,after 2 character ","valueList":["读取位地址","separator ,for example :2800.02 means current read PLC a address strat from R zone 2800,after 2 character ","读取位地址"]},{"curValue":"写位地址","keyValue":"separator,3000.02 means current writting PLC from R zone, a address start from 3000,after 2character,the address of write and read can't intersection ","lasttime":"separator,3000.02 means current writting PLC from R zone, a address start from 3000,after 2character,the address of write and read can't intersection ","valueList":["写位地址","separator,3000.02 means current writting PLC from R zone, a address start from 3000,after 2character,the address of write and read can't intersection ","写位地址"]},{"curValue":"读D地址","keyValue":"separator ,5056.10means current PLC from D zone,a address start from 5056,after 10 character","lasttime":"separator ,5056.10means current PLC from D zone,a address start from 5056,after 10 character","valueList":["读D地址","separator ,5056.10means current PLC from D zone,a address start from 5056,after 10 character","读D地址"]},{"curValue":"扩展地址","keyValue":"for example RR2800.01,WR3000.01,RD3500.03 means read one character after 2800,write one more character,read D area,after 3character from 3500,comma is separator","lasttime":"for example RR2800.01,WR3000.01,RD3500.03 means read one character after 2800,write one more character,read D area,after 3character from 3500,comma is separator","valueList":["扩展地址","for example RR2800.01,WR3000.01,RD3500.03 means read one character after 2800,write one more character,read D area,after 3character from 3500,comma is separator","扩展地址"]},{"curValue":"显示格式","keyValue":"IO display format,R%FO:FO means no display decimal point ( Mitsubishi PLC M zone),F2 means two decimal point (OmronPLcR","lasttime":"IO display format,R%FO:FO means no display decimal point ( Mitsubishi PLC M zone),F2 means two decimal point (OmronPLcR","valueList":["显示格式","IO display format,R%FO:FO means no display decimal point ( Mitsubishi PLC M zone),F2 means two decimal point (OmronPLcR","显示格式"]},{"curValue":"串口名称","keyValue":"the name of com ,the way of name :COM+integer ,for example COM1,COM2,COM3 etc...","lasttime":"the name of com ,the way of name :COM+integer ,for example COM1,COM2,COM3 etc...","valueList":["串口名称","the name of com ,the way of name :COM+integer ,for example COM1,COM2,COM3 etc...","串口名称"]},{"curValue":"波特率","keyValue":"Baud rate of com,common optial:1200,2400,4800,9600,19200,38400,57600,115200","lasttime":"Baud rate of com,common optial:1200,2400,4800,9600,19200,38400,57600,115200","valueList":["波特率","Baud rate of com,common optial:1200,2400,4800,9600,19200,38400,57600,115200","波特率"]},{"curValue":"数据位 :5,6,7,8","keyValue":"com bits :5,6,7,8","lasttime":"com bits :5,6,7,8","valueList":["数据位 :5,6,7,8","com bits :5,6,7,8","数据位 :5,6,7,8"]},{"curValue":"校验位 :E 偶校验 check 0:奇校验","keyValue":"check bit:E even parity check 0:odd parity check","lasttime":"check bit:E even parity check 0:odd parity check","valueList":["校验位 :E 偶校验 check 0:奇校验","check bit:E even parity check 0:odd parity check","校验位 :E 偶校验 check 0:奇校验"]},{"curValue":"停止位 , :1,5,2","keyValue":"stop bit of com ,nomal :1,5,2","lasttime":"stop bit of com ,nomal :1,5,2","valueList":["停止位 , :1,5,2","stop bit of com ,nomal :1,5,2","停止位 , :1,5,2"]},{"curValue":"读条码指令","keyValue":"send command to scanner while its scanning","lasttime":"send command to scanner while its scanning","valueList":["读条码指令","send command to scanner while its scanning","读条码指令"]},{"curValue":"停止读码指令","keyValue":"send command to scanner while its stopped","lasttime":"send command to scanner while its stopped","valueList":["停止读码指令","send command to scanner while its stopped","停止读码指令"]},{"curValue":"plc点位","keyValue":"PLC IO point, normal for R zone or M zone, Panasonic PLC write to as 69.15,Omron 2800 write to as 2800,Mitsubishi write to as 7500","lasttime":"PLC IO point, normal for R zone or M zone, Panasonic PLC write to as 69.15,Omron 2800 write to as 2800,Mitsubishi write to as 7500","valueList":["plc点位","PLC IO point, normal for R zone or M zone, Panasonic PLC write to as 69.15,Omron 2800 write to as 2800,Mitsubishi write to as 7500","plc点位"]},{"curValue":"_是否右边不检测空料","keyValue":"_是否右边不检测空料","lasttime":"_是否右边不检测空料","valueList":["_是否右边不检测空料","_ right not Check Null","_是否右边不检测空料"]},{"curValue":"_预留","keyValue":"_预留","lasttime":"_预留","valueList":["_预留","_tbd","_预留"]},{"curValue":"_是否间距按钮切换/按钮","keyValue":"_是否间距按钮切换/按钮","lasttime":"_是否间距按钮切换/按钮","valueList":["_是否间距按钮切换/按钮","_enable distance change","_是否间距按钮切换/按钮"]},{"curValue":"_是否启用寿命管控","keyValue":"_是否启用寿命管控","lasttime":"_是否启用寿命管控","valueList":["_是否启用寿命管控","_enable use Time","_是否启用寿命管控"]},{"curValue":"_是否简易版","keyValue":"_是否简易版","lasttime":"_是否简易版","valueList":["_是否简易版","_is Simple Version","_是否简易版"]},{"curValue":"_是否屏蔽急停屏蔽","keyValue":"_是否屏蔽急停屏蔽","lasttime":"_是否屏蔽急停屏蔽","valueList":["_是否屏蔽急停屏蔽","_enable Emergcy Button","_是否屏蔽急停屏蔽"]},{"curValue":"_是否电池报警屏蔽","keyValue":"_是否电池报警屏蔽","lasttime":"_是否电池报警屏蔽","valueList":["_是否电池报警屏蔽","_enable Battery Alarm","_是否电池报警屏蔽"]},{"curValue":"_条码ng","keyValue":"_条码ng","lasttime":"_条码ng","valueList":["_条码ng","_barCode NG","_条码ng"]},{"curValue":"_急停","keyValue":"_急停","lasttime":"_急停","valueList":["_急停","_emergency","_急停"]},{"curValue":"0~1之间，中间用',' 逗号分隔","keyValue":"0~1之间，中间用',' 逗号分隔","lasttime":"0~1之间，中间用',' 逗号分隔","valueList":["0~1之间，中间用',' 逗号分隔","between 0~1，split by ',' A comma","0~1之间，中间用',' 逗号分隔"]},{"curValue":" 线程开始","keyValue":" 线程开始","lasttime":" 线程开始","valueList":[" 线程开始","thread start"," 线程开始"]},{"curValue":"_有预撕模","keyValue":"_有预撕模","lasttime":"_有预撕模","valueList":["_有预撕模","_enable preclip","_有预撕模"]},{"curValue":"是否使用光纤放大器","keyValue":"是否使用光纤放大器","lasttime":"是否使用光纤放大器","valueList":["是否使用光纤放大器","enable FibreMoudle","是否使用光纤放大器"]},{"curValue":"料带运动速度单位mm/s","keyValue":"料带运动速度单位mm/s","lasttime":"料带运动速度单位mm/s","valueList":["料带运动速度单位mm/s","product move speed mm/s","料带运动速度单位mm/s"]},{"curValue":"关机时间","keyValue":"关机时间","lasttime":"关机时间","valueList":["关机时间","shutDownTime","关机时间"]},{"curValue":"有料空料空间L","keyValue":"有料空料空间L","lasttime":"有料空料空间L","valueList":["有料空料空间L","fullProductarea L","有料空料空间L"]},{"curValue":"有料空料比例系数L","keyValue":"有料空料比例系数L","lasttime":"有料空料比例系数L","valueList":["有料空料比例系数L","scale_Full_Null_L","有料空料比例系数L"]},{"curValue":"有料空料空间R","keyValue":"有料空料空间R","lasttime":"有料空料空间R","valueList":["有料空料空间R","procutAreaR","有料空料空间R"]},{"curValue":"有料空料比例系数R","keyValue":"有料空料比例系数R","lasttime":"有料空料比例系数R","valueList":["有料空料比例系数R","scale_Full_Null_R","有料空料比例系数R"]},{"curValue":"对比条码设置","keyValue":"对比条码设置","lasttime":"对比条码设置","valueList":["对比条码设置","barCode check Setting","对比条码设置"]},{"curValue":"对比位数：","keyValue":"对比位数：","lasttime":"对比位数：","valueList":["对比位数：","check bits Number","对比位数："]},{"curValue":"对比起始位：","keyValue":"对比起始位：","lasttime":"对比起始位：","valueList":["对比起始位：","check start bit","对比起始位："]},{"curValue":"保存设置","keyValue":"保存设置","lasttime":"保存设置","valueList":["保存设置","save setting","保存设置"]},{"curValue":"文件不存在","keyValue":"文件不存在","lasttime":"文件不存在","valueList":["文件不存在","file Not Exist","文件不存在"]},{"curValue":"`接料机 v2018.07.16","keyValue":"`接料机 v2018.07.16","lasttime":"`接料机 v2018.07.16","valueList":["`接料机 v2018.07.16","splic machine v2018.07.16","`接料机 v2018.07.16"]},{"curValue":"新物料条码：","keyValue":"新物料条码：","lasttime":"新物料条码：","valueList":["新物料条码：","new BarCode：","新物料条码："]},{"curValue":"设备/槽位:","keyValue":"设备/槽位:","lasttime":"设备/槽位:","valueList":["设备/槽位:","MC/slot:","设备/槽位:"]},{"curValue":"旧物料编码","keyValue":"旧物料编码","lasttime":"旧物料编码","valueList":["旧物料编码","old barCode","旧物料编码"]},{"curValue":"物料信息","keyValue":"物料信息","lasttime":"物料信息","valueList":["物料信息","product info","物料信息"]},{"curValue":"槽位","keyValue":"槽位","lasttime":"槽位","valueList":["槽位","slot","槽位"]},{"curValue":"飞达号","keyValue":"飞达号","lasttime":"飞达号","valueList":["飞达号","feeder Number","飞达号"]},{"curValue":"物料代码","keyValue":"物料代码","lasttime":"物料代码","valueList":["物料代码","marterial Number","物料代码"]},{"curValue":"数量","keyValue":"数量","lasttime":"数量","valueList":["数量","number","数量"]},{"curValue":"打印配置","keyValue":"打印配置","lasttime":"打印配置","valueList":["打印配置","print setting","打印配置"]},{"curValue":"执行","keyValue":"执行","lasttime":"执行","valueList":["执行","action","执行"]},{"curValue":"操作信息：","keyValue":"操作信息：","lasttime":"操作信息：","valueList":["操作信息：","operate info：","操作信息："]},{"curValue":"打印测试","keyValue":"打印测试","lasttime":"打印测试","valueList":["打印测试","print test","打印测试"]},{"curValue":"调用test1","keyValue":"调用test1","lasttime":"调用test1","valueList":["调用test1"," test1","调用test1"]},{"curValue":"调用test2","keyValue":"调用test2","lasttime":"调用test2","valueList":["调用test2","test2","调用test2"]},{"curValue":"1=选择打印机打印 2 = 直接向打印机ip发数据","keyValue":"1=选择打印机打印 2 = 直接向打印机ip发数据","lasttime":"1=选择打印机打印 2 = 直接向打印机ip发数据","valueList":["1=选择打印机打印 2 = 直接向打印机ip发数据","1=select printer 2 = use ip toSend cmd","1=选择打印机打印 2 = 直接向打印机ip发数据"]},{"curValue":"打印参数设置","keyValue":"打印参数设置","lasttime":"打印参数设置","valueList":["打印参数设置","print para setting","打印参数设置"]},{"curValue":"调整标签左坐标：","keyValue":"调整标签左坐标：","lasttime":"调整标签左坐标：","valueList":["调整标签左坐标：","adjust label topLeft position","调整标签左坐标："]},{"curValue":"调整打印坐标 x = ","keyValue":"调整打印坐标 x = ","lasttime":"调整打印坐标 x = ","valueList":["调整打印坐标 x = ","adjust print postion x = ","调整打印坐标 x = "]},{"curValue":"调整标签间距：","keyValue":"调整标签间距：","lasttime":"调整标签间距：","valueList":["调整标签间距：","adjust label distance：","调整标签间距："]},{"curValue":"标签名称","keyValue":"标签名称","lasttime":"标签名称","valueList":["标签名称","label name","标签名称"]},{"curValue":"打印机ip","keyValue":"打印机ip","lasttime":"打印机ip","valueList":["打印机ip","printer ip","打印机ip"]},{"curValue":"打印机端口","keyValue":"打印机端口","lasttime":"打印机端口","valueList":["打印机端口","printer port","打印机端口"]},{"curValue":"1：通过路由器，0:直接连接相机","keyValue":"1：通过路由器，0:直接连接相机","lasttime":"1：通过路由器，0:直接连接相机","valueList":["1：通过路由器，0:直接连接相机","1：by Router，0:direct connect ip","1：通过路由器，0:直接连接相机"]},{"curValue":"1：表示保存处理ng的图像，0：表示不保存","keyValue":"1：表示保存处理ng的图像，0：表示不保存","lasttime":"1：表示保存处理ng的图像，0：表示不保存","valueList":["1：表示保存处理ng的图像，0：表示不保存","1：save ng image，0：none save","1：表示保存处理ng的图像，0：表示不保存"]},{"curValue":"单位毫秒","keyValue":"单位毫秒","lasttime":"单位毫秒","valueList":["单位毫秒","unit ","单位毫秒"]},{"curValue":"单位毫秒，","keyValue":"单位毫秒，","lasttime":"单位毫秒，","valueList":["单位毫秒，","unit ms","单位毫秒，"]},{"curValue":"单位：张","keyValue":"单位：张","lasttime":"单位：张","valueList":["单位：张","unit piece","单位：张"]},{"curValue":"相机ID/相机名称 （真实的相机才有相机id/名称）","keyValue":"相机ID/相机名称 （真实的相机才有相机id/名称）","lasttime":"相机ID/相机名称 （真实的相机才有相机id/名称）","valueList":["相机ID/相机名称 （真实的相机才有相机id/名称）","camera id","相机ID/相机名称 （真实的相机才有相机id/名称）"]},{"curValue":"相机ip地址 （真实的相机才有相机iP地址称）","keyValue":"相机ip地址 （真实的相机才有相机iP地址称）","lasttime":"相机ip地址 （真实的相机才有相机iP地址称）","valueList":["相机ip地址 （真实的相机才有相机iP地址称）","camera ip","相机ip地址 （真实的相机才有相机iP地址称）"]},{"curValue":"虚拟相机的文件夹路径（文件夹内必须有图片）","keyValue":"虚拟相机的文件夹路径（文件夹内必须有图片）","lasttime":"虚拟相机的文件夹路径（文件夹内必须有图片）","valueList":["虚拟相机的文件夹路径（文件夹内必须有图片）","virtrul camera directory","虚拟相机的文件夹路径（文件夹内必须有图片）"]},{"curValue":"相机拍照时，曝光的时间（单位：us）","keyValue":"相机拍照时，曝光的时间（单位：us）","lasttime":"相机拍照时，曝光的时间（单位：us）","valueList":["相机拍照时，曝光的时间（单位：us）","expose time","相机拍照时，曝光的时间（单位：us）"]},{"curValue":"相机拍照时，增益系数（0~100）","keyValue":"相机拍照时，增益系数（0~100）","lasttime":"相机拍照时，增益系数（0~100）","valueList":["相机拍照时，增益系数（0~100）","camera gain","相机拍照时，增益系数（0~100）"]},{"curValue":"0=同步工作模式，1= 表示异步工作模式","keyValue":"0=同步工作模式，1= 表示异步工作模式","lasttime":"0=同步工作模式，1= 表示异步工作模式","valueList":["0=同步工作模式，1= 表示异步工作模式","0=asys ，1= ansys","0=同步工作模式，1= 表示异步工作模式"]},{"curValue":"异步下有效，当连续 x ms后未取图则自动进入待机模式","keyValue":"异步下有效，当连续 x ms后未取图则自动进入待机模式","lasttime":"异步下有效，当连续 x ms后未取图则自动进入待机模式","valueList":["异步下有效，当连续 x ms后未取图则自动进入待机模式","----","异步下有效，当连续 x ms后未取图则自动进入待机模式"]},{"curValue":"设置通信的Ip地址","keyValue":"设置通信的Ip地址","lasttime":"设置通信的Ip地址","valueList":["设置通信的Ip地址","set ip","设置通信的Ip地址"]},{"curValue":"设置通信的端口号","keyValue":"设置通信的端口号","lasttime":"设置通信的端口号","valueList":["设置通信的端口号","set port","设置通信的端口号"]},{"curValue":"图像显示的行距","keyValue":"图像显示的行距","lasttime":"图像显示的行距","valueList":["图像显示的行距","row distance","图像显示的行距"]},{"curValue":"01：只显示文字,10：只显示图标,11：都显示","keyValue":"01：只显示文字,10：只显示图标,11：都显示","lasttime":"01：只显示文字,10：只显示图标,11：都显示","valueList":["01：只显示文字,10：只显示图标,11：都显示","01：only text,10：only icon,11：disp all","01：只显示文字,10：只显示图标,11：都显示"]},{"curValue":"图像显示窗口内的图像宽度","keyValue":"图像显示窗口内的图像宽度","lasttime":"图像显示窗口内的图像宽度","valueList":["图像显示窗口内的图像宽度","dispaly width","图像显示窗口内的图像宽度"]},{"curValue":"图像显示窗口内的图像高度","keyValue":"图像显示窗口内的图像高度","lasttime":"图像显示窗口内的图像高度","valueList":["图像显示窗口内的图像高度","display height","图像显示窗口内的图像高度"]},{"curValue":"1:当光标在图像窗口内，会实时显示颜色和坐标, 0:不显示","keyValue":"1:当光标在图像窗口内，会实时显示颜色和坐标, 0:不显示","lasttime":"1:当光标在图像窗口内，会实时显示颜色和坐标, 0:不显示","valueList":["1:当光标在图像窗口内，会实时显示颜色和坐标, 0:不显示","-----","1:当光标在图像窗口内，会实时显示颜色和坐标, 0:不显示"]},{"curValue":"左相机","keyValue":"左相机","lasttime":"左相机","valueList":["左相机","left camera","左相机"]},{"curValue":"右相机","keyValue":"右相机","lasttime":"右相机","valueList":["右相机","right camera","右相机"]},{"curValue":"间距","keyValue":"间距","lasttime":"间距","valueList":["间距","distance","间距"]},{"curValue":"条码","keyValue":"条码","lasttime":"条码","valueList":["条码","barCode","条码"]},{"curValue":"复位","keyValue":"复位","lasttime":"复位","valueList":["复位","reset","复位"]},{"curValue":"急停","keyValue":"急停","lasttime":"急停","valueList":["急停","emergency ","急停"]},{"curValue":"放大","keyValue":"放大","lasttime":"放大","valueList":["放大","zoom out","放大"]},{"curValue":"缩小","keyValue":"缩小","lasttime":"缩小","valueList":["缩小","zoom in","缩小"]},{"curValue":"适应窗口","keyValue":"适应窗口","lasttime":"适应窗口","valueList":["适应窗口","fit window","适应窗口"]},{"curValue":"适应图像","keyValue":"适应图像","lasttime":"适应图像","valueList":["适应图像","fit image","适应图像"]},{"curValue":"清除图像","keyValue":"清除图像","lasttime":"清除图像","valueList":["清除图像","cls image","清除图像"]},{"curValue":"选项","keyValue":"选项","lasttime":"选项","valueList":["选项","option","选项"]},{"curValue":"显示图标","keyValue":"显示图标","lasttime":"显示图标","valueList":["显示图标","display icon","显示图标"]},{"curValue":"显示文字","keyValue":"显示文字","lasttime":"显示文字","valueList":["显示文字","display text","显示文字"]},{"curValue":"显示图标和文字","keyValue":"显示图标和文字","lasttime":"显示图标和文字","valueList":["显示图标和文字","display icon and text","显示图标和文字"]},{"curValue":"打开","keyValue":"打开","lasttime":"打开","valueList":["打开","open","打开"]},{"curValue":"保存","keyValue":"保存","lasttime":"保存","valueList":["保存","save","保存"]},{"curValue":"另存为","keyValue":"另存为","lasttime":"另存为","valueList":["另存为","save as","另存为"]},{"curValue":"采集","keyValue":"采集","lasttime":"采集","valueList":["采集","grab a frame","采集"]},{"curValue":"实时采集","keyValue":"实时采集","lasttime":"实时采集","valueList":["实时采集","continus grab","实时采集"]},{"curValue":"实时图像信息","keyValue":"实时图像信息","lasttime":"实时图像信息","valueList":["实时图像信息","cur info","实时图像信息"]},{"curValue":"处理","keyValue":"处理","lasttime":"处理","valueList":["处理","process","处理"]},{"curValue":"左上光源","keyValue":"左上光源","lasttime":"左上光源","valueList":["左上光源","left light","左上光源"]},{"curValue":"右上光源","keyValue":"右上光源","lasttime":"右上光源","valueList":["右上光源","right light","右上光源"]},{"curValue":"等待\r\n扫码中.","keyValue":"等待\r\n扫码中.","lasttime":"等待\r\n扫码中.","valueList":["等待\r\n扫码中.","waiting scann","等待\r\n扫码中."]},{"curValue":"凸轮速度","keyValue":"凸轮速度","lasttime":"凸轮速度","valueList":["凸轮速度","the speed of the cam","凸轮速度"]},{"curValue":"吸料横移速度","keyValue":"吸料横移速度","lasttime":"吸料横移速度","valueList":["吸料横移速度","pipe moving speed","吸料横移速度"]},{"curValue":"凸轮切刀位","keyValue":"凸轮切刀位","lasttime":"凸轮切刀位","valueList":["凸轮切刀位","the position of the cutter","凸轮切刀位"]},{"curValue":"凸轮包胶位","keyValue":"凸轮包胶位","lasttime":"凸轮包胶位","valueList":["凸轮包胶位","adjust the tape(cutter)","凸轮包胶位"]},{"curValue":"凸轮取料位","keyValue":"凸轮取料位","lasttime":"凸轮取料位","valueList":["凸轮取料位","catch the material(cutter)","凸轮取料位"]},{"curValue":"预撕位置","keyValue":"预撕位置","lasttime":"预撕位置","valueList":["预撕位置","Advance to tear location","预撕位置"]},{"curValue":"预撕时间","keyValue":"预撕时间","lasttime":"预撕时间","valueList":["预撕时间","the time of advance tear ","预撕时间"]},{"curValue":"回原点","keyValue":"回原点","lasttime":"回原点","valueList":["回原点","go back","回原点"]},{"curValue":"包胶位置","keyValue":"包胶位置","lasttime":"包胶位置","valueList":["包胶位置","the position of tape","包胶位置"]},{"curValue":"设备版本型号","keyValue":"设备版本型号","lasttime":"设备版本型号","valueList":["设备版本型号","Equipment version","设备版本型号"]},{"curValue":"1 使用 0 不使用","keyValue":"1 使用 0 不使用","lasttime":"1 使用 0 不使用","valueList":["1 使用 0 不使用","1 on 0 off","1 使用 0 不使用"]},{"curValue":"发送心跳包的时间 单位秒","keyValue":"发送心跳包的时间 单位秒","lasttime":"发送心跳包的时间 单位秒","valueList":["发送心跳包的时间 单位秒","the time of sending the heartbeat unit:second","发送心跳包的时间 单位秒"]},{"curValue":"测试心跳包指令","keyValue":"测试心跳包指令","lasttime":"测试心跳包指令","valueList":["测试心跳包指令","the command of testing heartbeat","测试心跳包指令"]},{"curValue":"心跳包返回值","keyValue":"心跳包返回值","lasttime":"心跳包返回值","valueList":["心跳包返回值","heartbeat return","心跳包返回值"]},{"curValue":"重试等待时间 单位秒","keyValue":"重试等待时间 单位秒","lasttime":"重试等待时间 单位秒","valueList":["重试等待时间 单位秒","wait time for retry unit:second","重试等待时间 单位秒"]},{"curValue":"重新连接时间间隔","keyValue":"重新连接时间间隔","lasttime":"重新连接时间间隔","valueList":["重新连接时间间隔","reconnect interval","重新连接时间间隔"]},{"curValue":"单次最大返回时间","keyValue":"单次最大返回时间","lasttime":"单次最大返回时间","valueList":["单次最大返回时间","single maximum return time","单次最大返回时间"]},{"curValue":"单次时间间隔","keyValue":"单次时间间隔","lasttime":"单次时间间隔","valueList":["单次时间间隔","single time interval","单次时间间隔"]},{"curValue":"1调试模式 0正常模式","keyValue":"1调试模式 0正常模式","lasttime":"1调试模式 0正常模式","valueList":["1调试模式 0正常模式","1debug 0normal","1调试模式 0正常模式"]},{"curValue":"保存当前数据","keyValue":"保存当前数据","lasttime":"保存当前数据","valueList":["保存当前数据","save the data at present","保存当前数据"]},{"curValue":"读取位地址","keyValue":"读取位地址","lasttime":"读取位地址","valueList":["读取位地址","read address","读取位地址"]},{"curValue":"写位地址","keyValue":"写位地址","lasttime":"写位地址","valueList":["写位地址","write address","写位地址"]},{"curValue":"读D地址","keyValue":"读D地址","lasttime":"读D地址","valueList":["读D地址","read D address","读D地址"]},{"curValue":"扩展地址","keyValue":"扩展地址","lasttime":"扩展地址","valueList":["扩展地址","expand address","扩展地址"]},{"curValue":"显示格式","keyValue":"显示格式","lasttime":"显示格式","valueList":["显示格式","display format","显示格式"]},{"curValue":"串口名称","keyValue":"串口名称","lasttime":"串口名称","valueList":["串口名称","a serial port name","串口名称"]},{"curValue":"数据位 :5,6,7,8","keyValue":"数据位 :5,6,7,8","lasttime":"数据位 :5,6,7,8","valueList":["数据位 :5,6,7,8","the position of the data :5,6,7,8","数据位 :5,6,7,8"]},{"curValue":"校验位 :E 偶校验 check 0:奇校验","keyValue":"校验位 :E 偶校验 check 0:奇校验","lasttime":"校验位 :E 偶校验 check 0:奇校验","valueList":["校验位 :E 偶校验 check 0:奇校验","parity bit :E even check 0:odd","校验位 :E 偶校验 check 0:奇校验"]},{"curValue":"停止位 , :1,5,2","keyValue":"停止位 , :1,5,2","lasttime":"停止位 , :1,5,2","valueList":["停止位 , :1,5,2","stop position , :1,5,2","停止位 , :1,5,2"]},{"curValue":"plc点位","keyValue":"plc点位","lasttime":"plc点位","valueList":["plc点位","plc point position","plc点位"]},{"curValue":"读条码指令","keyValue":"读条码指令","lasttime":"读条码指令","valueList":["读条码指令","the command of reading code","读条码指令"]},{"curValue":"停止读码指令","keyValue":"停止读码指令","lasttime":"停止读码指令","valueList":["停止读码指令","stop the command of reading code","停止读码指令"]},{"curValue":"左侧拍照完成","keyValue":"左侧拍照完成","lasttime":"左侧拍照完成","valueList":["左侧拍照完成","finished taking pictures on the left","左侧拍照完成"]},{"curValue":"右侧拍照完成","keyValue":"右侧拍照完成","lasttime":"右侧拍照完成","valueList":["右侧拍照完成","finished taking pictures on the right","右侧拍照完成"]},{"curValue":"1表示播放，0表示不播放","keyValue":"1表示播放，0表示不播放","lasttime":"1表示播放，0表示不播放","valueList":["1表示播放，0表示不播放","1display，0do not display","1表示播放，0表示不播放"]},{"curValue":"左侧拍照开始","keyValue":"左侧拍照开始","lasttime":"左侧拍照开始","valueList":["左侧拍照开始","start taking pictures on the left","左侧拍照开始"]},{"curValue":"右侧拍照开始","keyValue":"右侧拍照开始","lasttime":"右侧拍照开始","valueList":["右侧拍照开始","start taking pictures on the right","右侧拍照开始"]},{"curValue":"等待第2次扫码","keyValue":"等待第2次扫码","lasttime":"等待第2次扫码","valueList":["等待第2次扫码","wait for the second scan","等待第2次扫码"]},{"curValue":"条码比对OK,等待接料","keyValue":"条码比对OK,等待接料","lasttime":"条码比对OK,等待接料","valueList":["条码比对OK,等待接料","pass pls feed","条码比对OK,等待接料"]},{"curValue":"usb输入条码延时自动输入","keyValue":"usb输入条码延时自动输入","lasttime":"usb输入条码延时自动输入","valueList":["usb输入条码延时自动输入","usb barcode input delayed auto-input","usb输入条码延时自动输入"]},{"curValue":"ok声音名称","keyValue":"ok声音名称","lasttime":"ok声音名称","valueList":["ok声音名称","ok voice name","ok声音名称"]},{"curValue":"ng声音名称","keyValue":"ng声音名称","lasttime":"ng声音名称","valueList":["ng声音名称","ng voice name","ng声音名称"]},{"curValue":"当扫码校验ok是否播放声音","keyValue":"当扫码校验ok是否播放声音","lasttime":"当扫码校验ok是否播放声音","valueList":["当扫码校验ok是否播放声音","whether to play sound or not when scan is ok","当扫码校验ok是否播放声音"]},{"curValue":"1：自动清空 0：扫描新条码才清空","keyValue":"1：自动清空 0：扫描新条码才清空","lasttime":"1：自动清空 0：扫描新条码才清空","valueList":["1：自动清空 0：扫描新条码才清空","1：auto-clear 0：clear when scan the new code","1：自动清空 0：扫描新条码才清空"]},{"curValue":"接料完成是否自动清空条码","keyValue":"接料完成是否自动清空条码","lasttime":"接料完成是否自动清空条码","valueList":["接料完成是否自动清空条码","clear barCode after splic finished","接料完成是否自动清空条码"]},{"curValue":"4大按钮字体大小","keyValue":"4大按钮字体大小","lasttime":"4大按钮字体大小","valueList":["4大按钮字体大小","mainbutton font size","4大按钮字体大小"]},{"curValue":"端口号可以设置，其他的参数固定为 波特率115200，偶校验，8数据位，1停止位 ","keyValue":"端口号可以设置，其他的参数固定为 波特率115200，偶校验，8数据位，1停止位 ","lasttime":"端口号可以设置，其他的参数固定为 波特率115200，偶校验，8数据位，1停止位 ","valueList":["端口号可以设置，其他的参数固定为 波特率115200，偶校验，8数据位，1停止位 ","can set portName other para 115200.E.8.1","端口号可以设置，其他的参数固定为 波特率115200，偶校验，8数据位，1停止位 "]},{"curValue":"保存日志","keyValue":"保存日志","lasttime":"保存日志","valueList":["保存日志","save log","保存日志"]},{"curValue":"接料机动作扫描","keyValue":"接料机动作扫描","lasttime":"接料机动作扫描","valueList":["接料机动作扫描","splic scan action","接料机动作扫描"]},{"curValue":"扫码屏蔽","keyValue":"扫码屏蔽","lasttime":"扫码屏蔽","valueList":["扫码屏蔽","disable scan barcode","扫码屏蔽"]},{"curValue":"扫码屏蔽,等待接料。。","keyValue":"扫码屏蔽,等待接料。。","lasttime":"扫码屏蔽,等待接料。。","valueList":["扫码屏蔽,等待接料。。","disable scan ,wait splic ","扫码屏蔽,等待接料。。"]},{"curValue":"避让位置","keyValue":"避让位置","lasttime":"避让位置","valueList":["避让位置","avoidance location","避让位置"]},{"curValue":"至避让位置","keyValue":"至避让位置","lasttime":"至避让位置","valueList":["至避让位置","to avoidance loation","至避让位置"]},{"curValue":"预撕进距离","keyValue":"预撕进距离","lasttime":"预撕进距离","valueList":["预撕进距离","pre-tearing distance","预撕进距离"]},{"curValue":"预撕反转时间","keyValue":"预撕反转时间","lasttime":"预撕反转时间","valueList":["预撕反转时间","pre-tearing toggle time","预撕反转时间"]},{"curValue":"网页","keyValue":"网页","lasttime":"网页","valueList":["网页","website","网页"]},{"curValue":"触发","keyValue":"触发","lasttime":"触发","valueList":["触发","trigger","触发"]},{"curValue":"写光纤值","keyValue":"写光纤值","lasttime":"写光纤值","valueList":["写光纤值","write firbr","写光纤值"]},{"curValue":"接料中","keyValue":"接料中","lasttime":"接料中","valueList":["接料中","splicing","接料中"]},{"curValue":"即将关机,\r\n剩余","keyValue":"即将关机,\r\n剩余","lasttime":"即将关机,\r\n剩余","valueList":["即将关机,\r\n剩余","coming soon shut down .remain","即将关机,\r\n剩余"]},{"curValue":"报警中","keyValue":"报警中","lasttime":"报警中","valueList":["报警中","alarming","报警中"]},{"curValue":"报警","keyValue":"报警","lasttime":"报警","valueList":["报警","alarming","报警"]},{"curValue":"即将关机","keyValue":"即将关机","lasttime":"即将关机","valueList":["即将关机"," shut down","即将关机"]},{"curValue":"剩余","keyValue":"剩余","lasttime":"剩余","valueList":["剩余","remain","剩余"]},{"curValue":"秒","keyValue":"秒","lasttime":"秒","valueList":["秒","second","秒"]},{"curValue":"复扫校验成功","keyValue":"复扫校验成功","lasttime":"复扫校验成功","valueList":["复扫校验成功","rescan check ok","复扫校验成功"]},{"curValue":"接收扫码信息","keyValue":"接收扫码信息","lasttime":"接收扫码信息","valueList":["接收扫码信息","receive new barcode","接收扫码信息"]},{"curValue":"接料机 v18.11.19","keyValue":"接料机 v18.11.19","lasttime":"接料机 v18.11.19","valueList":["接料机 v18.11.19","splic machine v18.11.19","接料机 v18.11.19"]},{"curValue":"Tcp端口号","keyValue":"Tcp端口号","lasttime":"Tcp端口号","valueList":["Tcp端口号","Tcp port","Tcp端口号"]},{"curValue":"Udp端口号","keyValue":"Udp端口号","lasttime":"Udp端口号","valueList":["Udp端口号","Udp port","Udp端口号"]},{"curValue":"串口端口号","keyValue":"串口端口号","lasttime":"串口端口号","valueList":["串口端口号","serial com portName","串口端口号"]},{"curValue":"mes返回等待时间","keyValue":"mes返回等待时间","lasttime":"mes返回等待时间","valueList":["mes返回等待时间","mes return time","mes返回等待时间"]},{"curValue":"接收到的条码是","keyValue":"接收到的条码是","lasttime":"接收到的条码是","valueList":["接收到的条码是","receive barcode is","接收到的条码是"]},{"curValue":"开始条码校验条码","keyValue":"开始条码校验条码","lasttime":"开始条码校验条码","valueList":["开始条码校验条码","start check barcode","开始条码校验条码"]},{"curValue":"新条码长度太短，至少8位","keyValue":"新条码长度太短，至少8位","lasttime":"新条码长度太短，至少8位","valueList":["新条码长度太短，至少8位","new barcode is too short","新条码长度太短，至少8位"]},{"curValue":"新条码不能为空","keyValue":"新条码不能为空","lasttime":"新条码不能为空","valueList":["新条码不能为空","new barcode cannot null","新条码不能为空"]},{"curValue":"mes校验返回值","keyValue":"mes校验返回值","lasttime":"mes校验返回值","valueList":["mes校验返回值","mes check return ","mes校验返回值"]},{"curValue":"mes校验返回值1","keyValue":"mes校验返回值1","lasttime":"mes校验返回值1","valueList":["mes校验返回值1","mes check return 1","mes校验返回值1"]},{"curValue":"旧条码不能为空","keyValue":"旧条码不能为空","lasttime":"旧条码不能为空","valueList":["旧条码不能为空","old barcode cannot be null","旧条码不能为空"]},{"curValue":"mes校验返回值2","keyValue":"mes校验返回值2","lasttime":"mes校验返回值2","valueList":["mes校验返回值2","mes check return 2","mes校验返回值2"]},{"curValue":"条码指示灯222","keyValue":"条码指示灯222","lasttime":"条码指示灯222","valueList":["条码指示灯222","barcode led 222","条码指示灯222"]},{"curValue":"先放料带模式等待扫码","keyValue":"先放料带模式等待扫码","lasttime":"先放料带模式等待扫码","valueList":["先放料带模式等待扫码","put product first","先放料带模式等待扫码"]},{"curValue":"第一部分","keyValue":"第一部分","lasttime":"第一部分","valueList":["第一部分","first part","第一部分"]},{"curValue":"第三部分","keyValue":"第三部分","lasttime":"第三部分","valueList":["第三部分","The third part","第三部分"]},{"curValue":"参数","keyValue":"参数","lasttime":"参数","valueList":["参数","para","参数"]},{"curValue":"进料超时","keyValue":"进料超时","lasttime":"进料超时","valueList":["进料超时","enter product time out","进料超时"]},{"curValue":"接料超时","keyValue":"接料超时","lasttime":"接料超时","valueList":["接料超时","splic product timeout","接料超时"]},{"curValue":"反转时间","keyValue":"反转时间","lasttime":"反转时间","valueList":["反转时间","motor run oppsite dir time","反转时间"]},{"curValue":"预撕距离","keyValue":"预撕距离","lasttime":"预撕距离","valueList":["预撕距离","pre distance","预撕距离"]},{"curValue":"预撕完对接速度","keyValue":"预撕完对接速度","lasttime":"预撕完对接速度","valueList":["预撕完对接速度","pre tear speed","预撕完对接速度"]},{"curValue":"查找空料速度","keyValue":"查找空料速度","lasttime":"查找空料速度","valueList":["查找空料速度","find null speed","查找空料速度"]},{"curValue":"当前位置(mm)","keyValue":"当前位置(mm)","lasttime":"当前位置(mm)","valueList":["当前位置(mm)","cur pos","当前位置(mm)"]},{"curValue":"向下","keyValue":"向下","lasttime":"向下","valueList":["向下","down","向下"]},{"curValue":"向上","keyValue":"向上","lasttime":"向上","valueList":["向上","up","向上"]},{"curValue":"检测更新","keyValue":"检测更新","lasttime":"检测更新","valueList":["检测更新","update","检测更新"]},{"curValue":"电磁铁","keyValue":"电磁铁","lasttime":"电磁铁","valueList":["电磁铁","electromagnet","电磁铁"]},{"curValue":"预撕电机","keyValue":"预撕电机","lasttime":"预撕电机","valueList":["预撕电机","pre tear motor","预撕电机"]},{"curValue":"凸轮预撕抬起","keyValue":"凸轮预撕抬起","lasttime":"凸轮预撕抬起","valueList":["凸轮预撕抬起","cam pre tear up","凸轮预撕抬起"]},{"curValue":"凸轮预撕压下","keyValue":"凸轮预撕压下","lasttime":"凸轮预撕压下","valueList":["凸轮预撕压下","cam pre tear press","凸轮预撕压下"]},{"curValue":"模拟量设置","keyValue":"模拟量设置","lasttime":"模拟量设置","valueList":["模拟量设置","ad settting","模拟量设置"]},{"curValue":"是否使用串口扫码枪_","keyValue":"是否使用串口扫码枪_","lasttime":"是否使用串口扫码枪_","valueList":["是否使用串口扫码枪_","use com scanner","是否使用串口扫码枪_"]},{"curValue":"取料带延时","keyValue":"取料带延时","lasttime":"取料带延时","valueList":["取料带延时","pick product time delay","取料带延时"]},{"curValue":"拨料1时间","keyValue":"拨料1时间","lasttime":"拨料1时间","valueList":["拨料1时间","Dial 1 time","拨料1时间"]},{"curValue":"拨料2时间","keyValue":"拨料2时间","lasttime":"拨料2时间","valueList":["拨料2时间","Dial 2 time","拨料2时间"]},{"curValue":"预移节距","keyValue":"预移节距","lasttime":"预移节距","valueList":["预移节距","Moves the pitch","预移节距"]},{"curValue":"割膜次数","keyValue":"割膜次数","lasttime":"割膜次数","valueList":["割膜次数","Cut the film times","割膜次数"]},{"curValue":"拨刀1","keyValue":"拨刀1","lasttime":"拨刀1","valueList":["拨刀1","Dial the dao 1","拨刀1"]},{"curValue":"拨刀2","keyValue":"拨刀2","lasttime":"拨刀2","valueList":["拨刀2","Dial the dao 2","拨刀2"]},{"curValue":"吸头","keyValue":"吸头","lasttime":"吸头","valueList":["吸头","suction","吸头"]},{"curValue":"流道","keyValue":"流道","lasttime":"流道","valueList":["流道","Flow channel","流道"]},{"curValue":"至拨出位(mm)","keyValue":"至拨出位(mm)","lasttime":"至拨出位(mm)","valueList":["至拨出位(mm)","To dial out (mm)","至拨出位(mm)"]},{"curValue":"拨刀速度","keyValue":"拨刀速度","lasttime":"拨刀速度","valueList":["拨刀速度","Dial the knife speed","拨刀速度"]},{"curValue":"至切刀位(mm)","keyValue":"至切刀位(mm)","lasttime":"至切刀位(mm)","valueList":["至切刀位(mm)","To the cutting edge (mm)","至切刀位(mm)"]},{"curValue":"吸头速度","keyValue":"吸头速度","lasttime":"吸头速度","valueList":["吸头速度","Suction speed","吸头速度"]},{"curValue":"送膜1速度","keyValue":"送膜1速度","lasttime":"送膜1速度","valueList":["送膜1速度","Film feeding speed 1","送膜1速度"]},{"curValue":"热熔位置","keyValue":"热熔位置","lasttime":"热熔位置","valueList":["热熔位置","Hot melt position","热熔位置"]},{"curValue":"至包胶位(mm)","keyValue":"至包胶位(mm)","lasttime":"至包胶位(mm)","valueList":["至包胶位(mm)","To glue level (mm)","至包胶位(mm)"]},{"curValue":"胶膜1吸位(mm)","keyValue":"胶膜1吸位(mm)","lasttime":"胶膜1吸位(mm)","valueList":["胶膜1吸位(mm)","Adhesive film 1 suction position (mm)","胶膜1吸位(mm)"]},{"curValue":"胶膜2吸位(mm)","keyValue":"胶膜2吸位(mm)","lasttime":"胶膜2吸位(mm)","valueList":["胶膜2吸位(mm)","Adhesive film 1 suction position (mm)","胶膜2吸位(mm)"]},{"curValue":"12mm拨出位","keyValue":"12mm拨出位","lasttime":"12mm拨出位","valueList":["12mm拨出位","12 mm dial stand out","12mm拨出位"]},{"curValue":"16mm拨出位","keyValue":"16mm拨出位","lasttime":"16mm拨出位","valueList":["16mm拨出位","16 mm dial stand out","16mm拨出位"]},{"curValue":"拨刀2速度","keyValue":"拨刀2速度","lasttime":"拨刀2速度","valueList":["拨刀2速度","Dial 2 speed","拨刀2速度"]},{"curValue":"送膜2速度","keyValue":"送膜2速度","lasttime":"送膜2速度","valueList":["送膜2速度","Film feeding speed 2","送膜2速度"]},{"curValue":"入料时","keyValue":"入料时","lasttime":"入料时","valueList":["入料时","In way","入料时"]},{"curValue":"夹紧时","keyValue":"夹紧时","lasttime":"夹紧时","valueList":["夹紧时","clamping","夹紧时"]},{"curValue":"8mm宽度","keyValue":"8mm宽度","lasttime":"8mm宽度","valueList":["8mm宽度","8 mm width","8mm宽度"]},{"curValue":"12mm宽度","keyValue":"12mm宽度","lasttime":"12mm宽度","valueList":["12mm宽度","12 mm width","12mm宽度"]},{"curValue":"16mm宽度","keyValue":"16mm宽度","lasttime":"16mm宽度","valueList":["16mm宽度","16 mm width","16mm宽度"]},{"curValue":"调宽速度","keyValue":"调宽速度","lasttime":"调宽速度","valueList":["调宽速度","Wide adjustable speed","调宽速度"]},{"curValue":"拨料带","keyValue":"拨料带","lasttime":"拨料带","valueList":["拨料带","Dial the strip","拨料带"]},{"curValue":"拨料带1","keyValue":"拨料带1","lasttime":"拨料带1","valueList":["拨料带1","Dial the strip 1","拨料带1"]},{"curValue":"拨料带2","keyValue":"拨料带2","lasttime":"拨料带2","valueList":["拨料带2","Dial the strip 2","拨料带2"]},{"curValue":"真空1","keyValue":"真空1","lasttime":"真空1","valueList":["真空1","vacuum 1","真空1"]},{"curValue":"真空2","keyValue":"真空2","lasttime":"真空2","valueList":["真空2","vacuum 2","真空2"]},{"curValue":"真空3","keyValue":"真空3","lasttime":"真空3","valueList":["真空3","vacuum 3","真空3"]},{"curValue":"拨一个料1","keyValue":"拨一个料1","lasttime":"拨一个料1","valueList":["拨一个料1","Pick a material 1","拨一个料1"]},{"curValue":"拨一个料2","keyValue":"拨一个料2","lasttime":"拨一个料2","valueList":["拨一个料2","Pick a material 2","拨一个料2"]},{"curValue":"从plc读取数据","keyValue":"从plc读取数据","lasttime":"从plc读取数据","valueList":["从plc读取数据","Read data from PLC","从plc读取数据"]},{"curValue":"io监控","keyValue":"io监控","lasttime":"io监控","valueList":["io监控","IO monitor","io监控"]},{"curValue":"左孔边","keyValue":"左孔边","lasttime":"左孔边","valueList":["左孔边","The left side of hole","左孔边"]},{"curValue":"左孔中心","keyValue":"左孔中心","lasttime":"左孔中心","valueList":["左孔中心","The center left hole","左孔中心"]},{"curValue":"左两孔中心","keyValue":"左两孔中心","lasttime":"左两孔中心","valueList":["左两孔中心","Center of left two holes","左两孔中心"]},{"curValue":"右孔边","keyValue":"右孔边","lasttime":"右孔边","valueList":["右孔边","The right side of hole","右孔边"]},{"curValue":"右孔中心","keyValue":"右孔中心","lasttime":"右孔中心","valueList":["右孔中心","The center right hole","右孔中心"]},{"curValue":"右两孔中心","keyValue":"右两孔中心","lasttime":"右两孔中心","valueList":["右两孔中心","Center of right two holes","右两孔中心"]},{"curValue":"孔中心","keyValue":"孔中心","lasttime":"孔中心","valueList":["孔中心","Hole center","孔中心"]},{"curValue":"孔边2","keyValue":"孔边2","lasttime":"孔边2","valueList":["孔边2","The side of hole 2","孔边2"]},{"curValue":"两孔中心","keyValue":"两孔中心","lasttime":"两孔中心","valueList":["两孔中心","Two hole center","两孔中心"]},{"curValue":"左","keyValue":"左","lasttime":"左","valueList":["左","On the left","左"]},{"curValue":"右","keyValue":"右","lasttime":"右","valueList":["右","On the right","右"]},{"curValue":"切刀位不屏蔽","keyValue":"切刀位不屏蔽","lasttime":"切刀位不屏蔽","valueList":["切刀位不屏蔽","Cutter bitDon't block","切刀位不屏蔽"]},{"curValue":"拨料时间","keyValue":"拨料时间","lasttime":"拨料时间","valueList":["拨料时间","briar dressing time","拨料时间"]},{"curValue":"格式=a|A;b|B;\r\n表示将a替换成A，将b替换成B","keyValue":"格式=a|A;b|B;\r\n表示将a替换成A，将b替换成B","lasttime":"格式=a|A;b|B;\r\n表示将a替换成A，将b替换成B","valueList":["格式=a|A;b|B;\r\n表示将a替换成A，将b替换成B","format=a|A;b|B;\r\nreplace a to A ，replace b to B","格式=a|A;b|B;\r\n表示将a替换成A，将b替换成B"]},{"curValue":"是否进行字符替换 （必须是英文输入法）","keyValue":"是否进行字符替换 （必须是英文输入法）","lasttime":"是否进行字符替换 （必须是英文输入法）","valueList":["是否进行字符替换 （必须是英文输入法）","replace char or not","是否进行字符替换 （必须是英文输入法）"]},{"curValue":"相机设置","keyValue":"相机设置","lasttime":"相机设置","valueList":["相机设置","ccd setting","相机设置"]},{"curValue":"图像处理","keyValue":"图像处理","lasttime":"图像处理","valueList":["图像处理","image process","图像处理"]},{"curValue":"测试条码","keyValue":"测试条码","lasttime":"测试条码","valueList":["测试条码","barcode","测试条码"]},{"curValue":"必须不一致","keyValue":"必须不一致","lasttime":"必须不一致","valueList":["必须不一致","must different","必须不一致"]},{"curValue":"必须一致","keyValue":"必须一致","lasttime":"必须一致","valueList":["必须一致","must equal","必须一致"]},{"curValue":"查看","keyValue":"查看","lasttime":"查看","valueList":["查看","show","查看"]},{"curValue":"设置图像处理参数","keyValue":"设置图像处理参数","lasttime":"设置图像处理参数","valueList":["设置图像处理参数","set deal image para","设置图像处理参数"]},{"curValue":"自动设置ROI","keyValue":"自动设置ROI","lasttime":"自动设置ROI","valueList":["自动设置ROI","auto set roi","自动设置ROI"]},{"curValue":"提示：当前位置x=","keyValue":"提示：当前位置x=","lasttime":"提示：当前位置x=","valueList":["提示：当前位置x=","tips :curpos =","提示：当前位置x="]},{"curValue":"打开图像","keyValue":"打开图像","lasttime":"打开图像","valueList":["打开图像","open image","打开图像"]},{"curValue":"右侧相机","keyValue":"右侧相机","lasttime":"右侧相机","valueList":["右侧相机","right cam","右侧相机"]},{"curValue":"区域名称","keyValue":"区域名称","lasttime":"区域名称","valueList":["区域名称","region name","区域名称"]},{"curValue":"曝光值","keyValue":"曝光值","lasttime":"曝光值","valueList":["曝光值","exposing time","曝光值"]},{"curValue":"连续","keyValue":"连续","lasttime":"连续","valueList":["连续","continue","连续"]},{"curValue":"忙碌模式","keyValue":"忙碌模式","lasttime":"忙碌模式","valueList":["忙碌模式","busy mode","忙碌模式"]},{"curValue":"显示裁剪区域","keyValue":"显示裁剪区域","lasttime":"显示裁剪区域","valueList":["显示裁剪区域","disp region","显示裁剪区域"]},{"curValue":"设置底边","keyValue":"设置底边","lasttime":"设置底边","valueList":["设置底边","set bottom","设置底边"]},{"curValue":"设置右边","keyValue":"设置右边","lasttime":"设置右边","valueList":["设置右边","set right","设置右边"]},{"curValue":"设置左边","keyValue":"设置左边","lasttime":"设置左边","valueList":["设置左边","set left","设置左边"]},{"curValue":"采集图像","keyValue":"采集图像","lasttime":"采集图像","valueList":["采集图像","grab image","采集图像"]},{"curValue":"左侧相机","keyValue":"左侧相机","lasttime":"左侧相机","valueList":["左侧相机","left cam","左侧相机"]},{"curValue":"请输入相机设置密码","keyValue":"请输入相机设置密码","lasttime":"请输入相机设置密码","valueList":["请输入相机设置密码","pls input cam pwd","请输入相机设置密码"]},{"curValue":"__参考条码","keyValue":"__参考条码","lasttime":"__参考条码","valueList":["__参考条码","ref sn","__参考条码"]},{"curValue":"是否需要 一致 校验","keyValue":"是否需要 一致 校验","lasttime":"是否需要 一致 校验","valueList":["是否需要 一致 校验","must be the same","是否需要 一致 校验"]},{"curValue":"是否需要 不一致 校验","keyValue":"是否需要 不一致 校验","lasttime":"是否需要 不一致 校验","valueList":["是否需要 不一致 校验","must diffrent","是否需要 不一致 校验"]},{"curValue":"一致 校验内容","keyValue":"一致 校验内容","lasttime":"一致 校验内容","valueList":["一致 校验内容","the same content","一致 校验内容"]},{"curValue":"不一致 校验内容","keyValue":"不一致 校验内容","lasttime":"不一致 校验内容","valueList":["不一致 校验内容","different content","不一致 校验内容"]},{"curValue":"侧边栏","keyValue":"侧边栏","lasttime":"侧边栏","valueList":["侧边栏","beside blank","侧边栏"]},{"curValue":"缩放","keyValue":"缩放","lasttime":"缩放","valueList":["缩放","zoom","缩放"]},{"curValue":"相机参数设置","keyValue":"相机参数设置","lasttime":"相机参数设置","valueList":["相机参数设置","camera setting","相机参数设置"]},{"curValue":"相机1 ","keyValue":"相机1 ","lasttime":"相机1 ","valueList":["相机1 ","cam 1","相机1 "]},{"curValue":"接料查询","keyValue":"接料查询","lasttime":"接料查询","valueList":["接料查询","splic result","接料查询"]},{"curValue":"图像","keyValue":"图像","lasttime":"图像","valueList":["图像","image","图像"]},{"curValue":"设备调试","keyValue":"设备调试","lasttime":"设备调试","valueList":["设备调试","machine setting","设备调试"]},{"curValue":"运控卡","keyValue":"运控卡","lasttime":"运控卡","valueList":["运控卡","motion card","运控卡"]},{"curValue":"开始条码校验 条码1。。。。","keyValue":"开始条码校验 条码1。。。。","lasttime":"开始条码校验 条码1。。。。","valueList":["开始条码校验 条码1。。。。","start check barcode1","开始条码校验 条码1。。。。"]},{"curValue":"条码长度小于校验总长度 ng","keyValue":"条码长度小于校验总长度 ng","lasttime":"条码长度小于校验总长度 ng","valueList":["条码长度小于校验总长度 ng","the length of barcode is too short","条码长度小于校验总长度 ng"]},{"curValue":"扫条码1 成功","keyValue":"扫条码1 成功","lasttime":"扫条码1 成功","valueList":["扫条码1 成功","check barcode 1 OK","扫条码1 成功"]},{"curValue":"开始条码校验 条码2。。。。","keyValue":"开始条码校验 条码2。。。。","lasttime":"开始条码校验 条码2。。。。","valueList":["开始条码校验 条码2。。。。","start check barcode2","开始条码校验 条码2。。。。"]},{"curValue":"条码2 校验失败 条码1 特征码=","keyValue":"条码2 校验失败 条码1 特征码=","lasttime":"条码2 校验失败 条码1 特征码=","valueList":["条码2 校验失败 条码1 特征码=","barcode2 check fail attribute code = ","条码2 校验失败 条码1 特征码="]},{"curValue":"条码特征码=","keyValue":"条码特征码=","lasttime":"条码特征码=","valueList":["条码特征码=","barcode attribute code =","条码特征码="]},{"curValue":"条码2 对比失败，请重新扫码，","keyValue":"条码2 对比失败，请重新扫码，","lasttime":"条码2 对比失败，请重新扫码，","valueList":["条码2 对比失败，请重新扫码，","barcode2 check fail","条码2 对比失败，请重新扫码，"]},{"curValue":"时间,条码1,条码2,校验结果,备注","keyValue":"时间,条码1,条码2,校验结果,备注","lasttime":"时间,条码1,条码2,校验结果,备注","valueList":["时间,条码1,条码2,校验结果,备注","time,barcode1,barcode2,splic result,remark","时间,条码1,条码2,校验结果,备注"]},{"curValue":"表格的行数=","keyValue":"表格的行数=","lasttime":"表格的行数=","valueList":["表格的行数=","The number of rows in the table =","表格的行数="]},{"curValue":"1表示使用plC 0表示使用运控卡","keyValue":"1表示使用plC 0表示使用运控卡","lasttime":"1表示使用plC 0表示使用运控卡","valueList":["1表示使用plC 0表示使用运控卡","1 means using plC 0 means using operation control card","1表示使用plC 0表示使用运控卡"]},{"curValue":"1表示使用数字光纤放大器 , 2表示模拟光纤放大器 0表示不使用放大器","keyValue":"1表示使用数字光纤放大器 , 2表示模拟光纤放大器 0表示不使用放大器","lasttime":"1表示使用数字光纤放大器 , 2表示模拟光纤放大器 0表示不使用放大器","valueList":["1表示使用数字光纤放大器 , 2表示模拟光纤放大器 0表示不使用放大器","1 means digital fiber amplifier is used, 2 means analog fiber amplifier 0 means no amplifier is used","1表示使用数字光纤放大器 , 2表示模拟光纤放大器 0表示不使用放大器"]},{"curValue":"1：是 0：否","keyValue":"1：是 0：否","lasttime":"1：是 0：否","valueList":["1：是 0：否","1: Yes, 0: No","1：是 0：否"]},{"curValue":"左边光纤写入完成——空料查找","keyValue":"左边光纤写入完成——空料查找","lasttime":"左边光纤写入完成——空料查找","valueList":["左边光纤写入完成——空料查找","Left fiber write complete - blank search","左边光纤写入完成——空料查找"]},{"curValue":"右边光纤写入完成——空料查找","keyValue":"右边光纤写入完成——空料查找","lasttime":"右边光纤写入完成——空料查找","valueList":["右边光纤写入完成——空料查找","Right fiber write complete - blank search","右边光纤写入完成——空料查找"]},{"curValue":"复位完成","keyValue":"复位完成","lasttime":"复位完成","valueList":["复位完成","Reset to complete","复位完成"]},{"curValue":"_预留15","keyValue":"_预留15","lasttime":"_预留15","valueList":["_预留15","_ allow 15","_预留15"]},{"curValue":"流道里面有料带异常","keyValue":"流道里面有料带异常","lasttime":"流道里面有料带异常","valueList":["流道里面有料带异常","There is abnormal material belt in the runner","流道里面有料带异常"]},{"curValue":"流道入口感应异常","keyValue":"流道入口感应异常","lasttime":"流道入口感应异常","valueList":["流道入口感应异常","Abnormal induction at inlet of flow passage","流道入口感应异常"]},{"curValue":"1=显示 0=不显示","keyValue":"1=显示 0=不显示","lasttime":"1=显示 0=不显示","valueList":["1=显示 0=不显示","1= display 0= no display","1=显示 0=不显示"]},{"curValue":"0~4000之间，中间用',' 逗号分隔","keyValue":"0~4000之间，中间用',' 逗号分隔","lasttime":"0~4000之间，中间用',' 逗号分隔","valueList":["0~4000之间，中间用',' 逗号分隔","Between 0 and 4000, separated by ',' comma","0~4000之间，中间用',' 逗号分隔"]},{"curValue":"当地与此电压，，就应该更换电池","keyValue":"当地与此电压，，就应该更换电池","lasttime":"当地与此电压，，就应该更换电池","valueList":["当地与此电压，，就应该更换电池","Local with this voltage, the battery should be replaced","当地与此电压，，就应该更换电池"]},{"curValue":"1=百分比显示 , 0 = 电压显示","keyValue":"1=百分比显示 , 0 = 电压显示","lasttime":"1=百分比显示 , 0 = 电压显示","valueList":["1=百分比显示 , 0 = 电压显示","1= percentage display, 0 = voltage display","1=百分比显示 , 0 = 电压显示"]},{"curValue":"8~20之间","keyValue":"8~20之间","lasttime":"8~20之间","valueList":["8~20之间","Between 8 ~ 20","8~20之间"]},{"curValue":"0 不启用，1 启用","keyValue":"0 不启用，1 启用","lasttime":"0 不启用，1 启用","valueList":["0 不启用，1 启用","0 is not enabled, 1 is enabled","0 不启用，1 启用"]},{"curValue":"本地ip2","keyValue":"本地ip2","lasttime":"本地ip2","valueList":["本地ip2","Local ip2","本地ip2"]},{"curValue":"如果值填 10 则表示1mm等于10个像素","keyValue":"如果值填 10 则表示1mm等于10个像素","lasttime":"如果值填 10 则表示1mm等于10个像素","valueList":["如果值填 10 则表示1mm等于10个像素","If the value is 10, then 1mm equals 10 pixels","如果值填 10 则表示1mm等于10个像素"]},{"curValue":"0=普通 1=软触发 2=硬件触发","keyValue":"0=普通 1=软触发 2=硬件触发","lasttime":"0=普通 1=软触发 2=硬件触发","valueList":["0=普通 1=软触发 2=硬件触发","0= normal 1= soft trigger 2= hardware trigger","0=普通 1=软触发 2=硬件触发"]},{"curValue":"设置__绑定本地通信的端口号","keyValue":"设置__绑定本地通信的端口号","lasttime":"设置__绑定本地通信的端口号","valueList":["设置__绑定本地通信的端口号","Sets the port number for __ bound local communications","设置__绑定本地通信的端口号"]},{"curValue":"单位像素","keyValue":"单位像素","lasttime":"单位像素","valueList":["单位像素","The unit pixel","单位像素"]},{"curValue":"1或 -1","keyValue":"1或 -1","lasttime":"1或 -1","valueList":["1或 -1","1 or 1","1或 -1"]},{"curValue":"左侧曝光调整开始","keyValue":"左侧曝光调整开始","lasttime":"左侧曝光调整开始","valueList":["左侧曝光调整开始","Left exposure adjustment begins","左侧曝光调整开始"]},{"curValue":"左拍照补偿","keyValue":"左拍照补偿","lasttime":"左拍照补偿","valueList":["左拍照补偿","Left photo compensation","左拍照补偿"]},{"curValue":"左侧曝光调整拍照开始","keyValue":"左侧曝光调整拍照开始","lasttime":"左侧曝光调整拍照开始","valueList":["左侧曝光调整拍照开始","Left exposure adjustment starts the photo","左侧曝光调整拍照开始"]},{"curValue":"右拍照补偿","keyValue":"右拍照补偿","lasttime":"右拍照补偿","valueList":["右拍照补偿","Right photo compensation","右拍照补偿"]},{"curValue":"1表示开始高速模式， 0表示正常模式","keyValue":"1表示开始高速模式， 0表示正常模式","lasttime":"1表示开始高速模式， 0表示正常模式","valueList":["1表示开始高速模式， 0表示正常模式","1 means start high speed mode, 0 means normal mode","1表示开始高速模式， 0表示正常模式"]},{"curValue":"1表示启用， 0表示正常模式复位","keyValue":"1表示启用， 0表示正常模式复位","lasttime":"1表示启用， 0表示正常模式复位","valueList":["1表示启用， 0表示正常模式复位","1 means enabled and 0 means reset in normal mode","1表示启用， 0表示正常模式复位"]},{"curValue":"0=图像处理并保存完成后，1=图像处理完成后，2=图像抓取完成后（没处理）","keyValue":"0=图像处理并保存完成后，1=图像处理完成后，2=图像抓取完成后（没处理）","lasttime":"0=图像处理并保存完成后，1=图像处理完成后，2=图像抓取完成后（没处理）","valueList":["0=图像处理并保存完成后，1=图像处理完成后，2=图像抓取完成后（没处理）","0= After image processing and saving, 1= after image processing, 2= after image capture (no processing)","0=图像处理并保存完成后，1=图像处理完成后，2=图像抓取完成后（没处理）"]},{"curValue":"总时间=0ms","keyValue":"总时间=0ms","lasttime":"总时间=0ms","valueList":["总时间=0ms","The total time = 0, ms","总时间=0ms"]},{"curValue":"间距选择弹框触发","keyValue":"间距选择弹框触发","lasttime":"间距选择弹框触发","valueList":["间距选择弹框触发","Spacing selection pop-up trigger","间距选择弹框触发"]},{"curValue":"间距选择弹框2mm","keyValue":"间距选择弹框2mm","lasttime":"间距选择弹框2mm","valueList":["间距选择弹框2mm","Spacing selection for 2mm bounding box","间距选择弹框2mm"]},{"curValue":"间距选择弹框4mm","keyValue":"间距选择弹框4mm","lasttime":"间距选择弹框4mm","valueList":["间距选择弹框4mm","Spacing selection: bullet frame 4mm","间距选择弹框4mm"]},{"curValue":"执行完成D:\\HistoryData\\Borwin_SplicMachine_Vivo\\Log\\\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Data\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Config\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Alarm\r\n","keyValue":"执行完成D:\\HistoryData\\Borwin_SplicMachine_Vivo\\Log\\\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Data\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Config\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Alarm\r\n","lasttime":"执行完成D:\\HistoryData\\Borwin_SplicMachine_Vivo\\Log\\\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Data\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Config\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Alarm\r\n","valueList":["执行完成D:\\HistoryData\\Borwin_SplicMachine_Vivo\\Log\\\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Data\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Config\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Alarm\r\n","completesD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Log\\\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Data\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Config\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Alarm\r\n","执行完成D:\\HistoryData\\Borwin_SplicMachine_Vivo\\Log\\\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Data\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Config\r\nD:\\HistoryData\\Borwin_SplicMachine_Vivo\\Alarm\r\n"]},{"curValue":"_本地对接=0,_udp客户端=1,_tcp客户端=2,_串口客户端=3,_http客户端Get=4,_udp服务器=5,_tcp服务器=6,_串口服务器=7, _其他方式=8,此参数 重启软件后生效","keyValue":"_本地对接=0,_udp客户端=1,_tcp客户端=2,_串口客户端=3,_http客户端Get=4,_udp服务器=5,_tcp服务器=6,_串口服务器=7, _其他方式=8,此参数 重启软件后生效","lasttime":"_本地对接=0,_udp客户端=1,_tcp客户端=2,_串口客户端=3,_http客户端Get=4,_udp服务器=5,_tcp服务器=6,_串口服务器=7, _其他方式=8,此参数 重启软件后生效","valueList":["_本地对接=0,_udp客户端=1,_tcp客户端=2,_串口客户端=3,_http客户端Get=4,_udp服务器=5,_tcp服务器=6,_串口服务器=7, _其他方式=8,此参数 重启软件后生效","_ Local docking =0, _UDP client =1, _TCP client =2,_ serial port client =3, _HTTP client Get=4, _UDP server =5, _TCP server =6,_ serial port server =7, _ other mode =8. This parameter takes effect after restarting the software","_本地对接=0,_udp客户端=1,_tcp客户端=2,_串口客户端=3,_http客户端Get=4,_udp服务器=5,_tcp服务器=6,_串口服务器=7, _其他方式=8,此参数 重启软件后生效"]},{"curValue":"客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 workFlag = true表示 可以接料 workFlag = false 表示 不可以接料 ","keyValue":"客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 workFlag = true表示 可以接料 workFlag = false 表示 不可以接料 ","lasttime":"客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 workFlag = true表示 可以接料 workFlag = false 表示 不可以接料 ","valueList":["客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 workFlag = true表示 可以接料 workFlag = false 表示 不可以接料 ","In client mode, the format of the value sent by the client actively; workFlag = true; workFlag = false; no feeding allowed","客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 workFlag = true表示 可以接料 workFlag = false 表示 不可以接料 "]},{"curValue":"客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 包含 \"ok\" 表示可接料 ng或其他都认为是不可以接料 ","keyValue":"客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 包含 \"ok\" 表示可接料 ng或其他都认为是不可以接料 ","lasttime":"客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 包含 \"ok\" 表示可接料 ng或其他都认为是不可以接料 ","valueList":["客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 包含 \"ok\" 表示可接料 ng或其他都认为是不可以接料 ","In client mode, the client verifies the return value. In server mode, the client actively sends the value in the form of \"OK\" to indicate that it is acceptable to receive ng or others","客户端模式，客户校验后的返回值 服务端模式 客户主动发送的值的格式 包含 \"ok\" 表示可接料 ng或其他都认为是不可以接料 "]},{"curValue":"回车=\\r 换行=\\n ","keyValue":"回车=\\r 换行=\\n ","lasttime":"回车=\\r 换行=\\n ","valueList":["回车=\\r 换行=\\n ","Enter =\\r newline =\\n","回车=\\r 换行=\\n "]},{"curValue":"1返回 0不返回","keyValue":"1返回 0不返回","lasttime":"1返回 0不返回","valueList":["1返回 0不返回","1 returns 0, not 0","1返回 0不返回"]},{"curValue":"当应答消息为空时 表示 直接返回接收到的消息","keyValue":"当应答消息为空时 表示 直接返回接收到的消息","lasttime":"当应答消息为空时 表示 直接返回接收到的消息","valueList":["当应答消息为空时 表示 直接返回接收到的消息","When the reply message is empty, the received message is returned directly","当应答消息为空时 表示 直接返回接收到的消息"]},{"curValue":"1返回 0不返回 在接收到客户端信息时，是否立即返回应答消息，","keyValue":"1返回 0不返回 在接收到客户端信息时，是否立即返回应答消息，","lasttime":"1返回 0不返回 在接收到客户端信息时，是否立即返回应答消息，","valueList":["1返回 0不返回 在接收到客户端信息时，是否立即返回应答消息，","1 returns 0 does not return whether a reply message is returned immediately upon receiving client information,","1返回 0不返回 在接收到客户端信息时，是否立即返回应答消息，"]},{"curValue":"左侧相机曝光调整--","keyValue":"左侧相机曝光调整--","lasttime":"左侧相机曝光调整--","valueList":["左侧相机曝光调整--","Left camera exposure adjustment --","左侧相机曝光调整--"]},{"curValue":"右侧相机曝光调整---","keyValue":"右侧相机曝光调整---","lasttime":"右侧相机曝光调整---","valueList":["右侧相机曝光调整---","Right camera exposure adjustment --","右侧相机曝光调整---"]},{"curValue":"屏蔽间距","keyValue":"屏蔽间距","lasttime":"屏蔽间距","valueList":["屏蔽间距","Shielding spacing","屏蔽间距"]},{"curValue":"控制","keyValue":"控制","lasttime":"控制","valueList":["控制","control","控制"]},{"curValue":"间距=两孔之间","keyValue":"间距=两孔之间","lasttime":"间距=两孔之间","valueList":["间距=两孔之间","Spacing = between two holes","间距=两孔之间"]},{"curValue":"宽度","keyValue":"宽度","lasttime":"宽度","valueList":["宽度","The width of the","宽度"]},{"curValue":"切刀位\r\n不屏蔽","keyValue":"切刀位\r\n不屏蔽","lasttime":"切刀位\r\n不屏蔽","valueList":["切刀位\r\n不屏蔽","Cutter bit \r\n unshielded","切刀位\r\n不屏蔽"]},{"curValue":"对接位\r\n不屏蔽","keyValue":"对接位\r\n不屏蔽","lasttime":"对接位\r\n不屏蔽","valueList":["对接位\r\n不屏蔽","Docking bit \r\n unshielded","对接位\r\n不屏蔽"]},{"curValue":"切刀位\r\n屏蔽","keyValue":"切刀位\r\n屏蔽","lasttime":"切刀位\r\n屏蔽","valueList":["切刀位\r\n屏蔽","Cutter bit \r\n shielding","切刀位\r\n屏蔽"]},{"curValue":"对接位\r\n屏蔽","keyValue":"对接位\r\n屏蔽","lasttime":"对接位\r\n屏蔽","valueList":["对接位\r\n屏蔽","Docking bit \r\n shielding","对接位\r\n屏蔽"]},{"curValue":"孔中心4","keyValue":"孔中心4","lasttime":"孔中心4","valueList":["孔中心4","4 hole center","孔中心4"]},{"curValue":"孔边","keyValue":"孔边","lasttime":"孔边","valueList":["孔边","The side of hole","孔边"]},{"curValue":"报警电压","keyValue":"报警电压","lasttime":"报警电压","valueList":["报警电压","Alarm voltage","报警电压"]},{"curValue":"报警电压显示方式","keyValue":"报警电压显示方式","lasttime":"报警电压显示方式","valueList":["报警电压显示方式","Alarm voltage display mode","报警电压显示方式"]},{"curValue":"100%电量对应的电压值","keyValue":"100%电量对应的电压值","lasttime":"100%电量对应的电压值","valueList":["100%电量对应的电压值","Voltage value corresponding to 100% electric quantity","100%电量对应的电压值"]},{"curValue":"保存ng图片","keyValue":"保存ng图片","lasttime":"保存ng图片","valueList":["保存ng图片","Save ng image","保存ng图片"]},{"curValue":"保存OK图片","keyValue":"保存OK图片","lasttime":"保存OK图片","valueList":["保存OK图片","Save the OK image","保存OK图片"]},{"curValue":"相机抓取图像的超时时间设置","keyValue":"相机抓取图像的超时时间设置","lasttime":"相机抓取图像的超时时间设置","valueList":["相机抓取图像的超时时间设置","Time out Settings for camera capture images","相机抓取图像的超时时间设置"]},{"curValue":"相机_控制指令包超时时间","keyValue":"相机_控制指令包超时时间","lasttime":"相机_控制指令包超时时间","valueList":["相机_控制指令包超时时间","Camera _ control instruction package timeout time","相机_控制指令包超时时间"]},{"curValue":"图像缓存个数","keyValue":"图像缓存个数","lasttime":"图像缓存个数","valueList":["图像缓存个数","Number of image caches","图像缓存个数"]},{"curValue":"是否通过路由器连接相机","keyValue":"是否通过路由器连接相机","lasttime":"是否通过路由器连接相机","valueList":["是否通过路由器连接相机","Whether the camera is connected via a router","是否通过路由器连接相机"]},{"curValue":"是否打印模拟拍照文件名称","keyValue":"是否打印模拟拍照文件名称","lasttime":"是否打印模拟拍照文件名称","valueList":["是否打印模拟拍照文件名称","Whether to print the name of the simulated photo file","是否打印模拟拍照文件名称"]},{"curValue":"面积最小值","keyValue":"面积最小值","lasttime":"面积最小值","valueList":["面积最小值","Minimum area value","面积最小值"]},{"curValue":"面积最大值","keyValue":"面积最大值","lasttime":"面积最大值","valueList":["面积最大值","Maximum area","面积最大值"]},{"curValue":"左侧偏移1或2类型的参考值","keyValue":"左侧偏移1或2类型的参考值","lasttime":"左侧偏移1或2类型的参考值","valueList":["左侧偏移1或2类型的参考值","A reference value of type 1 or 2 offset to the left","左侧偏移1或2类型的参考值"]},{"curValue":"右侧偏移1或2类型的参考值","keyValue":"右侧偏移1或2类型的参考值","lasttime":"右侧偏移1或2类型的参考值","valueList":["右侧偏移1或2类型的参考值","A reference value of type 1 or 2 offset to the right","右侧偏移1或2类型的参考值"]},{"curValue":"料带背景和料带胶纸阈值","keyValue":"料带背景和料带胶纸阈值","lasttime":"料带背景和料带胶纸阈值","valueList":["料带背景和料带胶纸阈值","Tape background and tape tape threshold","料带背景和料带胶纸阈值"]},{"curValue":"是否使用PLC_","keyValue":"是否使用PLC_","lasttime":"是否使用PLC_","valueList":["是否使用PLC_","Whether to use PLC_","是否使用PLC_"]},{"curValue":"bFlagplc调试界面是否自动读取数据","keyValue":"bFlagplc调试界面是否自动读取数据","lasttime":"bFlagplc调试界面是否自动读取数据","valueList":["bFlagplc调试界面是否自动读取数据","BFlagplc debug interface automatically read data","bFlagplc调试界面是否自动读取数据"]},{"curValue":"电压检测模块端口号","keyValue":"电压检测模块端口号","lasttime":"电压检测模块端口号","valueList":["电压检测模块端口号","Voltage detection module port number","电压检测模块端口号"]},{"curValue":"bflag是否显示模拟量数值","keyValue":"bflag是否显示模拟量数值","lasttime":"bflag是否显示模拟量数值","valueList":["bflag是否显示模拟量数值","Whether BFLAG displays analog quantity values","bflag是否显示模拟量数值"]},{"curValue":"是否启动界面扫码屏蔽按钮","keyValue":"是否启动界面扫码屏蔽按钮","lasttime":"是否启动界面扫码屏蔽按钮","valueList":["是否启动界面扫码屏蔽按钮","Whether to start the screen scan screen button","是否启动界面扫码屏蔽按钮"]},{"curValue":"最大图像缓存个数","keyValue":"最大图像缓存个数","lasttime":"最大图像缓存个数","valueList":["最大图像缓存个数","Maximum number of image caches","最大图像缓存个数"]},{"curValue":"裁切底边到圆心距离","keyValue":"裁切底边到圆心距离","lasttime":"裁切底边到圆心距离","valueList":["裁切底边到圆心距离","Cut the bottom edge to the center of the circle","裁切底边到圆心距离"]},{"curValue":"补偿裁切位置阈值","keyValue":"补偿裁切位置阈值","lasttime":"补偿裁切位置阈值","valueList":["补偿裁切位置阈值","Compensation for cutting position threshold","补偿裁切位置阈值"]},{"curValue":"外边圆下方灰度比例1","keyValue":"外边圆下方灰度比例1","lasttime":"外边圆下方灰度比例1","valueList":["外边圆下方灰度比例1","Gray scale ratio 1 below the outer circle","外边圆下方灰度比例1"]},{"curValue":"numfullCount判断最小个数","keyValue":"numfullCount判断最小个数","lasttime":"numfullCount判断最小个数","valueList":["numfullCount判断最小个数","NumfullCount judges the minimum number","numfullCount判断最小个数"]},{"curValue":"cnt连续几个空料认为前面无料","keyValue":"cnt连续几个空料认为前面无料","lasttime":"cnt连续几个空料认为前面无料","valueList":["cnt连续几个空料认为前面无料","CNT continuous several empty material that no material in front","cnt连续几个空料认为前面无料"]},{"curValue":"cnt透明料带cut个数补偿","keyValue":"cnt透明料带cut个数补偿","lasttime":"cnt透明料带cut个数补偿","valueList":["cnt透明料带cut个数补偿","Compensation for the number of CNT transparent tape cuts","cnt透明料带cut个数补偿"]},{"curValue":"cnt黑料带cut个数补偿","keyValue":"cnt黑料带cut个数补偿","lasttime":"cnt黑料带cut个数补偿","valueList":["cnt黑料带cut个数补偿","Compensation for the number of CNT black tape cuts","cnt黑料带cut个数补偿"]},{"curValue":"thes黑料带最小判断标准","keyValue":"thes黑料带最小判断标准","lasttime":"thes黑料带最小判断标准","valueList":["thes黑料带最小判断标准","Thes black belt is the minimum standard","thes黑料带最小判断标准"]},{"curValue":"纸料带和黑料带有料比例","keyValue":"纸料带和黑料带有料比例","lasttime":"纸料带和黑料带有料比例","valueList":["纸料带和黑料带有料比例","Paper tape and black tape with feed ratio","纸料带和黑料带有料比例"]},{"curValue":"sc相机软件切换到硬件触发的延时","keyValue":"sc相机软件切换到硬件触发的延时","lasttime":"sc相机软件切换到硬件触发的延时","valueList":["sc相机软件切换到硬件触发的延时","Sc camera software switches to a hardware triggered delay","sc相机软件切换到硬件触发的延时"]},{"curValue":"pitch曝光时间","keyValue":"pitch曝光时间","lasttime":"pitch曝光时间","valueList":["pitch曝光时间","Pitch exposure time","pitch曝光时间"]},{"curValue":"pitch检测比例阈值","keyValue":"pitch检测比例阈值","lasttime":"pitch检测比例阈值","valueList":["pitch检测比例阈值","Pitch detection ratio threshold","pitch检测比例阈值"]},{"curValue":"等待打开光源的时间（ms）","keyValue":"等待打开光源的时间（ms）","lasttime":"等待打开光源的时间（ms）","valueList":["等待打开光源的时间（ms）","Time to wait for light to turn on (MS)","等待打开光源的时间（ms）"]},{"curValue":"sc8mm长宽比例","keyValue":"sc8mm长宽比例","lasttime":"sc8mm长宽比例","valueList":["sc8mm长宽比例","Sc8mm length to width ratio","sc8mm长宽比例"]},{"curValue":"sc12mm长宽比例","keyValue":"sc12mm长宽比例","lasttime":"sc12mm长宽比例","valueList":["sc12mm长宽比例","Sc12mm length-width ratio","sc12mm长宽比例"]},{"curValue":"sc16mm长宽比例","keyValue":"sc16mm长宽比例","lasttime":"sc16mm长宽比例","valueList":["sc16mm长宽比例","Sc16mm length to width ratio","sc16mm长宽比例"]},{"curValue":"相机设置的密码","keyValue":"相机设置的密码","lasttime":"相机设置的密码","valueList":["相机设置的密码","The password set by the camera","相机设置的密码"]},{"curValue":"显示前后两张图像的时间间隔","keyValue":"显示前后两张图像的时间间隔","lasttime":"显示前后两张图像的时间间隔","valueList":["显示前后两张图像的时间间隔","Show the interval between the two images","显示前后两张图像的时间间隔"]},{"curValue":"左侧起开始检测位置","keyValue":"左侧起开始检测位置","lasttime":"左侧起开始检测位置","valueList":["左侧起开始检测位置","Left start to check position","左侧起开始检测位置"]},{"curValue":"右侧起结束检测位置","keyValue":"右侧起结束检测位置","lasttime":"右侧起结束检测位置","valueList":["右侧起结束检测位置","The right side of the test","右侧起结束检测位置"]},{"curValue":"超过拍照次数无料则报警_","keyValue":"超过拍照次数无料则报警_","lasttime":"超过拍照次数无料则报警_","valueList":["超过拍照次数无料则报警_","If no material has been taken for more than one time, it will alarm _","超过拍照次数无料则报警_"]},{"curValue":"最低检测到料的数量后才发给plc","keyValue":"最低检测到料的数量后才发给plc","lasttime":"最低检测到料的数量后才发给plc","valueList":["最低检测到料的数量后才发给plc","Send to PLC after the minimum quantity of material is detected","最低检测到料的数量后才发给plc"]},{"curValue":"最低检测到料带次数才处理图像","keyValue":"最低检测到料带次数才处理图像","lasttime":"最低检测到料带次数才处理图像","valueList":["最低检测到料带次数才处理图像","Minimum detection of tape times to process images","最低检测到料带次数才处理图像"]},{"curValue":"delay延时拍照时间","keyValue":"delay延时拍照时间","lasttime":"delay延时拍照时间","valueList":["delay延时拍照时间","Delay time of taking pictures","delay延时拍照时间"]},{"curValue":"delay延时补拍次数","keyValue":"delay延时补拍次数","lasttime":"delay延时补拍次数","valueList":["delay延时补拍次数","Delay retouching times","delay延时补拍次数"]},{"curValue":"是否开启高速模式","keyValue":"是否开启高速模式","lasttime":"是否开启高速模式","valueList":["是否开启高速模式","Whether to turn on high speed mode","是否开启高速模式"]},{"curValue":"是否使用新的图像处理方式","keyValue":"是否使用新的图像处理方式","lasttime":"是否使用新的图像处理方式","valueList":["是否使用新的图像处理方式","Whether to use a new image processing method","是否使用新的图像处理方式"]},{"curValue":"通过路由器连接相机是的本地ip地址","keyValue":"通过路由器连接相机是的本地ip地址","lasttime":"通过路由器连接相机是的本地ip地址","valueList":["通过路由器连接相机是的本地ip地址","Connecting to the camera via a router is the local IP address","通过路由器连接相机是的本地ip地址"]},{"curValue":"曝光时间","keyValue":"曝光时间","lasttime":"曝光时间","valueList":["曝光时间","Exposure time","曝光时间"]},{"curValue":"增益系数","keyValue":"增益系数","lasttime":"增益系数","valueList":["增益系数","Gain coefficient","增益系数"]},{"curValue":"异步模式下停止取图时间ms","keyValue":"异步模式下停止取图时间ms","lasttime":"异步模式下停止取图时间ms","valueList":["异步模式下停止取图时间ms","Stop drawing in asynchronous mode at ms","异步模式下停止取图时间ms"]},{"curValue":"像素和mm的比例X","keyValue":"像素和mm的比例X","lasttime":"像素和mm的比例X","valueList":["像素和mm的比例X","The ratio of pixels to mm X","像素和mm的比例X"]},{"curValue":"像素和mm的比例Y","keyValue":"像素和mm的比例Y","lasttime":"像素和mm的比例Y","valueList":["像素和mm的比例Y","The ratio of pixels to mm, Y","像素和mm的比例Y"]},{"curValue":"取图触发模式","keyValue":"取图触发模式","lasttime":"取图触发模式","valueList":["取图触发模式","Fetch the graph trigger mode","取图触发模式"]},{"curValue":"4mm两孔距离对应的像素值1","keyValue":"4mm两孔距离对应的像素值1","lasttime":"4mm两孔距离对应的像素值1","valueList":["4mm两孔距离对应的像素值1","The pixel value corresponding to the distance between two holes of 4mm is 1","4mm两孔距离对应的像素值1"]},{"curValue":"裁切左位置1","keyValue":"裁切左位置1","lasttime":"裁切左位置1","valueList":["裁切左位置1","Cut left position 1","裁切左位置1"]},{"curValue":"裁切底位置1","keyValue":"裁切底位置1","lasttime":"裁切底位置1","valueList":["裁切底位置1","Cut bottom position 1","裁切底位置1"]},{"curValue":"补偿多切料数量","keyValue":"补偿多切料数量","lasttime":"补偿多切料数量","valueList":["补偿多切料数量","Compensates for the amount of multiple cuts","补偿多切料数量"]},{"curValue":"纸料带阈值最小值","keyValue":"纸料带阈值最小值","lasttime":"纸料带阈值最小值","valueList":["纸料带阈值最小值","Minimum paper tape threshold","纸料带阈值最小值"]},{"curValue":"黑色塑胶阈值最大值","keyValue":"黑色塑胶阈值最大值","lasttime":"黑色塑胶阈值最大值","valueList":["黑色塑胶阈值最大值","Maximum black plastic threshold","黑色塑胶阈值最大值"]},{"curValue":"视觉补偿基准值1","keyValue":"视觉补偿基准值1","lasttime":"视觉补偿基准值1","valueList":["视觉补偿基准值1","Visual compensation reference value 1","视觉补偿基准值1"]},{"curValue":"视觉补偿方向__","keyValue":"视觉补偿方向__","lasttime":"视觉补偿方向__","valueList":["视觉补偿方向__","Direction of visual compensation","视觉补偿方向__"]},{"curValue":"min0201有料分界值","keyValue":"min0201有料分界值","lasttime":"min0201有料分界值","valueList":["min0201有料分界值","Min0201 feed boundary value","min0201有料分界值"]},{"curValue":"透明料带阈值","keyValue":"透明料带阈值","lasttime":"透明料带阈值","valueList":["透明料带阈值","Transparent tape threshold","透明料带阈值"]},{"curValue":"va透明料带的曝光值","keyValue":"va透明料带的曝光值","lasttime":"va透明料带的曝光值","valueList":["va透明料带的曝光值","Va transparent tape exposure value","va透明料带的曝光值"]},{"curValue":"va黑料带的曝光值_","keyValue":"va黑料带的曝光值_","lasttime":"va黑料带的曝光值_","valueList":["va黑料带的曝光值_","Va black tape exposure _","va黑料带的曝光值_"]},{"curValue":"va默认的曝光值","keyValue":"va默认的曝光值","lasttime":"va默认的曝光值","valueList":["va默认的曝光值","The default va exposure value","va默认的曝光值"]},{"curValue":"透明的阈值的公差","keyValue":"透明的阈值的公差","lasttime":"透明的阈值的公差","valueList":["透明的阈值的公差","Transparent threshold tolerance","透明的阈值的公差"]},{"curValue":"t发送完成信号的时刻","keyValue":"t发送完成信号的时刻","lasttime":"t发送完成信号的时刻","valueList":["t发送完成信号的时刻","T is the moment when the signal is sent","t发送完成信号的时刻"]},{"curValue":"mes对接类型","keyValue":"mes对接类型","lasttime":"mes对接类型","valueList":["mes对接类型","Mes butt type","mes对接类型"]},{"curValue":"mes_对接参考数据_详细版","keyValue":"mes_对接参考数据_详细版","lasttime":"mes_对接参考数据_详细版","valueList":["mes_对接参考数据_详细版","Mes_ Docking reference data _ detailed edition","mes_对接参考数据_详细版"]},{"curValue":"mes_对接参考数据_简易版","keyValue":"mes_对接参考数据_简易版","lasttime":"mes_对接参考数据_简易版","valueList":["mes_对接参考数据_简易版","Mes_ Docking reference data _ Simplified version","mes_对接参考数据_简易版"]},{"curValue":"-------------以下为客户端模式----------------","keyValue":"-------------以下为客户端模式----------------","lasttime":"-------------以下为客户端模式----------------","valueList":["-------------以下为客户端模式----------------","-- The following is the client mode","-------------以下为客户端模式----------------"]},{"curValue":"对接类型1--客户Udp服务器_IP","keyValue":"对接类型1--客户Udp服务器_IP","lasttime":"对接类型1--客户Udp服务器_IP","valueList":["对接类型1--客户Udp服务器_IP","Docking type 1-- client Udp server _IP","对接类型1--客户Udp服务器_IP"]},{"curValue":"对接类型1--客户Udp服务器_端口号","keyValue":"对接类型1--客户Udp服务器_端口号","lasttime":"对接类型1--客户Udp服务器_端口号","valueList":["对接类型1--客户Udp服务器_端口号","Docking type 1-- client Udp server _ port number","对接类型1--客户Udp服务器_端口号"]},{"curValue":"对接类型2--客户Tcp服务器_IP","keyValue":"对接类型2--客户Tcp服务器_IP","lasttime":"对接类型2--客户Tcp服务器_IP","valueList":["对接类型2--客户Tcp服务器_IP","Docking type 2-- Client Tcp server _IP","对接类型2--客户Tcp服务器_IP"]},{"curValue":"对接类型2--客户Tcp服务器_端口号","keyValue":"对接类型2--客户Tcp服务器_端口号","lasttime":"对接类型2--客户Tcp服务器_端口号","valueList":["对接类型2--客户Tcp服务器_端口号","Docking type 2-- Client Tcp server _ port number","对接类型2--客户Tcp服务器_端口号"]},{"curValue":"对接类型3/7--本地MES串口端口号","keyValue":"对接类型3/7--本地MES串口端口号","lasttime":"对接类型3/7--本地MES串口端口号","valueList":["对接类型3/7--本地MES串口端口号","Docking type 3/7-- local MES serial port number","对接类型3/7--本地MES串口端口号"]},{"curValue":"对接类型4--客户Http服务器_条码校验Url","keyValue":"对接类型4--客户Http服务器_条码校验Url","lasttime":"对接类型4--客户Http服务器_条码校验Url","valueList":["对接类型4--客户Http服务器_条码校验Url","Docking type 4-- Client Http server _ bar code check Url","对接类型4--客户Http服务器_条码校验Url"]},{"curValue":"对接类型4--客户Http服务器_接料完成确认Url","keyValue":"对接类型4--客户Http服务器_接料完成确认Url","lasttime":"对接类型4--客户Http服务器_接料完成确认Url","valueList":["对接类型4--客户Http服务器_接料完成确认Url","Docking type 4-- Client Http server _ Url for receiving completion confirmation","对接类型4--客户Http服务器_接料完成确认Url"]},{"curValue":"对接类型1/2/3/4--mes返回等待时间","keyValue":"对接类型1/2/3/4--mes返回等待时间","lasttime":"对接类型1/2/3/4--mes返回等待时间","valueList":["对接类型1/2/3/4--mes返回等待时间","Docking type 1/2/3/4-- MES return wait time","对接类型1/2/3/4--mes返回等待时间"]},{"curValue":"-------------以下为服务器模式----------------","keyValue":"-------------以下为服务器模式----------------","lasttime":"-------------以下为服务器模式----------------","valueList":["-------------以下为服务器模式----------------","-- The following is the server mode","-------------以下为服务器模式----------------"]},{"curValue":"对接类型5--本地Udp服务器_端口号1","keyValue":"对接类型5--本地Udp服务器_端口号1","lasttime":"对接类型5--本地Udp服务器_端口号1","valueList":["对接类型5--本地Udp服务器_端口号1","Docking type 5-- local Udp server _ port number 1","对接类型5--本地Udp服务器_端口号1"]},{"curValue":"对接类型6--本地Tcp服务器_端口号","keyValue":"对接类型6--本地Tcp服务器_端口号","lasttime":"对接类型6--本地Tcp服务器_端口号","valueList":["对接类型6--本地Tcp服务器_端口号","Docking type 6-- Local Tcp server _ port number","对接类型6--本地Tcp服务器_端口号"]},{"curValue":"对接类型5/6/7--bFlag任何消息都认为OK","keyValue":"对接类型5/6/7--bFlag任何消息都认为OK","lasttime":"对接类型5/6/7--bFlag任何消息都认为OK","valueList":["对接类型5/6/7--bFlag任何消息都认为OK","Docking type 5/6/7-- Any message from bFlag is considered OK","对接类型5/6/7--bFlag任何消息都认为OK"]},{"curValue":"对接类型5/6/7--返回的NG信息","keyValue":"对接类型5/6/7--返回的NG信息","lasttime":"对接类型5/6/7--返回的NG信息","valueList":["对接类型5/6/7--返回的NG信息","Docking type 5/6/7-- NG information returned","对接类型5/6/7--返回的NG信息"]},{"curValue":"对接类型5/6/7--NG是否返回消息","keyValue":"对接类型5/6/7--NG是否返回消息","lasttime":"对接类型5/6/7--NG是否返回消息","valueList":["对接类型5/6/7--NG是否返回消息","Docking type 5/6/7-- whether NG returns a message or not","对接类型5/6/7--NG是否返回消息"]},{"curValue":"对接类型5/6/7--默认应答消息内容","keyValue":"对接类型5/6/7--默认应答消息内容","lasttime":"对接类型5/6/7--默认应答消息内容","valueList":["对接类型5/6/7--默认应答消息内容","Docking type 5/6/7-- the default reply message content","对接类型5/6/7--默认应答消息内容"]},{"curValue":"对接类型5/6/7--bFlag是否返回应答消息","keyValue":"对接类型5/6/7--bFlag是否返回应答消息","lasttime":"对接类型5/6/7--bFlag是否返回应答消息","valueList":["对接类型5/6/7--bFlag是否返回应答消息","Docking type 5/6/7-- whether bFlag returns a reply message","对接类型5/6/7--bFlag是否返回应答消息"]},{"curValue":"24mm拨出位","keyValue":"24mm拨出位","lasttime":"24mm拨出位","valueList":["24mm拨出位","24mmDial the outing","24mm拨出位"]},{"curValue":"底膜拨出位","keyValue":"底膜拨出位","lasttime":"底膜拨出位","valueList":["底膜拨出位","Basement membrane displacement","底膜拨出位"]},{"curValue":"右灯","keyValue":"右灯","lasttime":"右灯","valueList":["右灯","right light","右灯"]},{"curValue":"左灯","keyValue":"左灯","lasttime":"左灯","valueList":["左灯","Left light","左灯"]},{"curValue":"至贴底膜位","keyValue":"至贴底膜位","lasttime":"至贴底膜位","valueList":["至贴底膜位","To the base film position","至贴底膜位"]},{"curValue":"拨刀2整体","keyValue":"拨刀2整体","lasttime":"拨刀2整体","valueList":["拨刀2整体","Chuck 2 whole","拨刀2整体"]},{"curValue":"24mm上膜真空","keyValue":"24mm上膜真空","lasttime":"24mm上膜真空","valueList":["24mm上膜真空","24mmThe vacuum membrane","24mm上膜真空"]},{"curValue":"24mm底膜真空","keyValue":"24mm底膜真空","lasttime":"24mm底膜真空","valueList":["24mm底膜真空","24mmAt the end of the vacuum membrane","24mm底膜真空"]},{"curValue":"底膜翻转至原点位","keyValue":"底膜翻转至原点位","lasttime":"底膜翻转至原点位","valueList":["底膜翻转至原点位","The bottom membrane reverses to the origin","底膜翻转至原点位"]},{"curValue":"底膜翻转至贴合位","keyValue":"底膜翻转至贴合位","lasttime":"底膜翻转至贴合位","valueList":["底膜翻转至贴合位","Flip the bottom membrane to the fitting position","底膜翻转至贴合位"]},{"curValue":"底膜电磁铁","keyValue":"底膜电磁铁","lasttime":"底膜电磁铁","valueList":["底膜电磁铁","Bottom film electromagnet","底膜电磁铁"]},{"curValue":"24mm上膜","keyValue":"24mm上膜","lasttime":"24mm上膜","valueList":["24mm上膜","24mmIn the film","24mm上膜"]},{"curValue":"24mm底膜位","keyValue":"24mm底膜位","lasttime":"24mm底膜位","valueList":["24mm底膜位","24mmA bottom membrane","24mm底膜位"]},{"curValue":"16mm位","keyValue":"16mm位","lasttime":"16mm位","valueList":["16mm位","16mmlocation","16mm位"]},{"curValue":"12mm位","keyValue":"12mm位","lasttime":"12mm位","valueList":["12mm位","12mmlocation","12mm位"]},{"curValue":"打印log日志时间超时","keyValue":"打印log日志时间超时","lasttime":"打印log日志时间超时","valueList":["打印log日志时间超时","Print log log time timeout","打印log日志时间超时"]},{"curValue":"0 = 不显示 ，1 = 显示","keyValue":"0 = 不显示 ，1 = 显示","lasttime":"0 = 不显示 ，1 = 显示","valueList":["0 = 不显示 ，1 = 显示","0 = no display, 1 = display","0 = 不显示 ，1 = 显示"]},{"curValue":"接料超时异常","keyValue":"接料超时异常","lasttime":"接料超时异常","valueList":["接料超时异常","Abnormal receiving time out","接料超时异常"]},{"curValue":"从站PLC通讯异常","keyValue":"从站PLC通讯异常","lasttime":"从站PLC通讯异常","valueList":["从站PLC通讯异常","The slave station PLC communication is abnormal","从站PLC通讯异常"]},{"curValue":"回原点超时异常","keyValue":"回原点超时异常","lasttime":"回原点超时异常","valueList":["回原点超时异常","Return to origin timeout exception","回原点超时异常"]},{"curValue":"流道调宽电机异常","keyValue":"流道调宽电机异常","lasttime":"流道调宽电机异常","valueList":["流道调宽电机异常","Abnormal flow width motor","流道调宽电机异常"]},{"curValue":"拨刀2电机异常","keyValue":"拨刀2电机异常","lasttime":"拨刀2电机异常","valueList":["拨刀2电机异常","Blade 2 motor is abnormal","拨刀2电机异常"]},{"curValue":"本地ip3","keyValue":"本地ip3","lasttime":"本地ip3","valueList":["本地ip3","Loca lip3","本地ip3"]},{"curValue":"gige 相机3","keyValue":"gige 相机3","lasttime":"gige 相机3","valueList":["gige 相机3","gige camera 3","gige 相机3"]},{"curValue":"本地ip4","keyValue":"本地ip4","lasttime":"本地ip4","valueList":["本地ip4","Local ip4","本地ip4"]},{"curValue":"gige 相机4","keyValue":"gige 相机4","lasttime":"gige 相机4","valueList":["gige 相机4","gige camera 4","gige 相机4"]},{"curValue":"相机曝光度设置成功! 曝光时间=","keyValue":"相机曝光度设置成功! 曝光时间=","lasttime":"相机曝光度设置成功! 曝光时间=","valueList":["相机曝光度设置成功! 曝光时间=","Camera exposure set successfully! Exposure time=","相机曝光度设置成功! 曝光时间="]},{"curValue":"切断位置 = 孔中心","keyValue":"切断位置 = 孔中心","lasttime":"切断位置 = 孔中心","valueList":["切断位置 = 孔中心","Cutting position = center of hole","切断位置 = 孔中心"]},{"curValue":"切断位置 = 两孔之间","keyValue":"切断位置 = 两孔之间","lasttime":"切断位置 = 两孔之间","valueList":["切断位置 = 两孔之间","Cutting position = Between the two holes","切断位置 = 两孔之间"]},{"curValue":"切断位置 = 孔边","keyValue":"切断位置 = 孔边","lasttime":"切断位置 = 孔边","valueList":["切断位置 = 孔边","Cutting position = The side of hole","切断位置 = 孔边"]},{"curValue":"总时间=15.6303ms","keyValue":"总时间=15.6303ms","lasttime":"总时间=15.6303ms","valueList":["总时间=15.6303ms","total time=15.6303ms","总时间=15.6303ms"]},{"curValue":"接料完成，数据更新完成","keyValue":"接料完成，数据更新完成","lasttime":"接料完成，数据更新完成","valueList":["接料完成，数据更新完成","Feeding finished, data update completed","接料完成，数据更新完成"]},{"curValue":"24mm宽度","keyValue":"24mm宽度","lasttime":"24mm宽度","valueList":["24mm宽度","24mmWidth","24mm宽度"]},{"curValue":"24mm相关参数","keyValue":"24mm相关参数","lasttime":"24mm相关参数","valueList":["24mm相关参数","24mmrelevant parameter","24mm相关参数"]},{"curValue":"总时间=15.6263ms","keyValue":"总时间=15.6263ms","lasttime":"总时间=15.6263ms","valueList":["总时间=15.6263ms","total time=15.6263ms","总时间=15.6263ms"]},{"curValue":"总时间=15.6247ms","keyValue":"总时间=15.6247ms","lasttime":"总时间=15.6247ms","valueList":["总时间=15.6247ms","total time=15.6247ms","总时间=15.6247ms"]},{"curValue":"分解间距222","keyValue":"分解间距222","lasttime":"分解间距222","valueList":["分解间距222","Decomposition spacing222","分解间距222"]},{"curValue":"分解间距333","keyValue":"分解间距333","lasttime":"分解间距333","valueList":["分解间距333","Decomposition spacing333","分解间距333"]},{"curValue":"分解间距444","keyValue":"分解间距444","lasttime":"分解间距444","valueList":["分解间距444","Decomposition spacing444","分解间距444"]},{"curValue":"间距判断222","keyValue":"间距判断222","lasttime":"间距判断222","valueList":["间距判断222","Interval judgment222","间距判断222"]},{"curValue":"空料比例","keyValue":"空料比例","lasttime":"空料比例","valueList":["空料比例","Empty material proportion","空料比例"]},{"curValue":"总时间=15.6222ms","keyValue":"总时间=15.6222ms","lasttime":"总时间=15.6222ms","valueList":["总时间=15.6222ms","total time=15.6222ms","总时间=15.6222ms"]},{"curValue":"总时间=15.6258ms","keyValue":"总时间=15.6258ms","lasttime":"总时间=15.6258ms","valueList":["总时间=15.6258ms","total time=15.6258ms","总时间=15.6258ms"]},{"curValue":"总时间=15.6257ms","keyValue":"总时间=15.6257ms","lasttime":"总时间=15.6257ms","valueList":["总时间=15.6257ms","total time=15.6257ms","总时间=15.6257ms"]},{"curValue":"参数变更,","keyValue":"参数变更,","lasttime":"参数变更,","valueList":["参数变更,","Parameters change,","参数变更,"]},{"curValue":"总时间=15.6283ms","keyValue":"总时间=15.6283ms","lasttime":"总时间=15.6283ms","valueList":["总时间=15.6283ms","total time=15.6283ms","总时间=15.6283ms"]},{"curValue":"总时间=15.6273ms","keyValue":"总时间=15.6273ms","lasttime":"总时间=15.6273ms","valueList":["总时间=15.6273ms","total time=15.6273ms","总时间=15.6273ms"]},{"curValue":"总时间=15.6242ms","keyValue":"总时间=15.6242ms","lasttime":"总时间=15.6242ms","valueList":["总时间=15.6242ms","total time=15.6242ms","总时间=15.6242ms"]},{"curValue":"总时间=15.6268ms","keyValue":"总时间=15.6268ms","lasttime":"总时间=15.6268ms","valueList":["总时间=15.6268ms","total time=15.6268ms","总时间=15.6268ms"]},{"curValue":"总时间=15.6237ms","keyValue":"总时间=15.6237ms","lasttime":"总时间=15.6237ms","valueList":["总时间=15.6237ms","total time=15.6237ms","总时间=15.6237ms"]},{"curValue":"总时间=15.6231ms","keyValue":"总时间=15.6231ms","lasttime":"总时间=15.6231ms","valueList":["总时间=15.6231ms","total time=15.6231ms","总时间=15.6231ms"]},{"curValue":"总时间=15.6243ms","keyValue":"总时间=15.6243ms","lasttime":"总时间=15.6243ms","valueList":["总时间=15.6243ms","total time=15.6243ms","总时间=15.6243ms"]},{"curValue":"总时间=15.6267ms","keyValue":"总时间=15.6267ms","lasttime":"总时间=15.6267ms","valueList":["总时间=15.6267ms","total time=15.6267ms","总时间=15.6267ms"]},{"curValue":"总时间=15.6252ms","keyValue":"总时间=15.6252ms","lasttime":"总时间=15.6252ms","valueList":["总时间=15.6252ms","total time=15.6252ms","总时间=15.6252ms"]},{"curValue":"总时间=15.6262ms","keyValue":"总时间=15.6262ms","lasttime":"总时间=15.6262ms","valueList":["总时间=15.6262ms","total time=15.6262ms","总时间=15.6262ms"]},{"curValue":"总时间=15.6272ms","keyValue":"总时间=15.6272ms","lasttime":"总时间=15.6272ms","valueList":["总时间=15.6272ms","total time=15.6272ms","总时间=15.6272ms"]},{"curValue":"总时间=15.6248ms","keyValue":"总时间=15.6248ms","lasttime":"总时间=15.6248ms","valueList":["总时间=15.6248ms","total time=15.6248ms","总时间=15.6248ms"]},{"curValue":"总时间=15.6253ms","keyValue":"总时间=15.6253ms","lasttime":"总时间=15.6253ms","valueList":["总时间=15.6253ms","total time=15.6253ms","总时间=15.6253ms"]},{"curValue":"总时间=15.6227ms","keyValue":"总时间=15.6227ms","lasttime":"总时间=15.6227ms","valueList":["总时间=15.6227ms","total time=15.6227ms","总时间=15.6227ms"]},{"curValue":"0 = 不屏蔽 ， 1 = 屏蔽","keyValue":"0 = 不屏蔽 ， 1 = 屏蔽","lasttime":"0 = 不屏蔽 ， 1 = 屏蔽","valueList":["0 = 不屏蔽 ， 1 = 屏蔽","0 = unmasking, 1 = masking","0 = 不屏蔽 ， 1 = 屏蔽"]},{"curValue":"左侧料仓门","keyValue":"左侧料仓门","lasttime":"左侧料仓门","valueList":["左侧料仓门","Left bin door","左侧料仓门"]},{"curValue":"右侧料仓门","keyValue":"右侧料仓门","lasttime":"右侧料仓门","valueList":["右侧料仓门","Right bin door","右侧料仓门"]},{"curValue":"凸轮异常","keyValue":"凸轮异常","lasttime":"凸轮异常","valueList":["凸轮异常","Abnormal CAM","凸轮异常"]},{"curValue":"吸胶膜异常","keyValue":"吸胶膜异常","lasttime":"吸胶膜异常","valueList":["吸胶膜异常","Abnormal suction film","吸胶膜异常"]},{"curValue":"电池电量低","keyValue":"电池电量低","lasttime":"电池电量低","valueList":["电池电量低","Low battery","电池电量低"]},{"curValue":"试用次数满","keyValue":"试用次数满","lasttime":"试用次数满","valueList":["试用次数满","Full trial number","试用次数满"]},{"curValue":"割膜直流电机异常","keyValue":"割膜直流电机异常","lasttime":"割膜直流电机异常","valueList":["割膜直流电机异常","The film cutting DC motor is abnormal","割膜直流电机异常"]},{"curValue":"底膜翻转直流电机异常","keyValue":"底膜翻转直流电机异常","lasttime":"底膜翻转直流电机异常","valueList":["底膜翻转直流电机异常","Abnormal bottom film flip DC motor","底膜翻转直流电机异常"]},{"curValue":"推拉门打开异常","keyValue":"推拉门打开异常","lasttime":"推拉门打开异常","valueList":["推拉门打开异常","Sliding door opening abnormal","推拉门打开异常"]},{"curValue":"两侧料带间距不一致","keyValue":"两侧料带间距不一致","lasttime":"两侧料带间距不一致","valueList":["两侧料带间距不一致","The spacing between the two sides is inconsistent","两侧料带间距不一致"]},{"curValue":"左找空料中","keyValue":"左找空料中","lasttime":"左找空料中","valueList":["左找空料中","Look left in the blanks","左找空料中"]},{"curValue":"右找空料中","keyValue":"右找空料中","lasttime":"右找空料中","valueList":["右找空料中","Look right in the blanks","右找空料中"]},{"curValue":"0=旧版本，1=新版本","keyValue":"0=旧版本，1=新版本","lasttime":"0=旧版本，1=新版本","valueList":["0=旧版本，1=新版本","0= old version, 1= new version","0=旧版本，1=新版本"]},{"curValue":"0 = 不启用，1 = 启用","keyValue":"0 = 不启用，1 = 启用","lasttime":"0 = 不启用，1 = 启用","valueList":["0 = 不启用，1 = 启用","0 = not enabled, 1 = enabled","0 = 不启用，1 = 启用"]},{"curValue":"0 = 默认显示 1 = 放大显示","keyValue":"0 = 默认显示 1 = 放大显示","lasttime":"0 = 默认显示 1 = 放大显示","valueList":["0 = 默认显示 1 = 放大显示","0 = Default display 1 = enlarged display","0 = 默认显示 1 = 放大显示"]},{"curValue":"0 = 不比对 1 = 启用比对","keyValue":"0 = 不比对 1 = 启用比对","lasttime":"0 = 不比对 1 = 启用比对","valueList":["0 = 不比对 1 = 启用比对","0 = no alignment 1 = enable alignment","0 = 不比对 1 = 启用比对"]},{"curValue":"0 = 允许 1 = 不允许","keyValue":"0 = 允许 1 = 不允许","lasttime":"0 = 允许 1 = 不允许","valueList":["0 = 允许 1 = 不允许","0 = allowed 1 = not allowed","0 = 允许 1 = 不允许"]},{"curValue":"(0=不启用，1=自动设置)手动调节范围：1000~2500，调节步长：100","keyValue":"(0=不启用，1=自动设置)手动调节范围：1000~2500，调节步长：100","lasttime":"(0=不启用，1=自动设置)手动调节范围：1000~2500，调节步长：100","valueList":["(0=不启用，1=自动设置)手动调节范围：1000~2500，调节步长：100","(0= not enabled, 1= automatic setting) Manual adjustment range: 1000~2500, adjustment step size: 100","(0=不启用，1=自动设置)手动调节范围：1000~2500，调节步长：100"]},{"curValue":"1启用 0不启用","keyValue":"1启用 0不启用","lasttime":"1启用 0不启用","valueList":["1启用 0不启用","1 enabled 0 not enabled","1启用 0不启用"]},{"curValue":"plc未连接，请连接后再试","keyValue":"plc未连接，请连接后再试","lasttime":"plc未连接，请连接后再试","valueList":["plc未连接，请连接后再试","The PLC is not connected, please try again after connecting","plc未连接，请连接后再试"]},{"curValue":"FD模组","keyValue":"FD模组","lasttime":"FD模组","valueList":["FD模组","Fd module","FD模组"]},{"curValue":"FD取料完成/回原点","keyValue":"FD取料完成/回原点","lasttime":"FD取料完成/回原点","valueList":["FD取料完成/回原点","FD feeding complete/return to the origin","FD取料完成/回原点"]},{"curValue":"FD等待取膜","keyValue":"FD等待取膜","lasttime":"FD等待取膜","valueList":["FD等待取膜","FD waits for film extraction","FD等待取膜"]},{"curValue":"FD取膜位","keyValue":"FD取膜位","lasttime":"FD取膜位","valueList":["FD取膜位","FD in membrane","FD取膜位"]},{"curValue":"FD安全位","keyValue":"FD安全位","lasttime":"FD安全位","valueList":["FD安全位","FD security a","FD安全位"]},{"curValue":"剪切安全位","keyValue":"剪切安全位","lasttime":"剪切安全位","valueList":["剪切安全位","Shear safety level","剪切安全位"]},{"curValue":"剪切工作位","keyValue":"剪切工作位","lasttime":"剪切工作位","valueList":["剪切工作位","Shear working position","剪切工作位"]},{"curValue":"接料完成延时","keyValue":"接料完成延时","lasttime":"接料完成延时","valueList":["接料完成延时","There is a delay in the completion of feeding","接料完成延时"]},{"curValue":"左剪切位 -<—>+","keyValue":"左剪切位 -<—>+","lasttime":"左剪切位 -<—>+","valueList":["左剪切位 -<—>+","Shear a left -<—>+","左剪切位 -<—>+"]},{"curValue":"右剪切位 +<—>-","keyValue":"右剪切位 +<—>-","lasttime":"右剪切位 +<—>-","valueList":["右剪切位 +<—>-","Shear a right +<—>-","右剪切位 +<—>-"]},{"curValue":"左对接位 -<—>+","keyValue":"左对接位 -<—>+","lasttime":"左对接位 -<—>+","valueList":["左对接位 -<—>+","Left a docking -<—>+","左对接位 -<—>+"]},{"curValue":"右对接位 +<—>-","keyValue":"右对接位 +<—>-","lasttime":"右对接位 +<—>-","valueList":["右对接位 +<—>-","Docking a right +<—>-","右对接位 +<—>-"]},{"curValue":"关闭CCD","keyValue":"关闭CCD","lasttime":"关闭CCD","valueList":["关闭CCD","Close the CCD","关闭CCD"]},{"curValue":"开启CCD","keyValue":"开启CCD","lasttime":"开启CCD","valueList":["开启CCD","Open the CCD","开启CCD"]},{"curValue":"剪切/包膜","keyValue":"剪切/包膜","lasttime":"剪切/包膜","valueList":["剪切/包膜","Shear/envelop","剪切/包膜"]},{"curValue":"剪切完成","keyValue":"剪切完成","lasttime":"剪切完成","valueList":["剪切完成","Shear complete","剪切完成"]},{"curValue":"接料完成","keyValue":"接料完成","lasttime":"接料完成","valueList":["接料完成","Material to complete","接料完成"]},{"curValue":"速度","keyValue":"速度","lasttime":"速度","valueList":["速度","speed","速度"]},{"curValue":"包膜完成","keyValue":"包膜完成","lasttime":"包膜完成","valueList":["包膜完成","Coated finish","包膜完成"]},{"curValue":"供给","keyValue":"供给","lasttime":"供给","valueList":["供给","supply","供给"]},{"curValue":"真空阀","keyValue":"真空阀","lasttime":"真空阀","valueList":["真空阀","Vacuum valve","真空阀"]},{"curValue":"当前","keyValue":"当前","lasttime":"当前","valueList":["当前","The current","当前"]},{"curValue":"对接2","keyValue":"对接2","lasttime":"对接2","valueList":["对接2","Docking 2","对接2"]},{"curValue":"对接1","keyValue":"对接1","lasttime":"对接1","valueList":["对接1","1 docking","对接1"]},{"curValue":"切刀2","keyValue":"切刀2","lasttime":"切刀2","valueList":["切刀2","Cutter 2","切刀2"]},{"curValue":"切刀1","keyValue":"切刀1","lasttime":"切刀1","valueList":["切刀1","Cutter 1","切刀1"]},{"curValue":"厚度2","keyValue":"厚度2","lasttime":"厚度2","valueList":["厚度2","The thickness of 2","厚度2"]},{"curValue":"厚度1","keyValue":"厚度1","lasttime":"厚度1","valueList":["厚度1","The thickness of 1","厚度1"]},{"curValue":"吸贴模组","keyValue":"吸贴模组","lasttime":"吸贴模组","valueList":["吸贴模组","Suction module","吸贴模组"]},{"curValue":"吸膜等待","keyValue":"吸膜等待","lasttime":"吸膜等待","valueList":["吸膜等待","Membrane absorption waiting","吸膜等待"]},{"curValue":"贴附位","keyValue":"贴附位","lasttime":"贴附位","valueList":["贴附位","Attached with a","贴附位"]},{"curValue":"贴附等待","keyValue":"贴附等待","lasttime":"贴附等待","valueList":["贴附等待","Attached with a wait","贴附等待"]},{"curValue":"吸膜位","keyValue":"吸膜位","lasttime":"吸膜位","valueList":["吸膜位","Membrane absorption a","吸膜位"]},{"curValue":"是否显示日志窗口","keyValue":"是否显示日志窗口","lasttime":"是否显示日志窗口","valueList":["是否显示日志窗口","Whether to display the log window","是否显示日志窗口"]},{"curValue":"Flag是否使用厚度检测","keyValue":"Flag是否使用厚度检测","lasttime":"Flag是否使用厚度检测","valueList":["Flag是否使用厚度检测","Whether Flag uses thickness detection","Flag是否使用厚度检测"]},{"curValue":"是否使用MES给定Pitch","keyValue":"是否使用MES给定Pitch","lasttime":"是否使用MES给定Pitch","valueList":["是否使用MES给定Pitch","Whether MES was used for a given Pitch","是否使用MES给定Pitch"]},{"curValue":"是否启用1pich料带检测","keyValue":"是否启用1pich料带检测","lasttime":"是否启用1pich料带检测","valueList":["是否启用1pich料带检测","Whether to enable 1PICH strip detection","是否启用1pich料带检测"]},{"curValue":"图像窗口文本","keyValue":"图像窗口文本","lasttime":"图像窗口文本","valueList":["图像窗口文本","Image window text","图像窗口文本"]},{"curValue":"图像窗口文本大小","keyValue":"图像窗口文本大小","lasttime":"图像窗口文本大小","valueList":["图像窗口文本大小","Image window text size","图像窗口文本大小"]},{"curValue":"两测料带间距比对","keyValue":"两测料带间距比对","lasttime":"两测料带间距比对","valueList":["两测料带间距比对","The spacing ratio between the two test strips","两测料带间距比对"]},{"curValue":"手动间距切换","keyValue":"手动间距切换","lasttime":"手动间距切换","valueList":["手动间距切换","Manual spacing switch","手动间距切换"]},{"curValue":"黑色料带阈值","keyValue":"黑色料带阈值","lasttime":"黑色料带阈值","valueList":["黑色料带阈值","Black tape threshold","黑色料带阈值"]},{"curValue":"对接类型5/6/7--返回的OK信息","keyValue":"对接类型5/6/7--返回的OK信息","lasttime":"对接类型5/6/7--返回的OK信息","valueList":["对接类型5/6/7--返回的OK信息","Docking type 5/6/7-- OK message returned","对接类型5/6/7--返回的OK信息"]},{"curValue":"对接类型6时--本地扫码","keyValue":"对接类型6时--本地扫码","lasttime":"对接类型6时--本地扫码","valueList":["对接类型6时--本地扫码","Docking type 6 - local scan code","对接类型6时--本地扫码"]},{"curValue":"提取料号","keyValue":"提取料号","lasttime":"提取料号","valueList":["提取料号","Extracted materials issue","提取料号"]},{"curValue":"1=显示 0=不显示","keyValue":"1=显示 0=不显示","lasttime":"1=显示 0=不显示","valueList":["1=显示 0=不显示","1= Display 0= no display","1=显示 0=不显示"]},{"curValue":"7/10之间","keyValue":"7/10之间","lasttime":"7/10之间","valueList":["7/10之间","Between 7/10","7/10之间"]},{"curValue":"0 = 可以修改 ，1 = 不能修改","keyValue":"0 = 可以修改 ，1 = 不能修改","lasttime":"0 = 可以修改 ，1 = 不能修改","valueList":["0 = 可以修改 ，1 = 不能修改","0 = can be modified, 1 = cannot be modified","0 = 可以修改 ，1 = 不能修改"]},{"curValue":"0 = 不启用 ，1 = 启用","keyValue":"0 = 不启用 ，1 = 启用","lasttime":"0 = 不启用 ，1 = 启用","valueList":["0 = 不启用 ，1 = 启用","0 = disable, 1 = enable","0 = 不启用 ，1 = 启用"]},{"curValue":"左侧等待测量","keyValue":"左侧等待测量","lasttime":"左侧等待测量","valueList":["左侧等待测量","Left side waiting measurement","左侧等待测量"]},{"curValue":"右侧等待测量","keyValue":"右侧等待测量","lasttime":"右侧等待测量","valueList":["右侧等待测量","Right side waiting measurement","右侧等待测量"]},{"curValue":"不需要测量","keyValue":"不需要测量","lasttime":"不需要测量","valueList":["不需要测量","You don't need to measure","不需要测量"]},{"curValue":"测量启动","keyValue":"测量启动","lasttime":"测量启动","valueList":["测量启动","Measurement start","测量启动"]},{"curValue":"左测量OK","keyValue":"左测量OK","lasttime":"左测量OK","valueList":["左测量OK","Left to measure OK","左测量OK"]},{"curValue":"左测量NG","keyValue":"左测量NG","lasttime":"左测量NG","valueList":["左测量NG","Left to measure NG","左测量NG"]},{"curValue":"右测量OK","keyValue":"右测量OK","lasttime":"右测量OK","valueList":["右测量OK","The right measure OK","右测量OK"]},{"curValue":"右测量NG","keyValue":"右测量NG","lasttime":"右测量NG","valueList":["右测量NG","The right measure NG","右测量NG"]},{"curValue":"左侧按钮","keyValue":"左侧按钮","lasttime":"左侧按钮","valueList":["左侧按钮","On the left side of the button","左侧按钮"]},{"curValue":"胶膜2送料超时","keyValue":"胶膜2送料超时","lasttime":"胶膜2送料超时","valueList":["胶膜2送料超时","Film 2 feeding time out","胶膜2送料超时"]},{"curValue":"拨刀2回原点超时","keyValue":"拨刀2回原点超时","lasttime":"拨刀2回原点超时","valueList":["拨刀2回原点超时","Dial knife 2 back to origin times out","拨刀2回原点超时"]},{"curValue":"每天早晚8点自动清零","keyValue":"每天早晚8点自动清零","lasttime":"每天早晚8点自动清零","valueList":["每天早晚8点自动清零","It will be cleared automatically at 8 o 'clock every morning and evening","每天早晚8点自动清零"]},{"curValue":"0=不启用， 1=启用","keyValue":"0=不启用， 1=启用","lasttime":"0=不启用， 1=启用","valueList":["0=不启用， 1=启用","0= disable, 1= enable","0=不启用， 1=启用"]},{"curValue":"图像保存天数1--365","keyValue":"图像保存天数1--365","lasttime":"图像保存天数1--365","valueList":["图像保存天数1--365","Image storage days 1--365","图像保存天数1--365"]},{"curValue":"1表示启用， 0表示不启用","keyValue":"1表示启用， 0表示不启用","lasttime":"1表示启用， 0表示不启用","valueList":["1表示启用， 0表示不启用","1 indicates that the function is enabled. 0 indicates that the function is disabled","1表示启用， 0表示不启用"]},{"curValue":"0~60接料中不允许变换轨道 (单位0.1s，0为不启用)","keyValue":"0~60接料中不允许变换轨道 (单位0.1s，0为不启用)","lasttime":"0~60接料中不允许变换轨道 (单位0.1s，0为不启用)","valueList":["0~60接料中不允许变换轨道 (单位0.1s，0为不启用)","0~60 is not allowed to change orbit in the material connection (unit: 0.1s, 0 means not enabled)","0~60接料中不允许变换轨道 (单位0.1s，0为不启用)"]},{"curValue":"左=L 右=R","keyValue":"左=L 右=R","lasttime":"左=L 右=R","valueList":["左=L 右=R","L = L = R right","左=L 右=R"]},{"curValue":"清理过期目录","keyValue":"清理过期目录","lasttime":"清理过期目录","valueList":["清理过期目录","Clearing an Expired Directory","清理过期目录"]},{"curValue":"LCR调试","keyValue":"LCR调试","lasttime":"LCR调试","valueList":["LCR调试","The LCR debugging","LCR调试"]},{"curValue":"上料表","keyValue":"上料表","lasttime":"上料表","valueList":["上料表","Feeding table","上料表"]},{"curValue":"根据实际表格，修改各项所在列","keyValue":"根据实际表格，修改各项所在列","lasttime":"根据实际表格，修改各项所在列","valueList":["根据实际表格，修改各项所在列","Modify the columns of each item according to the actual table","根据实际表格，修改各项所在列"]},{"curValue":"excel中Sheet数","keyValue":"excel中Sheet数","lasttime":"excel中Sheet数","valueList":["excel中Sheet数","Excel Sheet number","excel中Sheet数"]},{"curValue":"物料规格分割后，电阻标准值位置","keyValue":"物料规格分割后，电阻标准值位置","lasttime":"物料规格分割后，电阻标准值位置","valueList":["物料规格分割后，电阻标准值位置","Position of resistance standard value after material specification is divided","物料规格分割后，电阻标准值位置"]},{"curValue":"物料规格分割后，电阻偏差值位置","keyValue":"物料规格分割后，电阻偏差值位置","lasttime":"物料规格分割后，电阻偏差值位置","valueList":["物料规格分割后，电阻偏差值位置","Position of resistance deviation after material specification segmentation","物料规格分割后，电阻偏差值位置"]},{"curValue":"物料规格分割后，电容标准值位置","keyValue":"物料规格分割后，电容标准值位置","lasttime":"物料规格分割后，电容标准值位置","valueList":["物料规格分割后，电容标准值位置","Position of capacitor standard value after material specification is divided","物料规格分割后，电容标准值位置"]},{"curValue":"物料规格分割后，电容偏差值位置","keyValue":"物料规格分割后，电容偏差值位置","lasttime":"物料规格分割后，电容偏差值位置","valueList":["物料规格分割后，电容偏差值位置","Position of capacitance deviation after material specification segmentation","物料规格分割后，电容偏差值位置"]},{"curValue":"0 = 不启用，1 = 启用(测值比对演示时用)","keyValue":"0 = 不启用，1 = 启用(测值比对演示时用)","lasttime":"0 = 不启用，1 = 启用(测值比对演示时用)","valueList":["0 = 不启用，1 = 启用(测值比对演示时用)","0 = disable, 1 = enable (test value comparison demo)","0 = 不启用，1 = 启用(测值比对演示时用)"]},{"curValue":"电阻单位Ω,K,M","keyValue":"电阻单位Ω,K,M","lasttime":"电阻单位Ω,K,M","valueList":["电阻单位Ω,K,M","Resistance units: ω,K,M","电阻单位Ω,K,M"]},{"curValue":"电容单位pF,nF,uF,mF","keyValue":"电容单位pF,nF,uF,mF","lasttime":"电容单位pF,nF,uF,mF","valueList":["电容单位pF,nF,uF,mF","Capacitance units pF,nF,uF,mF","电容单位pF,nF,uF,mF"]},{"curValue":"0 = 不显示，1 = 显示","keyValue":"0 = 不显示，1 = 显示","lasttime":"0 = 不显示，1 = 显示","valueList":["0 = 不显示，1 = 显示","0 = no display, 1 = display","0 = 不显示，1 = 显示"]},{"curValue":"单位pF","keyValue":"单位pF","lasttime":"单位pF","valueList":["单位pF","UnitpF","单位pF"]},{"curValue":"单位pH","keyValue":"单位pH","lasttime":"单位pH","valueList":["单位pH","UnitpH","单位pH"]},{"curValue":"单位Ω","keyValue":"单位Ω","lasttime":"单位Ω","valueList":["单位Ω","UnitΩ","单位Ω"]},{"curValue":"单位MΩ","keyValue":"单位MΩ","lasttime":"单位MΩ","valueList":["单位MΩ","UnitMΩ","单位MΩ"]},{"curValue":"1:启用_与上料表或者MES比对 0:不启用_显示有效值","keyValue":"1:启用_与上料表或者MES比对 0:不启用_显示有效值","lasttime":"1:启用_与上料表或者MES比对 0:不启用_显示有效值","valueList":["1:启用_与上料表或者MES比对 0:不启用_显示有效值","1: enable _ Comparison with feeding table or MES 0: disabled _ Display valid values","1:启用_与上料表或者MES比对 0:不启用_显示有效值"]},{"curValue":"重测设置次数后，弹窗确定认","keyValue":"重测设置次数后，弹窗确定认","lasttime":"重测设置次数后，弹窗确定认","valueList":["重测设置次数后，弹窗确定认","After retesting the number of Settings, the popup window confirms recognition","重测设置次数后，弹窗确定认"]},{"curValue":"左测试仪器地址参数","keyValue":"左测试仪器地址参数","lasttime":"左测试仪器地址参数","valueList":["左测试仪器地址参数","Left test instrument address parameters","左测试仪器地址参数"]},{"curValue":"右测试仪器地址参数","keyValue":"右测试仪器地址参数","lasttime":"右测试仪器地址参数","valueList":["右测试仪器地址参数","Right test instrument address parameters","右测试仪器地址参数"]},{"curValue":"测试物料封装","keyValue":"测试物料封装","lasttime":"测试物料封装","valueList":["测试物料封装","Test material packaging","测试物料封装"]},{"curValue":"端口号可以设置，其他的参数固定为 波特率115200，无校验，8数据位，1停止位 ","keyValue":"端口号可以设置，其他的参数固定为 波特率115200，无校验，8数据位，1停止位 ","lasttime":"端口号可以设置，其他的参数固定为 波特率115200，无校验，8数据位，1停止位 ","valueList":["端口号可以设置，其他的参数固定为 波特率115200，无校验，8数据位，1停止位 ","The port number can be set. Other parameters are fixed to baud rate 115200, no parity, 8 data bits, and 1 stop bit","端口号可以设置，其他的参数固定为 波特率115200，无校验，8数据位，1停止位 "]},{"curValue":"当前操作员名称","keyValue":"当前操作员名称","lasttime":"当前操作员名称","valueList":["当前操作员名称","Current operator name","当前操作员名称"]},{"curValue":"比对超差时确认人员","keyValue":"比对超差时确认人员","lasttime":"比对超差时确认人员","valueList":["比对超差时确认人员","Confirm personnel when comparing out of tolerance","比对超差时确认人员"]},{"curValue":"表格加载异常：","keyValue":"表格加载异常：","lasttime":"表格加载异常：","valueList":["表格加载异常：","Table loading error:","表格加载异常："]},{"curValue":"接料机_PLC","keyValue":"接料机_PLC","lasttime":"接料机_PLC","valueList":["接料机_PLC","PLC","接料机_PLC"]},{"curValue":"LCR测试","keyValue":"LCR测试","lasttime":"LCR测试","valueList":["LCR测试","The LCR test","LCR测试"]},{"curValue":"元件规格","keyValue":"元件规格","lasttime":"元件规格","valueList":["元件规格","Component specification","元件规格"]},{"curValue":"电阻测试","keyValue":"电阻测试","lasttime":"电阻测试","valueList":["电阻测试","Resistance test","电阻测试"]},{"curValue":"电感测试","keyValue":"电感测试","lasttime":"电感测试","valueList":["电感测试","Inductance test","电感测试"]},{"curValue":"电容测试","keyValue":"电容测试","lasttime":"电容测试","valueList":["电容测试","Capacitance test","电容测试"]},{"curValue":"左侧","keyValue":"左侧","lasttime":"左侧","valueList":["左侧","left","左侧"]},{"curValue":"设定测试值","keyValue":"设定测试值","lasttime":"设定测试值","valueList":["设定测试值","Set test value","设定测试值"]},{"curValue":"连续采集","keyValue":"连续采集","lasttime":"连续采集","valueList":["连续采集","Continuous acquisition","连续采集"]},{"curValue":"通信状态","keyValue":"通信状态","lasttime":"通信状态","valueList":["通信状态","Communicate status","通信状态"]},{"curValue":"左侧：","keyValue":"左侧：","lasttime":"左侧：","valueList":["左侧：","On the left:","左侧："]},{"curValue":"右侧：","keyValue":"右侧：","lasttime":"右侧：","valueList":["右侧：","On the right side:","右侧："]},{"curValue":"操作员修改参数","keyValue":"操作员修改参数","lasttime":"操作员修改参数","valueList":["操作员修改参数","Operator modification parameters","操作员修改参数"]},{"curValue":"允许注册新用户","keyValue":"允许注册新用户","lasttime":"允许注册新用户","valueList":["允许注册新用户","Allow registration of new users","允许注册新用户"]},{"curValue":"0条码按钮无效","keyValue":"0条码按钮无效","lasttime":"0条码按钮无效","valueList":["0条码按钮无效","0 Bar code button is invalid","0条码按钮无效"]},{"curValue":"1屏蔽按钮无效","keyValue":"1屏蔽按钮无效","lasttime":"1屏蔽按钮无效","valueList":["1屏蔽按钮无效","1 Mask button invalid","1屏蔽按钮无效"]},{"curValue":"2左边不检空料","keyValue":"2左边不检空料","lasttime":"2左边不检空料","valueList":["2左边不检空料","2 The left side does not check empty material","2左边不检空料"]},{"curValue":"9右边不检空料","keyValue":"9右边不检空料","lasttime":"9右边不检空料","valueList":["9右边不检空料","9 No empty material on the right side","9右边不检空料"]},{"curValue":"3左右不检空料","keyValue":"3左右不检空料","lasttime":"3左右不检空料","valueList":["3左右不检空料","3 Left and right do not check empty material","3左右不检空料"]},{"curValue":"4不需要扫码","keyValue":"4不需要扫码","lasttime":"4不需要扫码","valueList":["4不需要扫码","4 No need to scan","4不需要扫码"]},{"curValue":"5入料启用挂齿动作","keyValue":"5入料启用挂齿动作","lasttime":"5入料启用挂齿动作","valueList":["5入料启用挂齿动作","5 Start hanging action when feeding","5入料启用挂齿动作"]},{"curValue":"6先放料带再扫码","keyValue":"6先放料带再扫码","lasttime":"6先放料带再扫码","valueList":["6先放料带再扫码","6 Feed tape first and then scan code","6先放料带再扫码"]},{"curValue":"7试用期接料次数限制","keyValue":"7试用期接料次数限制","lasttime":"7试用期接料次数限制","valueList":["7试用期接料次数限制","7 Limit the feeding times during the trial period","7试用期接料次数限制"]},{"curValue":"8屏蔽共用一组参数","keyValue":"8屏蔽共用一组参数","lasttime":"8屏蔽共用一组参数","valueList":["8屏蔽共用一组参数","8 Masking shares a set of parameters","8屏蔽共用一组参数"]},{"curValue":"10有预撕模","keyValue":"10有预撕模","lasttime":"10有预撕模","valueList":["10有预撕模","10 Are torn","10有预撕模"]},{"curValue":"11间距旋钮&按钮","keyValue":"11间距旋钮&按钮","lasttime":"11间距旋钮&按钮","valueList":["11间距旋钮&按钮","11 Pitch knobs & buttons","11间距旋钮&按钮"]},{"curValue":"12双收料点动模式","keyValue":"12双收料点动模式","lasttime":"12双收料点动模式","valueList":["12双收料点动模式","12 Double feed moving mode","12双收料点动模式"]},{"curValue":"13简易版","keyValue":"13简易版","lasttime":"13简易版","valueList":["13简易版","13 Simple version of","13简易版"]},{"curValue":"14入料时提前吸膜","keyValue":"14入料时提前吸膜","lasttime":"14入料时提前吸膜","valueList":["14入料时提前吸膜","14 Suction film in advance when feeding","14入料时提前吸膜"]},{"curValue":"15双收料光电屏蔽","keyValue":"15双收料光电屏蔽","lasttime":"15双收料光电屏蔽","valueList":["15双收料光电屏蔽","15 Double receiving photoelectric shielding","15双收料光电屏蔽"]},{"curValue":"纸/黑料带","keyValue":"纸/黑料带","lasttime":"纸/黑料带","valueList":["纸/黑料带","Paper/black tape","纸/黑料带"]},{"curValue":"黑色料带","keyValue":"黑色料带","lasttime":"黑色料带","valueList":["黑色料带","Black strip","黑色料带"]},{"curValue":"透明料带","keyValue":"透明料带","lasttime":"透明料带","valueList":["透明料带","Transparent material","透明料带"]},{"curValue":"关 闭","keyValue":"关 闭","lasttime":"关 闭","valueList":["关 闭","closed","关 闭"]},{"curValue":"1 = 是校验 0 = 不用校验","keyValue":"1 = 是校验 0 = 不用校验","lasttime":"1 = 是校验 0 = 不用校验","valueList":["1 = 是校验 0 = 不用校验","1 = yes check 0 = no check","1 = 是校验 0 = 不用校验"]},{"curValue":"格式 如下x~y; 表示从x到y位，多段需要用;分割 当y=0表示后面所有","keyValue":"格式 如下x~y; 表示从x到y位，多段需要用;分割 当y=0表示后面所有","lasttime":"格式 如下x~y; 表示从x到y位，多段需要用;分割 当y=0表示后面所有","valueList":["格式 如下x~y; 表示从x到y位，多段需要用;分割 当y=0表示后面所有","The format is x to y. From x to y bits, multiple segments need to be used; Partition when y=0 means all the rest","格式 如下x~y; 表示从x到y位，多段需要用;分割 当y=0表示后面所有"]},{"curValue":"0=不替换 2=替换","keyValue":"0=不替换 2=替换","lasttime":"0=不替换 2=替换","valueList":["0=不替换 2=替换","0= no substitution 2= substitution","0=不替换 2=替换"]},{"curValue":"当全部匹配的时候。匹配位数无效","keyValue":"当全部匹配的时候。匹配位数无效","lasttime":"当全部匹配的时候。匹配位数无效","valueList":["当全部匹配的时候。匹配位数无效","When they all match. Invalid matching digit","当全部匹配的时候。匹配位数无效"]},{"curValue":"格式=a|A;b|B; 表示将a替换成A，将b替换成B","keyValue":"格式=a|A;b|B; 表示将a替换成A，将b替换成B","lasttime":"格式=a|A;b|B; 表示将a替换成A，将b替换成B","valueList":["格式=a|A;b|B; 表示将a替换成A，将b替换成B","Format = a | a; B | b; I'm going to replace a with A, and I'm going to replace B with B","格式=a|A;b|B; 表示将a替换成A，将b替换成B"]},{"curValue":"格式=1~5;8~10; 表示将1~5位必须一致，8~10位必须一致","keyValue":"格式=1~5;8~10; 表示将1~5位必须一致，8~10位必须一致","lasttime":"格式=1~5;8~10; 表示将1~5位必须一致，8~10位必须一致","valueList":["格式=1~5;8~10; 表示将1~5位必须一致，8~10位必须一致","Format = 1~ 5; 8~ 10; It must be consistent with the 1 ~ 5, 8~ 10","格式=1~5;8~10; 表示将1~5位必须一致，8~10位必须一致"]},{"curValue":"格式=1~5;8~0; 表示将1~5位必须一致，8~后面所有位必须一致","keyValue":"格式=1~5;8~0; 表示将1~5位必须一致，8~后面所有位必须一致","lasttime":"格式=1~5;8~0; 表示将1~5位必须一致，8~后面所有位必须一致","valueList":["格式=1~5;8~0; 表示将1~5位必须一致，8~后面所有位必须一致","Format = 1 ~ 5; 8 ~ 0; It indicates that the digits from 1 to 5 must be the same, and the digits from 8 to the next must be the same","格式=1~5;8~0; 表示将1~5位必须一致，8~后面所有位必须一致"]},{"curValue":"application name","keyValue":"application name","lasttime":"application name","valueList":["application name","application name","application name"]},{"curValue":"用于区分不同机台","keyValue":"用于区分不同机台","lasttime":"用于区分不同机台","valueList":["用于区分不同机台","用于区分不同机台","用于区分不同机台"]},{"curValue":"ms","keyValue":"ms","lasttime":"ms","valueList":["ms","ms","ms"]},{"curValue":"1：自动清空 0：复扫描新条码才清空","keyValue":"1：自动清空 0：复扫描新条码才清空","lasttime":"1：自动清空 0：复扫描新条码才清空","valueList":["1：自动清空 0：复扫描新条码才清空","1：自动清空 0：复扫描新条码才清空","1：自动清空 0：复扫描新条码才清空"]},{"curValue":"包胶凸轮回原点超时","keyValue":"包胶凸轮回原点超时","lasttime":"包胶凸轮回原点超时","valueList":["包胶凸轮回原点超时","包胶凸轮回原点超时","包胶凸轮回原点超时"]},{"curValue":"拨刀1电机回原点超时","keyValue":"拨刀1电机回原点超时","lasttime":"拨刀1电机回原点超时","valueList":["拨刀1电机回原点超时","拨刀1电机回原点超时","拨刀1电机回原点超时"]},{"curValue":"胶膜1送料超时","keyValue":"胶膜1送料超时","lasttime":"胶膜1送料超时","valueList":["胶膜1送料超时","胶膜1送料超时","胶膜1送料超时"]},{"curValue":"吸胶膜电机回原点超时","keyValue":"吸胶膜电机回原点超时","lasttime":"吸胶膜电机回原点超时","valueList":["吸胶膜电机回原点超时","吸胶膜电机回原点超时","吸胶膜电机回原点超时"]},{"curValue":"真空吸胶膜异常","keyValue":"真空吸胶膜异常","lasttime":"真空吸胶膜异常","valueList":["真空吸胶膜异常","真空吸胶膜异常","真空吸胶膜异常"]},{"curValue":"左右进料带超时异常","keyValue":"左右进料带超时异常","lasttime":"左右进料带超时异常","valueList":["左右进料带超时异常","左右进料带超时异常","左右进料带超时异常"]},{"curValue":"电池电量低异常","keyValue":"电池电量低异常","lasttime":"电池电量低异常","valueList":["电池电量低异常","电池电量低异常","电池电量低异常"]},{"curValue":"流道左右入料感应有料带","keyValue":"流道左右入料感应有料带","lasttime":"流道左右入料感应有料带","valueList":["流道左右入料感应有料带","流道左右入料感应有料带","流道左右入料感应有料带"]},{"curValue":"接料过程超时异常","keyValue":"接料过程超时异常","lasttime":"接料过程超时异常","valueList":["接料过程超时异常","接料过程超时异常","接料过程超时异常"]},{"curValue":"设备回原点过程超时","keyValue":"设备回原点过程超时","lasttime":"设备回原点过程超时","valueList":["设备回原点过程超时","设备回原点过程超时","设备回原点过程超时"]},{"curValue":"流道张合电机回原点超时","keyValue":"流道张合电机回原点超时","lasttime":"流道张合电机回原点超时","valueList":["流道张合电机回原点超时","流道张合电机回原点超时","流道张合电机回原点超时"]},{"curValue":"拨刀2整体回原点超时","keyValue":"拨刀2整体回原点超时","lasttime":"拨刀2整体回原点超时","valueList":["拨刀2整体回原点超时","拨刀2整体回原点超时","拨刀2整体回原点超时"]},{"curValue":"_条码对比NG异常","keyValue":"_条码对比NG异常","lasttime":"_条码对比NG异常","valueList":["_条码对比NG异常","_条码对比NG异常","_条码对比NG异常"]},{"curValue":"_急停按钮按下","keyValue":"_急停按钮按下","lasttime":"_急停按钮按下","valueList":["_急停按钮按下","_急停按钮按下","_急停按钮按下"]},{"curValue":"左侧_测值异常","keyValue":"左侧_测值异常","lasttime":"左侧_测值异常","valueList":["左侧_测值异常","左侧_测值异常","左侧_测值异常"]},{"curValue":"右侧_测值异常","keyValue":"右侧_测值异常","lasttime":"右侧_测值异常","valueList":["右侧_测值异常","右侧_测值异常","右侧_测值异常"]},{"curValue":"左测值前后回零超时","keyValue":"左测值前后回零超时","lasttime":"左测值前后回零超时","valueList":["左测值前后回零超时","左测值前后回零超时","左测值前后回零超时"]},{"curValue":"左测值上下回零超时","keyValue":"左测值上下回零超时","lasttime":"左测值上下回零超时","valueList":["左测值上下回零超时","左测值上下回零超时","左测值上下回零超时"]},{"curValue":"左测值旋转回零超时","keyValue":"左测值旋转回零超时","lasttime":"左测值旋转回零超时","valueList":["左测值旋转回零超时","左测值旋转回零超时","左测值旋转回零超时"]},{"curValue":"右测值前后回零超时","keyValue":"右测值前后回零超时","lasttime":"右测值前后回零超时","valueList":["右测值前后回零超时","右测值前后回零超时","右测值前后回零超时"]},{"curValue":"右测值上下回零超时","keyValue":"右测值上下回零超时","lasttime":"右测值上下回零超时","valueList":["右测值上下回零超时","右测值上下回零超时","右测值上下回零超时"]},{"curValue":"右测值旋转回零超时","keyValue":"右测值旋转回零超时","lasttime":"右测值旋转回零超时","valueList":["右测值旋转回零超时","右测值旋转回零超时","右测值旋转回零超时"]},{"curValue":"0=不启用， ","keyValue":"0=不启用， ","lasttime":"0=不启用， ","valueList":["0=不启用， ","0=不启用， ","0=不启用， "]},{"curValue":"不测值电阻电容，可添加料号至该文件中","keyValue":"不测值电阻电容，可添加料号至该文件中","lasttime":"不测值电阻电容，可添加料号至该文件中","valueList":["不测值电阻电容，可添加料号至该文件中","不测值电阻电容，可添加料号至该文件中","不测值电阻电容，可添加料号至该文件中"]},{"curValue":"1= ，2=_，3=;, 4=-","keyValue":"1= ，2=_，3=;, 4=-","lasttime":"1= ，2=_，3=;, 4=-","valueList":["1= ，2=_，3=;, 4=-","1= ，2=_，3=;, 4=-","1= ，2=_，3=;, 4=-"]},{"curValue":"C%0.25,D%0.5,F%1,G%2,J%5,K%10,M%20,N%30","keyValue":"C%0.25,D%0.5,F%1,G%2,J%5,K%10,M%20,N%30","lasttime":"C%0.25,D%0.5,F%1,G%2,J%5,K%10,M%20,N%30","valueList":["C%0.25,D%0.5,F%1,G%2,J%5,K%10,M%20,N%30","C%0.25,D%0.5,F%1,G%2,J%5,K%10,M%20,N%30","C%0.25,D%0.5,F%1,G%2,J%5,K%10,M%20,N%30"]},{"curValue":"%","keyValue":"%","lasttime":"%","valueList":["%","%","%"]},{"curValue":"0 = 不启用，1 - 6 对应通道","keyValue":"0 = 不启用，1 - 6 对应通道","lasttime":"0 = 不启用，1 - 6 对应通道","valueList":["0 = 不启用，1 - 6 对应通道","0 = 不启用，1 - 6 对应通道","0 = 不启用，1 - 6 对应通道"]},{"curValue":"0 = 不启用，1 = 启用(需要仪器支持)","keyValue":"0 = 不启用，1 = 启用(需要仪器支持)","lasttime":"0 = 不启用，1 = 启用(需要仪器支持)","valueList":["0 = 不启用，1 = 启用(需要仪器支持)","0 = 不启用，1 = 启用(需要仪器支持)","0 = 不启用，1 = 启用(需要仪器支持)"]},{"curValue":"Hz_1pF","keyValue":"Hz_1pF","lasttime":"Hz_1pF","valueList":["Hz_1pF","Hz_1pF","Hz_1pF"]},{"curValue":"Hz_4.7pF","keyValue":"Hz_4.7pF","lasttime":"Hz_4.7pF","valueList":["Hz_4.7pF","Hz_4.7pF","Hz_4.7pF"]},{"curValue":"Hz_47pF","keyValue":"Hz_47pF","lasttime":"Hz_47pF","valueList":["Hz_47pF","Hz_47pF","Hz_47pF"]},{"curValue":"Hz_470pF","keyValue":"Hz_470pF","lasttime":"Hz_470pF","valueList":["Hz_470pF","Hz_470pF","Hz_470pF"]},{"curValue":"Hz_4.7nF","keyValue":"Hz_4.7nF","lasttime":"Hz_4.7nF","valueList":["Hz_4.7nF","Hz_4.7nF","Hz_4.7nF"]},{"curValue":"Hz_47nF","keyValue":"Hz_47nF","lasttime":"Hz_47nF","valueList":["Hz_47nF","Hz_47nF","Hz_47nF"]},{"curValue":"Hz_470nF","keyValue":"Hz_470nF","lasttime":"Hz_470nF","valueList":["Hz_470nF","Hz_470nF","Hz_470nF"]},{"curValue":"Hz_4.7uF","keyValue":"Hz_4.7uF","lasttime":"Hz_4.7uF","valueList":["Hz_4.7uF","Hz_4.7uF","Hz_4.7uF"]},{"curValue":"Hz_47uF","keyValue":"Hz_47uF","lasttime":"Hz_47uF","valueList":["Hz_47uF","Hz_47uF","Hz_47uF"]},{"curValue":"Hz_470uF","keyValue":"Hz_470uF","lasttime":"Hz_470uF","valueList":["Hz_470uF","Hz_470uF","Hz_470uF"]},{"curValue":"17-20之间的转班时间","keyValue":"17-20之间的转班时间","lasttime":"17-20之间的转班时间","valueList":["17-20之间的转班时间","17-20之间的转班时间","17-20之间的转班时间"]},{"curValue":"0~1","keyValue":"0~1","lasttime":"0~1","valueList":["0~1","0~1","0~1"]},{"curValue":"30~90","keyValue":"30~90","lasttime":"30~90","valueList":["30~90","30~90","30~90"]},{"curValue":"5~100ms","keyValue":"5~100ms","lasttime":"5~100ms","valueList":["5~100ms","5~100ms","5~100ms"]},{"curValue":"2000~25500","keyValue":"2000~25500","lasttime":"2000~25500","valueList":["2000~25500","2000~25500","2000~25500"]},{"curValue":"15000~55500","keyValue":"15000~55500","lasttime":"15000~55500","valueList":["15000~55500","15000~55500","15000~55500"]},{"curValue":"500~8000","keyValue":"500~8000","lasttime":"500~8000","valueList":["500~8000","500~8000","500~8000"]},{"curValue":"5000~15000","keyValue":"5000~15000","lasttime":"5000~15000","valueList":["5000~15000","5000~15000","5000~15000"]},{"curValue":"hikrobot, dahua","keyValue":"hikrobot, dahua","lasttime":"hikrobot, dahua","valueList":["hikrobot, dahua","hikrobot, dahua","hikrobot, dahua"]},{"curValue":"600,1024,1080 ","keyValue":"600,1024,1080 ","lasttime":"600,1024,1080 ","valueList":["600,1024,1080 ","600,1024,1080 ","600,1024,1080 "]},{"curValue":"800,1280,1440 ","keyValue":"800,1280,1440 ","lasttime":"800,1280,1440 ","valueList":["800,1280,1440 ","800,1280,1440 ","800,1280,1440 "]},{"curValue":"0~60000","keyValue":"0~60000","lasttime":"0~60000","valueList":["0~60000","0~60000","0~60000"]},{"curValue":"停止","keyValue":"停止","lasttime":"停止","valueList":["停止","停止","停止"]},{"curValue":"MainApplication","keyValue":"MainApplication","lasttime":"MainApplication","valueList":["MainApplication","MainApplication","MainApplication"]},{"curValue":"执行完成D:\\HistoryData\\接料机通用版\\Log\\\r\nD:\\HistoryData\\接料机通用版\\Data\r\nD:\\HistoryData\\接料机通用版\\Config\r\nD:\\HistoryData\\接料机通用版\\Alarm\r\n","keyValue":"执行完成D:\\HistoryData\\接料机通用版\\Log\\\r\nD:\\HistoryData\\接料机通用版\\Data\r\nD:\\HistoryData\\接料机通用版\\Config\r\nD:\\HistoryData\\接料机通用版\\Alarm\r\n","lasttime":"执行完成D:\\HistoryData\\接料机通用版\\Log\\\r\nD:\\HistoryData\\接料机通用版\\Data\r\nD:\\HistoryData\\接料机通用版\\Config\r\nD:\\HistoryData\\接料机通用版\\Alarm\r\n","valueList":["执行完成D:\\HistoryData\\接料机通用版\\Log\\\r\nD:\\HistoryData\\接料机通用版\\Data\r\nD:\\HistoryData\\接料机通用版\\Config\r\nD:\\HistoryData\\接料机通用版\\Alarm\r\n","执行完成D:\\HistoryData\\接料机通用版\\Log\\\r\nD:\\HistoryData\\接料机通用版\\Data\r\nD:\\HistoryData\\接料机通用版\\Config\r\nD:\\HistoryData\\接料机通用版\\Alarm\r\n","执行完成D:\\HistoryData\\接料机通用版\\Log\\\r\nD:\\HistoryData\\接料机通用版\\Data\r\nD:\\HistoryData\\接料机通用版\\Config\r\nD:\\HistoryData\\接料机通用版\\Alarm\r\n"]},{"curValue":"0=不用 ，1=启用","keyValue":"0=不用 ，1=启用","lasttime":"0=不用 ，1=启用","valueList":["0=不用 ，1=启用","0=不用 ，1=启用","0=不用 ，1=启用"]},{"curValue":"监听到文件后延时拷贝","keyValue":"监听到文件后延时拷贝","lasttime":"监听到文件后延时拷贝","valueList":["监听到文件后延时拷贝","监听到文件后延时拷贝","监听到文件后延时拷贝"]},{"curValue":"FrmMain","keyValue":"FrmMain","lasttime":"FrmMain","valueList":["FrmMain","FrmMain","FrmMain"]},{"curValue":"8.2mm","keyValue":"8.2mm","lasttime":"8.2mm","valueList":["8.2mm","8.2mm","8.2mm"]},{"curValue":"24mm","keyValue":"24mm","lasttime":"24mm","valueList":["24mm","24mm","24mm"]},{"curValue":"16mm","keyValue":"16mm","lasttime":"16mm","valueList":["16mm","16mm","16mm"]},{"curValue":"12mm","keyValue":"12mm","lasttime":"12mm","valueList":["12mm","12mm","12mm"]},{"curValue":"08mm","keyValue":"08mm","lasttime":"08mm","valueList":["08mm","08mm","08mm"]},{"curValue":"- ","keyValue":"- ","lasttime":"- ","valueList":["- ","- ","- "]},{"curValue":" |服务器连接正常","keyValue":" |服务器连接正常","lasttime":" |服务器连接正常","valueList":[" |服务器连接正常"," |服务器连接正常"," |服务器连接正常"]},{"curValue":"op1","keyValue":"op1","lasttime":"op1","valueList":["op1","op1","op1"]},{"curValue":"0","keyValue":"0","lasttime":"0","valueList":["0","0","0"]},{"curValue":"1","keyValue":"1","lasttime":"1","valueList":["1","1","1"]},{"curValue":"±","keyValue":"±","lasttime":"±","valueList":["±","±","±"]},{"curValue":".","keyValue":".","lasttime":".","valueList":[".",".","."]},{"curValue":"2","keyValue":"2","lasttime":"2","valueList":["2","2","2"]},{"curValue":"9","keyValue":"9","lasttime":"9","valueList":["9","9","9"]},{"curValue":"3","keyValue":"3","lasttime":"3","valueList":["3","3","3"]},{"curValue":"8","keyValue":"8","lasttime":"8","valueList":["8","8","8"]},{"curValue":"4","keyValue":"4","lasttime":"4","valueList":["4","4","4"]},{"curValue":"7","keyValue":"7","lasttime":"7","valueList":["7","7","7"]},{"curValue":"5","keyValue":"5","lasttime":"5","valueList":["5","5","5"]},{"curValue":"6","keyValue":"6","lasttime":"6","valueList":["6","6","6"]},{"curValue":"button3","keyValue":"button3","lasttime":"button3","valueList":["button3","button3","button3"]}] |